BSoD 0x0000010D on stop and sleep... so far, nothing in the forum helped.

Similar Questions

• P7-1534 HP pavilion desktop PC, stop and sleep problem

  P7-1534 HP pavilion desktop PC, Windows 8, 64 - bit, sometimes when I turned off my PC, the PC does will not off it stays on and I have to use the power button to turn off the PC and today I put the PC to sleep and he did not wake up when I tried to wake up that I had to use the reboot of the PC power button. I did a diagnosis of memory and found no errors.

  Hi dwellas

  I understand that you are having problems with the computer is shut down and not being able to wake up.

  You can have an application or process that runs in the background that not stop correctly. Close all applications on the status bar that you can, make sure you first close all programs, and then try again. If this works, you should see what you have installed which can be the cause of this.

• HP Pavilion x 360: stop and sleep problems

  I've updated for Windows 10 and now my computer won't shut down or sleep. In order to shut down the computer completely I have to restart my computer, and then stop. If I used my computer for more than an hour, it will not be stopped or he wake up from sleep mode. I have updated my drivers and graphics cards, as well as disabled the quick start. I checked the BIOS and there is no update available. I also ran the updates of Windows. At this point, I don't know what else to try.

  Hi @bn485,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook of 360 and problems with the Shut Down mode and sleep.  I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you.

  Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Restart your computer and see if the options have changed.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  I hope that helps.

  Thank you.

• Stop and run option is missing from the Start Menu.

  Original title: Administrator group of experts.

  On the Admin Panel when I want to close I normally press start and the "closing". However the button turn off disappeared and only shows button "quit". In addition the 'run' button is gone as well. How to restore it back to normal?

  It will help with these situations... and, this lesson, I've added a few new commands to my answer of registry file generic copy/paste for these kinds of things:

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• My computer crashes without reason during apparent and I have to stop and start over each time. Can anyone help?

  Hello

  (IMO) tried everything.

  I have an ASUS RoG G73JW Core i7-740QM, 8 GB of RAM, nVIDIDA GeForce 460 M, 500 GB drive HARD, Win7 Home Premium + bloatware shit Asus.
  I had the computer since February 2011. I don't remember what it does freeze the first time, the problem is that it may very well, to operate as 2 weeks or it can freeze 3 times in less than an hour. So I don't really know what the devil is going on.

  I've done two scans anti-virus complete with two different AVs and tried a system restore, but nothing. In the meantime, I have disabled the system restore and stuff cuz he ate far from space HARD drive.

  I also scanned for malware/adware etc... Nothing found. In addition, I have all the updated drivers and other things so is not the problem.

  The last option is to reinstall a full but I'll lose all the settings - yet, it's something that seems more likely with each passing day.

  However, I would like to know if there are others with this problem and how / if they solved.

  Thanks in advance!

  Hello

  Method 1:
  Run the fixit given in the following link and check if this solves the problem.
  http://support.Microsoft.com/mats/slow_windows_performance/
  Method 2:

  Try to optimize Windows 7 for better performance:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.
  
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  If the problem persists, you can check the event log and let us know the error code.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
   
  I hope this helps!

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• P7 - 1126 s WIN8 upgrade worked fine until I got clean install. Now stop and sleep do not work.

  I have a P7 - 1126 s running win7 Premium 64-bit and when I've upgraded to windows 8 that everything was working properly. I installed a second monitor without problem. After testing the monitors were operating properly, I shut down the PC to remove the old monitor and when I remved the second monitor and powered on the system. It allowed to to start the system and got stuck on a web page (to detect the Proxy settings) I let it sit for about 30 minutes and forced to withdraw.

  When I rebooted nothing worked. I tried refreshing the PC and rebuild MBR etc... Nothing has worked. MS suggested the clean install. The installation restarts would freeze and I had to manually stop to complete installation.

  The short of it is... Can not stop or put to sleep. What stops the system will power down, but Fans and light PCs remain on. I have to always force shut off. MS works with me, but no luck so far. All drivers have been updated. Several upgrades and reinstalls.

  Why everything worked properly when win7 has been upgraded, but not when win8 was clean installed?

  BIOS FRIEND 7.07, 16/08/2011 8 GB Ram 1 TB HARD drive

  After further investigation, I learned that some drivers Win8 and HP are not compatible. Once update drivers out of HP, then the new facility should be good.

  I rebooted Win7 and then Win8 and everything is great!

• Charges Post Huff in Firefox but will not load stop and cannot be read. Not the same with IE

  Huffington Post is the site that is unable to stop loading. (there may be others, but I don't know them)
  I tried everything that was suggested and without success. I read every day Post Huff and must use Internet Explorer to be able to read and click and scroll...

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Windows stops and restarts each time I login, the last thing I did was partition the hard drive

  I upgraded my hard drive because I needed more space.  At first, I put the same settings as the original drive.  C is the primary drive and D is the HP recovery disk.  There is apparently a small partition that windows uses, but does not have a drive letter.  I left all sizes even.  This has left me a large part of the unallocated disk.

  With the help of Partition Master, I created a major score that I use for music, photos, documents, etc.  At the time I did, I got an external hard drive connected.  He was assigned as drive F and I created the new partition as G:.

  Shortly after this, my computer crashed and restarted.  When I log in, it says that windows has recovered from a serious error.  It plugs along for a little while and then did the same thing again and again and again.

  It doesn't gives me a lot of other information that means something to me.  If I click on the Details button for the information it sends to Microsoft if I want to report that it has a bunch of gibberish, but I'm sure that it wants to say something to someone.  I'll try to copy the next time it hangs after as I write this.

  I ejected the disk external and changed the drive letter on my new partition to F.  I can't believe that's going to do something, but I thought that maybe the partitions on the drive must be in order (of course, I'll try anything).

  Any help would be appreciated.  Thank you.

  Hello

  You can follow this link & check if the problem persists.

  A "System has recovered from a serious error" message after every restart.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• each time a test download creative cloud it stops and says a problem caused blocking the program works properly, I did find and can't make it work!

  He continues to get to halfway through, that I'm tired of this. I've removed the CC and you can always not re install.

  Kindly share the OS version you are using, here are the steps you can try:

  Remove the remains of Adobe Application Manager & Creative Cloud app-

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.

• Hi, I bought 6 Iphon from another country and it does not work in the USA help please!

  Hi recently I went to South Korea and I bought the iphone 6 in there and used it

  And I'm back to try from the USA at the same use iphone 6, but it does not work with my verizon sim card

  So I went to the verzion store to find the problem but they could also solved the problem

  Can you help me please?

  N ° do not use this phone on Verizon. Verizon is a CDMA carrier. It can be possible to operate on the Verizon LTE network, but they don't will not activate it on their CDMA network. Only unlocked iPhones they will activate on their network (excluding those sold specifically for Verizon) are the 6s and 6 s more.

• My Contacts from Windows Vista file has no control of import or export on the toolbar, and then I can not follow the Guide help to initiate the sequence of import. Does anyone know how to add the import function in the toolbar.

  Ideas:

  • Problems with the Contacts on Vista
  • No error message
  • Never used this feature before
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  The Contacts folder is sometimes forgotten how to display contacts, see if this helps:

  1. open Windows Contacts
  2. right-click anywhere in the right pane.
  3. Select "Properties" at the bottom of the list
  4. click on the tab 'Customize' on the 'Properties' page that opens.
  5. change the 'Type', 'Contacts' folder

  New Contact"and"Contact Group on new"button missing 
  
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Videos work intermittently; Stop and start

  Videos do not work all the time. They stop and start every few seconds. The same videos play fine on Internet Explorer.

  Reload the Web page while bypassing the cache

  • Hold down the SHIFT key and click the reload with a left click button.
  • Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
  • Press command + SHIFT + R (Mac)

  Clear the cache and cookies from sites that cause problems.

  Clear the Cache: Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  Remove the Cookies from sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• keyboard and mouse periodic; LY stop and start the rear closing down

  I have a Compaq Presario 5710 desktop PC. Recently the keyboard and mouse just stopped working. I stopped and restarted and it worked OK fo a few weeks and it's the same thing.  By clicking on a button or mouse had no reaction whatsover until I have stop and restarted. These aren't the USB devices.

  I checked that all the drivers are up to date and Windows 7 is up to date.

  Can someone point me in the right direction to solve this problem?

  Thanks for the information,

  I have a few links that may be useful for you. Here is a link to information on the reduction of heat inside the computer. Heat is one of the main causes of the computer freezing and becoming unresponsive.

  Here is a link with some troubleshooting for lock upward and performance problems. I also recommend doing a clean boot on the computer. You will thus limit the start up programs that might cause a problem. Here is a link with instructions on how to do a clean boot.