BSOD after replacing hard drive

Similar Questions

• Satellite U940 - Random BSOD after replacing HARD drive

  Good day ladies and gentlemen!

  I was wondering if I can win some lights here - as I google myself in a bunch of flange on the issue, I have!

  I am a famous computer technician (modest too) and more recently, a client of mine introduced me to a ultrabook Satellite U940 - lovingly with the SSD / HDD Raid 0 configuration running our beloved Windows 8.

  All things according to their entire course - Hitachi hard drive failed (as google tells me is to be expected).

  So, I replace the hard drive by a great little number Western Digital, cloned from Hitachi, sector by sector, and after a significant cajoling with bcdedit and bootrec amount, I could so he could begin our good liked Windows 8.

  However, since then, I have random BSOD, cold boots failed and all sorts of errors.

  I ran all the regular patches - SFC/scannow, chkdsk/r, Windows 8 repair facilities, etc., but it is still volatile jolly.

  Things seem not to be as they were with this Satellite little ol '-before any repair, the peripheral device manager showed two "RAID 0' in the category of hard drives, and since then it shows the individual SSD and the WD HARD drive."

  I've updated the driver for the Intel Rapid Storage at latest on the Toshiba site, but nothing helps - alas!
  The weird part is that if I do a reboot on this little beauty, she starts without any problems, but a start cold after a power off is a completely different question - dummy - spit crashing, dumping, in general!

  If there is a troubleshooting there champion who can destroy my help in this situation, I'd be very impressed and never have if they could provide assistance in this regard.

  Unfortunately Microsoft - are we are all end by using these products of ever-so-pretty Appl?

  Hello

  I read in some discussions here in this forum only after replacing the disk SSD or HARD drive, the RAID configuration is lost and must be rebuilt on a device Windows 8.

  But this can be done very easily, and this can be corrected by an authorized Toshiba because this procedure requires special tools and utilities.

  Unfortunately, it seems to me that you will need to contact the ASP in your country to get this problem resolved :(

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• eMac stops almost immediately when starting after replacing HARD drive

  Hey all!

  I need to explain a bit for this one, so please bear with me. Thank you.

  Long story short, I've had a few eMacs for quite a while now and I recently found a use for them. I created a (it is running 10.4 with 1 GB of RAM and a > G4 processor at 1 GHz, can't remember) and used it for a while before randomly power loss and refused to stay on for more than a few minutes. I tried to replace the PMU battery with one of the other Mac and pressing the reset button, which leads to stop showing signs of life whatsoever (even after the replacement of the original battery).

  Thinking I had it bricked, I got out one of the other Mac with a plan to give the disk of death. This new Mac running 10.5, perfect with another > G4 processor at 1 GHz (but only 768 MB of RAM this time). The only quirk I noticed is the TRC took abnormally long to warm up, black time with only red but gradually more luminous and no longer red colors of departure. It was about normal 5 minutes after that OSX end of initialization. In any case, I went to swap out hard drives and put everything to the top, to see that yet again, this new Mac does not work!

  If it has been awhile since the last attempt to start the CRT will do its usual "bong" noise before machine clicks (sorta like a relay of power off) and nothing else happens. If I try again, the CRT is silent (no doubt he is already warm from the last attempt to start?) and you can hear two clicks - one that looks like something to turn it on, then turn it off even on front. These clicks are different lengths apart - usually, this is only a few seconds, but sometimes longer. There was a few times where the fans have started between clicks and I've even heard the startup chime on an attempt (which got me excited - but no, it clicked and distributed repressed). The CRT does not seem to do anything other than bonging from time to time (but it can turn on - I can't say because of the problem of the warm-up that I mentioned earlier).

  I would really like to be able to resurrect this old Mac once again - I have the vague feeling that I broke it when replacing the HARD drive. I'm pretty sure that I have not forgotten all the internal cables, and I tried not to touch anything other than the HARD drive and the enclosure of the logic board (ended up having to remove the blower housing too, however). Two Macs are model A1002 and both have serial numbers in the YM412xxxxxx - YM520xxxxxx range (eligible for repair program?). I don't know if they were actually taken repair back in the day.

  In any case, I hope you guys can help out me! Thanks in advance!

  (P.S the first eMac is well beyond repair. I have also a third one - it is better to go by replacing the HARD drive again? It is worth noting that the PMU battery has been sitting on my desk for a while now. "It was probably flat anyway).

  The HARD drive would be the problem? It seems that it is.

  See if you can just unplug the data cable from HARD drive and try to hold down the alt or option to the startup/power.

• Satellite L300 - cannot install Microsoft updates after replacing HARD drive

  I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

  Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
  Then I borrowed a 160 GB of work and went through the same process and everything works fine.

  To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

  > ... Standalone Vista SP2 I downloaded will not be installed
  Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

  Let the system to install all the updates and don t force the installation of some own downloaded stuff.
  Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• No sound on my Satellite after replacing HARD drive.

  I recently got a new hard drive on my PC, but there is now no sound system in the computer.
  I guess I need to install drivers? What drivers do I need and how to install? Thank you.

  Hello

  You really think that someone will be able to post a useful answer without knowing details of your laptop model and the installed windows operating system?

  I can tell you a standard procedure.
  After having changed and replaced the HARD drive, take the Toshiba Recovery disc and install the system using this disc.
  All the drivers and tools are preinstalled on this OS, and by using the recovery disk, you should get the sound on your laptop.

  Good bye

• Recovery disk failure after replacing hard drive of a laptop computer DV7 series

  I have a HP Pavilion dv7-4270us with Windows 7 64 bit and recently received a message on start-up indicating that the intelligent of my hard drive failed. I bought a hybrid Momentus XT drive. I bought the recovery discs, since I neglected to follow my own advice and did not have a game. Replaced the hard drive, and begun the process of recovery, after the disc of the Application, the system was declared finished, clicks the button, the system shuts down. Activated power, recovery took over for a few minutes, declaring that he was copying files, a few minutes later, he said it was over asking me to click done. After that I did it, the system has rebooted hung on the screen of the HP logo with the statement in the lower left corner indicating "press ESC for the Start Menu. My only recourse was to power down the machine. When I restart the computer, I get the message 'Bootmgr' missing

  I have already paid through the forums and tried to download the Windows 7 Home Premium 64 bit DVD of digital life. As it starts installing, it indicates that a driver is missing, I poured by drivers for this computer and see nothing for SATA, and none of the others would be required to start. I succeeded in my Windows 7 Professional on the loading system, but since I don't have an extra code to hang out professional, it's not helping right now.

  I also tried to partition the new disk manually using a device that allows me to see the drive using a USB port and my office, but he's not right. The good news is that the old drive still works to a point. I can read it via USB, and I can back up the drive, with the exception of the recovery partition. But when I put the new disk and set up similar scores for the original drive, it still does not start.

  I have tried many other things all pronounce the failure, I'm not used to failure when it comes to computers, so be gentle.

  Hello:

  The missing pilot is due either to a bad burn or use another brand of DVD. You must burn the ISO at the slowest speed possible file that you can.

  In addition, check the size of the ISO file that you downloaded. Sometimes you do not get the full 3. XX GB even if the download says completed.

  If you have 4 GB or more large USB flash drive, you can install W7 as it.

  Just follow these instructions...

  Download the MS of W7 USB installation tool and read the instructions on the page to use.

  http://www.microsoftstore.com/store/msstore/HTML/p bPage.Help_Win7_usbdvd_dwnTool

  You may also make this mod as I did if the flash tool-error.

  Download the bootsect file form http://www.everettsporting.com/bootsect.zip

  You will need to go into Control Panel, select display large icons, go to the icon of folder options, view tab, and select the hidden files and folders option.

  Once downloaded, copy the BootSect.exe file in the same folder that contains the file of Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows 7's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\
  
  Run the application from the Windows 7 USB/DVD download tool as described on the Microsoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Paul

• Recovery disk works does not after replacing hard drive Pavilion dv7

  Hello. I have problems of replacement of a failed hard drive in my HP Pavilion dv7-6154nr notebook running Windows 7. New HARD drive seems to install OK, but I get a Windows Boot Manager error when I try to run the recovery disks created when the system was purchased. The message says "the boot selection failed because a required device is not accessible" "status: Oxc000000f. I changed the boot order in the BIOS to boot from the internal DVD player but continue to make the same mistake

  More info: I upgraded the HARD drive from a Toshiba MK6476GSX - 640 GB - 5400 RPM for a WD Black 7500BPKTSP.  I don't see any info in the new HARD drive in system information / BIOS so I don't know if it is recognized. However, it take and pass a diagnostic test.

  Thank you.

  You are the very welcome.

  Now you get the drivers from the support page and driver for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&lang=en&LC=en&Product=5151752&Task= &

  If you have a problem to find drivers (such as the wireless, unless you already knew what the wireless adapter model you have in the PC, you will not know which driver to install).

  Just after the hardware ID's for all you can't find the drivers.  Who need device drivers appears in the Manager for devices with a little yellow. brand and labelled with material generic terms such as a network Contoller or PCI device, etc.

  If you don't know how to find the hardware ID, please read the info on the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device