BSOD and Realtek AC97 Driver

Similar Questions

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Qosmio X 770-BSODS and Crash Dump driver failed to load

  Hello

  I have a Qosmio X 770 and his blue screening occasioanly but I can't find out why as the crash dump driver fails to load at startup.

  I gave google and tried to recreate the page, Delete file, it restart, rebuild again, affecting also devote dumpfile in the registry and still at every start I receive event ID 45

  The system could not sucessfully load the crash dump driver.

  I ran SFC and all files are very well

  Windows 7 64 bit, core operating system

  someone at - it ideas?

  Thank you

  Found a user who had the same problem with the dump file, and this could be solved by deleting the swap file, and then restore and after that seems to have solved the problem...

• BSOD and vwifimp.sys driver

  As he tried to watch the video (a mobile phone accessory) the screen went black and then blue screen of death. I made a Safe Mode boot and verified that all drivers are up-to-date. I disabled the Virtual Wifi Miniport Adapter at this time. After that several reboot failures I made a Safe Mode with logging enabled. This saves the driver loading process and ends the last driver loaded before the failure.  This driver is \system32\DRIVERS\vwifimp.sys. The computer is a stable if not Windows 7 64 bit with 8 GB. Appreciate your thoughts.

  Bud

  This phenomenon was related to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc.  Yours is 5 years and more.  I remove the current driver and install the latest driver available.

• Tecra S11 - nVidia or RealTek audio driver. That you install?

  Tecra S11 nVidia vs RealTek sound driver - which one should I install?

  I installed nVidia and realtek audio driver also. I've got BSOD when I plug headphones 3.5 mm jack. When I want to listen to music with my Bluetooth stereo headset also got BSOD.

  I reinstalled the drivers for card its nvidia and realtek. My Tecra S11 is very slow since I installed the latest video driver from nvidia site nvidia.

  Windows 7 very very slow since then. Start time of Firefox until sometimes 20-30 sec

  Can you please post the exact model name and model number?
  You can find it on Toshiba sticker placed on the bottom of your laptop.

• DriverMax update drivers. Among the updates was for audio and subsequently did not sound. Soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  original title: no sound

  I used drivermax (for the first time) to update the drivers. Among the updates was for audio and subsequently did not sound. I tried to restore to a date backup earlier, but without success. My soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  Bad move!

  PC manufacturers sometimes 'tie' in the drivers for their machines so that the only reliable method to update either directly through their Web sites. DriverMax will detect your audio device and go to Realtek to obtain the driver. Not the solution, unfortunately

  MS Update also not as he says, is up to date...

  Go to the website of the manufacturer of the PC/laptop and find the support page for your machine. Download the audio drivers from here and install it.

  If it is a machine that you have built yourself, go to the website of the manufacturer of the motherboard and do the same thing from there.

  See you soon,.
  Jerry

• Ill be doing his work on 2nd hand PC. Realtek AC97 Audio Driver necessary?

  Ill be doing his work on 2nd hand PC. The audio controller multimedia mfg is listed as unknown. It didn't work not initially, but through troubleshooting, the properties of the device says now that it works correctly. Now missing the Realtek AC97 Audio driver. I tried several downloads, and but can't seem to get the driver installed. The pc did not come with any driver or installation CD when a dialog box opens, but that's all, I get a low "beep" of the PC. No access control of volume or other sounds.

  Please try to install the driver:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=14&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false MOEEN AJAZ KHAN MD - MCP/N + / A +.

• Re: A500 - 1 H 6 * BSOD and Nvidia driver problems

  Hello

  A few months ago I bought a Satellite A500 - 1:6 and I am almost happy with it. In fact, I have 2 problems:

  1 - from time to time, the screen goes black for a few seconds and comes back to life after showing + a message on the Nvidia driver which has failed, but was back +. I tried to update the Nvidia driver, but it was even worse.

  2. when I use wi - fi, most likely my laptop eventually freezing for a few minutes, then followed by a BSOD.

  I don't know if it's relevant, but I had to update the BIOS when I bought because there was another problem (the laptop awake by itself, early in the morning).

  If anyone has an idea that I can solve these problems, that would be greatly appreciated. Thank you.

  Mike.

  Hello

  > I tried to update the Nvidia driver, but it was even worse.

  Are you talking about the toshiba page vga driver? I have fixed BSOD for a500, update driver vga nvidia.com, about 6 months ago and since away once no BSOD more.

  > 2 - when I use wi - fi, most likely my laptop will end up freezing for a few minutes, then followed by a BSOD.

  try to update.

  > I don't know if it's relevant, but I had to update the BIOS when I bought because there was another problem (the laptop awake by itself, early in the morning).

  something like this is described here:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=76

• Portege R500 - low volume with Win 7 and Realtek driver

  Hello

  I have now installed Windows 7 on my R500 to prepare for the end of Windows XP to life.
  I've experienced this now with Windows 7 sound does not really work.

  Build-in speaker does not work and a speaker connected to the outside with amplifier can get just a little sound in the maximum amplification I googled and saw many people having similar problems.

  Does anyone know if Toshiba has a solution for this?

  Other people with laptop computers Portege have the same problem?

  Thank you
  Markus

  AFAIK the Portege R500 supports Realtek ALC262
  I googled and found some people having problems with low sound volume on other laptops from other manufacturers using the piece ALC262

  But I found the solutions :)
  Download the utility of small noise turn Mute Off after upgrade to Vista
  [Its utility to turn Mute Off | http://support.toshiba.com/support/viewContentDetail?contentId=1671893&pf=true] and unzip it with WinRAR or WinZip
  You will find a small file called "MuteOff". Run this file as an administrator and check if your sound would work.

  Note: All drivers should be installed as well as the Realtek audio driver.

  Your comments would be appreciated

• Realtek LAN and synaptics touchpad driver for hp pavilion g6-2237us

  Hi guys

  I tried to install the apps, but I can't. hp support assistant warned me that significant action was required and the opening to check on the action, I discovered that the synaptics touchpad and the network local realtek failed to install. they were on the sections of the failing elements and I their redownloaded then through even hp support assistant. the process went well and then stopped on the installation section. both applications are now displayed in the actions of conpleted and didn't stock boxes. How can I successfully install these programs? Help, please.

  Thank you

  have a guy great day.

  @BALDAGEI,

  Thanks for posting.

  It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...

  Also, you can try to install the touchpad and the Realtek driver yourself:

  -To install tuchpad driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118377-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=

  -To install the Realtek LAN driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110514-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After changing the German OEM for Windows XP Pro SP2 do not work my Realtek AC97

  Hello everyone,

  After I changed the OS on my Satellite m40x.

  My sound card does not work.
  I have downloaded the driver of sound-sm40x-xp - 510005740t .zip. It detects unknown multimedia Audio Realtek AC97 Audio device, but it is marked with a! and he said:
  Windows successfully loaded the device of this hardware, but driver cannot find the hardware device. (Code 41)

  I'm sure that the device is working because when I try to disable it in Device Manager, I hear a beep warning me that I have her will deactivate.

  Thanks to all in advance

  Recovery to the German bone is not an option :D

  Hello Val

  Please check this document http://support.toshiba-tro.de/tools/Satellite/sm40x/win-xp/install-sm40x-xp-na.zip

  Please install your unit following this statement of facilities. It is very important that all the software components are installed in this order.

  You can also try to remove the block from the Device Manager, and then restart the device.

• Realtek 8185 Driver Windows Update installation causes system crash

  Install the Realtek 8185 Extensible 802. 11b / g wireless listed device driver as optional in windows update in windows 7 ultimate 64 bit results BSOD and system becomes unable to boot (System Restore will fix it).

  I am writing this to see if it is a special situation with my system or if it's a widespread problem, the following driver Details.

  Camera works great with the default driver, so if someone is going to tell me do not install this driver and look for another who is not the issue. Problem is that this driver in Windows update will cause the crash (BSOD) and system does not start until the restoration of the system is used.

  System Specs:
  OS: Windows 7 RTM x 64 Ultimate (new installation)
  P: AMD X 3 720
  M: 4 GB DDR3
  VC: GTX 260
  MB: Gygabyte MA790XT-UD4P
  (Related to the problem) wireless adapter: Realtek 8185 Extensible 802. 11b / g Wireless Device

  Driver details:
  Realtek Semiconductor Corp. - network - Realtek 8185 Extensible 802. 11b / g Wireless Device

  Download size: 409 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Software update of Realtek Semiconductor Corp. network released in September 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20298246

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  Hello

  You must go to Realtek and get the current driver, it works fine on my system. Do not do it just
  means that you're stuck in the loop, you're in and the pilot trying to update Windows Installer is a
  an old man just certified for Windows (MS is far behind the pilot certification and accreditation is not
  means that they work properly).

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• REALTEK AC97

  I accidentally deleted my Realtek AC97 audio device and would like some advice on how to reinstall a new onw, can someone help me?

  Concerning

  Dennis

  I guess you deleted the 'pilot' and 'peripheral '?

  The first place where you should look for drivers is the website of the manufacturer of your computer.  Go to their homepage and see the 'Support' section, then "downloads".  If you cannot get the driver from your computer manufacturer's website, try the link below:

  <>http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=23&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false >

  HTH,

  JW

• Some rather illusory BSOD and crashes on windows 7.

  So for the past month I have been doing some strange crashes and BSOD that have been in every sense. I've been on Reddit and impossible to get a solution, I have reformatted, which does not set it. I've been on with the technical support of Microsoft support chat and can not get a definitive answer (they spend hours and a symptom of trouble then send me on my way). Accidents and the BSOD happen a crapton all in one day, it's good for several days, then it's a crapton while a new day. I just assumed it was graphics so I uninstalled and reinstalled. No solution. I assumed it was ram, so I change RAM, using just a single chip, get chips on other computers, including the chip switch is in what location, perform a test of memory, no solution.

  Apart from just BSOD I have therefore also get those pips weird screen that blur the screen and resemble a classic movie scene where a security monitor is hacked. Or sometimes I can be working away and suddenly the computer starts up without ever giving any warning or anything.

  Here are the BSOD logs that I have. He did TONS more than that, but more often it does not really give me a journal later.

  Crash Dump Analysis

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Thursday, October 6, 2016 10:33:43 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: unknown (0xFFFFF80002D38344)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002D38344, 0xFFFFF880067AAD40, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: SYSTEM_SERVICE_EXCEPTION

  Thursday, October 6, 2016 20:18:22 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100616-25740-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 70150)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 3, 2016 17:22:27 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100316-48391-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800490080C, 0xFFFFFA8007F784E0, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Saturday, September 24, 2016 9:53:06 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092416-62416-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800453A80C, 0xFFFFFA800D828010, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Thursday, September 22, 2016 6:59:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092216-29250-01.dmp
  This was probably caused by the following module: tcpip.sys (tcpip + 0x52A73)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  path to the file: C:\Windows\system32\drivers\tcpip.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver TCP/IP
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, September 20, 2016 17:47:17 this computer crashed
  crash dump file: C:\Windows\Minidump\092016-62213-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x5A88)
  Verification of error code: 0 x 24 (0xFFFFF8800A5E5A48, 0xFFFFF8800A5E52A0, 0x1904FB, 0xFFFFF880012A94E4)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Monday, September 19, 2016 5:38:40 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091916-39905-01.dmp
  This was probably caused by the following module: unknown (0xFFFFF880013E86E4)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: KMODE_EXCEPTION_NOT_HANDLED

  Hello

  Although there may be other factors at play that video drivers ATI are involved as well
  Check with Support ATI, their drivers and documentation online and ask for their
  Forums about known problems.

  AMD/ATI - assistance and pilot - search
  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.2&product=2.4.2.3.9&ContentType=GPU+download+detail&OSType=Windows+8+Preview+-+32-bit+Edition&keywords=&items=20

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  However, given that you re-installed Windows there must be a hardware or BIOS.
  driver Chipset or other very low level driver problem. So anything you can update and
  use the other methods below.

  ==================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section because if you
  may or may not start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Vista and Windows 7 updated drivers love then here's how update largest. References to the Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - see
  Hide Microsoft drivers - updated those without drain in their names. (Also update BIOS and drivers from the chipset.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ================================================

  After doing ALL the updates you canand if the problem persists, run
  DriverVerifier.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7. (8/8.1 and 10)
  are essentially the same).
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff545448%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message.
  Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump download and post the link here so that we can
  analyze it.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">