Re: A500 - 1 H 6 * BSOD and Nvidia driver problems

Similar Questions

• Satellite A500-19 x: no lighting and modem driver for Win 7 required

  My laptop died so I tried to re - install windows 7 and all the drivers for it.
  I could not install the modem driver (?) and therefore can not access internet from him.

  In addition, the buttons above the keyboard light is no longer lit.
  The taskbar are a nasty gray instead of translucent.

  I don't know much about computers and would appreciate any advice :)

  Hello

  The light for the buttons is called Illumination.
  You can enable or disable in the BIOS settings.
  Turn on the computer and press F2. Here, you will find the option of enlightenment.
  Enabled, save the changes and restart the device

  The A500-19 x belongs to the series of Satellite A500 PSAR3E.
  I checked the European driver of Toshiba page and there is a 2.2.97 for Win 7 64 bit modem driver

• MBL, CS5 and nvidia driver

  I'm having a problem with the MBL (version CS5).  I get a message "Not responding" when I opened the EDIT of the plugin section.  The screen goes black then white then the message.

  I have contaced red giant and they say:

  Update for case # 16565

  
  

  Hello Craig,.

  
  

  We currently have a problem of compatibility with the latest driver from Nvidia. Can you try to go back to an older version of the Nvidia driver and let me know if this solve your problem?

  
  

  Thank you
  -Nate

  Would you do that in a system that works perfectly otherwise?  (WIn 7, Quadro FX3800 etc...)

  Can someone let me know which version of the NVIDIA driver they use it please.  How will I know what is common and what to restore?

  GDR - I sent you a PM, because I know that it works for you as tested yesterday.

  "

  Nvidia drivers automatically update? »

  No, they do not. If 266.35 is always available, go with it. MBL has worked with her, and you can still use the HD Audio driver for HDMI output just in case.

  Use the 266.45 without the audio driver as a last resort.

  It's getting late, I have to close during the night.

  Good luck

• Satellite P300-1FY - BSOD right video driver problem

  Hello

  I bought this laptop a month ago to replace my old who crashed without possibility of repair and I had problems with the video drivers since then. I hoped that the problem would resolve since I am in the middle of my exams and I really have time too much more time to spend to fix it myself, and I also can not him go to the store because I need some software for my exams.

  So the problem that in my view, lies in the video drivers for the graphics card ATI Mobility Radeon HD 3470. While I'm working on my laptop my screen all of a sudden turns black and my computer crashes (including the very unpleasant noise when I play music at the time) after 5 seconds it flashes live and displays a message indicating that a beelschermstuurprogramma niet Super perfect en is naked herstela. In English, it would be something like s video drivers did not work properly and have now been repaired.

  It is of course extremely irritating, but it became even more then a few weeks previously when I had a blue screen because of a similar error. What make me lose half an hour of work on my laptop. (and as someone who has had reviews knows, half an hour is not something you can always afford to lose) I ran the wizard, and he sent me to the ATI site to look for the drivers.
  The downside is that I could find many drivers, but none for the 3400 series. After an internet search for awhile I finally found some drivers for these series (or they pretend to be), however, this installer was corrupted. I also searched the Toshiba site, but I did find what I was looking for.

  The laptop also freezes from time to time without the screen turning black.

  Could someone help me with this problem?

  Louis-Philippe

  P.S.: quality of the keyboard is really bad also

  First of all, you should post the exact code of BSOD and what operating system you are using. Then, we can search for this problem and what is the reason for this on the Microsoft Knowledge Base.
  Then please send the BSOD code.

  In addition, I put t understand why you can t find a driver on the Toshiba site. Satellite P300-1FY belongs to the PSPCCE series and so I can find a display driver for XP and Vista. So where is the problem? Maybe you should try to install this driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before you install the driver, remove the old driver first. Reboot the laptop and clean your system with CCleaner. Restart the computer and then install the latest version on the Toshiba site.

  The display driver on the factory site Internet (ATI) doesn't work because it s only for cards of office and not for laptops. Then, you can t install and your laptop has only been tested with drivers of Toshiba.

  If the new driver doesn't work, you should try to update the BIOS too. You will find on the page of Toshiba.

  Good luck!!

• Presario Notebook PC NV243UA #ABA CQ60419WM does not connect to the internet. Nvidia Driver problem.

  Initially, got a Nvidia 10 code.  Downloaded and installed another NVIDIA driver from a flash drive.  Restore the computer to earier time and currently says Nvidia Driver Helper Service Version 186.44.  Connection to the router is good but the computer does not see the connection.  What can I install to correct driver?  Thank you.  John

  Hello:

  I don't know why the graphics driver is not installed, but you need this driver to connect wirelessly to the internet.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

• Satellite L30-134 - LAN and audio driver problem

  I installed the LAN driver but my internet is not working and I have problem whit my sound. I can't make it work in the speakers.

  Hi Smike_de,

  I think that no one can offer a solution to your problems because information and a more detailed description of the error are missing.

  What operating system you are using?
  Are you running the factory settings?
  Have you tried reinstalling the drivers?

  You can try to update the drivers. You can download it on the Toshiba site.

• After the upgrade to Windows 7, Windows 8, audio lost, receives errors chipset, bluetooth, and PnP driver problem

  Original title: Intel (R) B43 Express Chipset

  Since I updated to windows 7 to windows 8 pro, I lost all audio on my laptop. I tried to update the driver audio, but all without success. I get these errors:

  (1) "Intel (R) B43 Express Chipset (Microsoft Corporation-WDDM 1.1) has a driver problem"

  (2) "stereo Bluetooth has a driver problem"

  (3) "problem with PnP devices"

  (4) ' Windows Update configured to never install drivers", even though I checked the windows update to"Automatic update".

  I have a laptop Hp G60 - 533CL. I would greatly appreciate help or the market to follow to solve these problems.

  Hello

  Thanks for posting your query on the Microsoft Communities.

  I wish to inform you that HP has not released Windows 8 compatible drivers for model G60 - 533 CL.

  The reason why you are facing this problem may result from a lack of drivers for your hardware.

  I suggest you try to install all the drivers for your hardware in compatibility mode and check. You will first need to download all the device drivers on the HP site for model G60 - 533 CL and then install them in compatibility mode.

  Visit the HP website for model G60 - 533 CL to download device drivers: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4041422#N1993

  See the following link on how to install the drivers in compatibility mode:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please answer us on the State of the question to help you further.

• Several BSOD and display driver has stopped/recovered

  This is a new generation of about two months ago. First record:

  -Biostar Mobo TZ77B
  -In the course of running a Geforce 560 with 301,42 drivers
  -16 GB Corsair XMS3 1600 DDR RAM (two sets of 2x4g, second series was RMA had and has recently received, problems started after the installation of the new together)
  -550w Rosewill PSU hive

  Initially got a set of bad RAM, RAM had. During the removal of the bad RAM my 560 died suddenly and was RMA would be as well. Replacement 9800GTX + has been installed as I waited for the 560 to be returned, which unfortunately did not solve the problem. As soon as receives a new set of RAM from Corsair and installation I started getting errors display driver stopped and recovered while gaming, artifacts and an occasional BSOD with various codes (I saw 0000003B pop up the most.) while playing City of Heroes of MMO, surfing the Web and watching videos and all playing various other games. The BSOD seems to also occur in pairs, usually one plant to me during a game, and then another a few minutes after the restart.

  I run stress tests using Prime 95 my last system, as well as of Furmark and makes both temperature resistance tests, while controlling also my GPU under load. So far the CPU and GPU temperatures exceed not anywhere in what seems to be a dangerous area. I also ran a memtest86 overnight on the RAM bars for 9 hours, 18 assists, without error. Unfortunately, only, I could get memtest 3.5 version to work, the 4.0 would immediately restart (not sure what the cause of this what)

  Yes small lots is the way the safest are the Windows updates. I start with sp1
  first to avoid installing updates can be in sp1.

  It is the misfortune of having to RMA a card more than once. My Gigabyte GTX560ti was spotless and quiet on the first day (a little over a year now).
  At least, you run stable now and know that the other stuff is good.

• Windows 7 blank screen with cursor Hang (Nvidia driver problems)

  So, I tried to understand this for 2 days now and can't find a definitive solution. I'm running Windows 7 64 bit and my graphics card is a nvidia 9800 Gtx +. Whenever I try to update display drivers (I tried all the nvidia versions on their site for windows 7 64 bit drivers), during the restart I get the Windows Logo and then where he should go to the login screen, just blank with a slider that is mobile and never changes. I write of the same model, but I have just the driver value Standard VGA (Did it safemode). Any ideas?
  EDIT: I thought I might add, when I initially installed I had to use a friends video card to do finish, it would hang at the end of the installation. I swapped my card after the installation.

  I tried the drivers from EVGA, which is my card manufacturer. Not good. And on Windows 7 the default driver has not yet so why I had to standard VGA. I solved the problem by opting for an ATI Radeon HD 4870 instead, works perfectly. But it still bothers me that the drivers for the Nvidia card will not work with 64 bit vista or 7.

• Catalyst control center and ati driver problem

  I installed Nvidia Geoforce GT630 in my Inspiron 570... Windows 7... 8 GB ram

  Processor a Main Circuit Board b3.00 gigahertz AMD Athlon II X2 250256 kilobyte primary memory cache2048 kilobyte secondary memory cache64-bit readyMulti-core (2 total)Not hyper-threadedBoard: Dell Inc. 04GJJT A00Serial Number: ..Bus Clock: 200 megahertzBIOS: Dell Inc. A05 12/20/2010
  

  A window pops up with ATI Warning and the following message:
  

  "Catalyst control center is not supported by the driver version of your enabled graphics adapter.
  

  Please update your ATI graphics driver, or enable your ATI adapter using the Displays Manager"
  

  ----
  

  I can't find the ATI adapter in the Displays Manager. I seraced for a new ati driver but didn't find anything for my puter.
  

  Also, in the PNY instructions it had the following....which I could not find:
  

  If you purchased a PHNY GeForce PCI grapics card and if you have on-board graphics,
  

  enter the system's BIOS setup and look for a setting called "Primary Display Adapter" or something
  

  similar. Set this to "PCI". If you cannot locate this setting, please contact you system manufacturer blah blah blah.
  

  Anyway, there was no such setting in my BIOS.
  

  Anyone have an idea how to fix or get rid of the catalyst control center?
  

  Thanks
  

  Hi scottparat,

  Yes, please go ahead and uninstall the full program from the computer and restart the computer.

  Also in the device under the Graphics Manager that you need (either Ati or nVidia Geforce GT630).

  Please write back to us.

• Satellite P200 mainboard and HARD drive problem

  Hiya,

  I had my Satallite Pro for only 3 years.
  During the past year I had problems with the HARD drive and at one point broke and I had it replaced, it worked for about 2 months and who broke. I got another HARD drive, and now it has broken.

  I took it to a repair shop independent who say it could be a problem with the motherboard or the Starter connections, or perhaps love to him. ???

  I rang toshiba and I didn't have only a years warranty, so my main questions are:

  (1) how much approximately will it take to get fixed

  (2) is it useful

  (3) is it successful.

  I'm not sure to get if fixed at 100% I know I can't afford a new to the same specification as that time.

  Any help or advice will be approciated.

  FINA

  Hi mate

  To be honest, a motherboard is a laptop computer cheap party.
  If it of really a motherboard problem and if you have to replace the motherboard to solve this problem, then you must know that this could really be a costly affair

  I'm not quite sure how a new motherboard might be, but I think that you will have spent about 300-350 Euros
  That s a lot of money so it s your own decision of what's best for you. buy a new laptop or pay for a fix.

  If I was you I'll sell this laptop and would like to buy a new unit.

• Satellite A200 - 1 H 2 - Virus and its driver problem

  Three weeks I bought new laptop Satellite A200 - 1 H 2.

  I have Windows vista with my new laptop computer.

  1. When do voice chat online (yahoo chat or just VOIP), receiver is not able to hear my voice but can't seem to listen to his voice clearly.
  My versions of sound cards are:
  Audio version of Realtek High definition: 6.0.1.5433
  High definition Audio Device, version: 6.0.6000.16386

  I checked the audio drivers, my speakers and the sound settings. everything is fine. Even if the problem still exist.

  2. I installed Norton Anti virus on my machine that came with the new laptop, even if a virus settles in my machine, his hitting messge automatically between my messages.
  But every time I run anti virus, get a message like a cookie should be resolved, even after setting this cookie also in the next virus scan am same cookie again.

  I deleted the cookie of IE-> tools-> options. But it has not solved the problem.

  You could any body help me on these problems?

  Hello

  Autour Googling, I found many comments on the problems of sound using Yahoo Vista. Have you checked what others write about it? Yahoo is not my favorite Messenger but I would like to know if you are using the version for Vista?

  Unfortunately, I can't say anything about Norton. I tested this version of 90 days on my P200, but after a few days I have removed from the system. It is not my favorite for the protection of the system program.

• HP laptop laptop 15-ac047ne: computer hp laptop. upgrade to windows 10 and graphic driver problems

  Hello.

  I have a newly purchased HP 15-ac047ne laptop. Whenever I have let windows automatically updated, update the full operating system for windows 10, I keep losing the Catalyst Control Center as well as the AMD graphics driver (which I noticed because the adapter is gone from Device Manager.) So I ended up back to factory default with windows 8.1 and kept all the automatic updates turned off. In addition, update drivers on this unit is very annoying... so I went here because I'm tired to reset the laptop to factory settings, whenever things get screwed

  Issues;

  1. is there a simple and effective way to get the latest drivers for my graphics card? (AMD Radeon r5 m330 / Intel HD Graphics 5500) The fact that it is switchable does not seem to make the drivers from amd site adapted, so IDK

  2. why dxdiag only shows Intel HD Graphics 5500 and not AMD Radeon r5 m330

  3. should I just turn off the automatic updates (both windows and hp) to maintain the stability of my system?

  Thank you!

  akattom

  We will address the latest first - blocking the MS driver updates.  Follow the instructions in the link to prevent the update of your drivers in Win10 MS: How do I uninstall and updates of block and the drivers on Windows 10

  Now, as for drivers, those of AMD is unlikely to work on your PC, because they are not designed to work with computers that have switchable graphics.

  The best place to get drivers is on the HP support site. The link is on the page of the HP drivers and software for your PC: http://support.hp.com/emea_middle_east-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8566519

  Note: If the link does not show Win10 when you open it, click change and select Windows 10 in the menu drop-down.

  You must install the AMD/Intel switchable graphics high definition of the linked page.

  Good luck

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• Extensions and accessories drive problem

  Hi all

  I designed a form for a user to fill with Acrobat or Reader.  I also wish they were able to add an attachment to the PDF document (including Paul kindly help on).

  Everything works fine when I Preview in Acrobat or LiveCycle, but when I add the reader extensions in Acrobat and re-save the form the attachments button no longer works.  I had a glance on the web regarding this issue.  Can anyone confirm that if you extend the rights in a form, it will disable the ability to add attachments?

  If so, is there a way to solve the problem for someone with only a player to be able to fill out a form and add attachments.

  Once more your opinion is highly appreciated.

  Yes that is correct, but if you drive stretch in Acrobat you can save locally, he digitally sign and comment.

  Paul