BSOD, attached minidump

Hi guys,.

Please find below the minidumps:

https://www.hightail.com/download/UlRSZ28zcHYyWGZ2WnNUQw

Can you tell me what is wrong and what should be checked?

Also, what software are you using to read the minidumps in detail, so that you know what drivers/hw/sw to fix?

Thank you very much

These were related to dne64x. sys (Cisco VPN Client), I'd take off or if you are unable to upgrade to the current version. If your rom 2008

Tags: Windows

Similar Questions

Blue Screen of Death (BSOD) error: (Stop: 0 x 00000116) with (atikmpag.sys)

Specifications:
- HP Pavilion dm4 Notebook PC (laptop)
- CPU: Intel i5 - 2430 m to 2.40 GHz
- RAM: 6.00 GB
- System type: 64-bit
- Operating system: Windows 7 Home Premium
- The version of the BIOS/Date: Hewlett-Packard F.17, 25/01/2013 (latest version of the BIOS)
- Video card: Radeon HD 6470 M and Intel HD Graphics 30000
Question:

As you can see the attached picture explains my problem.

Additional information:
- How it started: one evening I booted up it (at startup video card: Radeon HD 6470 M) > I did not open any file or run programs, given that I have heat at the start at least 2-3 minutes > frozen screen > restarted on its own > BSOD (attached above Image) will not go away.
- This BSOD once and has never been resolved since it occurred.
- I like to play games on this laptop that includes; League of Legends LoL aka, installed other than LoL I also have the call of Duty series (from "World at War" until the last present "ghosts"), Red Alert 3, Red Alert 3 Uprising and HAWKX of Tom Clancy.
- I usually play LoL at least a total of 2-5 h. / day.
- My laptop is properly vented / cooled. (I have my laptop PT placed on 4 cylinders, leaving her underwear and its sides free of any obstructions. It is placed in front of an electric FAN. I also use the air conditioning if I do not use the electric fan)
- Max temperature reaches at least 75-80 degrees Celsius during the game (Normal using search, but I still do not know if its Normal)
- Idle temperature is somewhere between 55-65 degrees Celsius.
- Radeon HD 6470 M Graphics Card is currently disabled in the Device Manager.
- I live in a Tropical climate, Southeast Asia (help?).
- I have switchable graphics cards, I currently use the integrated video card (Intel HD 3000 graphics card) by disabling the Radeon 6470 m from the device via the Boot Manager on Safe MODE.
I have...
- Uninstalled the graphics card (Radeon 6470 m) via (Safe Mode) Device Manager, rebooted the laptop as to allow it to reinstall the video card. (> Screen blacked out > BSOD---> >()has NO WORK)
- Cleared out and my registry using CCleaner --->>> ()has NO WORK)
- Uninstalled the graphics card (Radeon 6470 m) through the device (Safe Mode), passed to Intel Graphics Manager, downloaded the latest drivers Radeon 6470 M by downloading the latest Catalyst drivers from AMD Web site > after completing the download and installation > laptop black screen still works because I can still hear the fan running, the capslock, touchpad, mute and wifi light switch is still sensitive. > had to force stop via a long press on the power button / > restarted > BSOD --->>>()has NO WORK)
- Removed my battery, kept the the cell phone charger plugged in, , while in safe mode, I have disabled the Intel HD 3000 graphics card then will revive Radeon 6470 m > restart > enter screen flashed a second then blocked with a black screen (touchpad, capslock lights mute switch rocker react) > had to force reboot > BSOD. --->>> ()Did NOT WORK)
Finally...
- In reading many forums about this issue, I hope that it is a software and not a hardware problem cause someone says this "the answer is you start Windows in safe mode, which will kill the drivers from the mixture. If you STILL get the BSOD in safe mode, then you more than likely a hardware problem. »
(Sorry for the CAPS, I think this is very important) My CMOS BATTERY IS DETACHED, I DON'T KNOW WHEN OR HOW it HAPPENED AND NO PROBLEM whatsoever has OCCURRED, IT IS CURRENTLY LOOSELY ONCE MORE AND I STILL DON'T KNOW not WHEN OR HOW IT is THEN THAT EVERYTHING IS IN ORDER THE SETTINGS DATE/TIME RESET OCCURRED ONCE WHEN I PUT THE BATTERY IN ITS HOUSING ORIGINAL , BUT like WHAT I SAID EARLIER HE SECONDED in some SORT AND IS STILL DETACHED BUT MY SETTING DATE/TIME IS NOT reset AT ALL (I did research that has detached/removed/off power CMOS battery would keep those type of setting to reset every time you start upward)
- I have not yet tried to reinstall Windows 7 since it is my last resort
- Any form of advice or suggestions are welcome
- Ask me anything about the problem
- Correct me if I did any kind of error
- I'm sorry for any incorrect grammar for English is not my native language
I'll be waiting for your answers and please READ message from all. THANK YOU FOR YOUR TIME! : D

Norman

It might be time to start thinking about a clean reinstall of windows

Blue Screen Error 0x000007a KERNEL_DATA_INPAGE_ERROR

I started to get quite a few topic BSOD errors.
I attach minidump files.

SR

I ran Malwarebytes, but I think it's time that this refresh or reset

Please download the free version of Malwarebytes.

Update immediately.
Do a full scan of the system
Let us know the results at the end.

http://www.Malwarebytes.org/products

Failure of pilot current state - Laura

http://sdrv.Ms/15bVrr4

Need help please... I have attached minidump and sysinfo in link above.

I am pilot state_power_state failure in windows single language 8.1 evaluation overview...

Thanks in advance.

Mzameel

These related to the disk of HD LhdX64.sys of Lenovo driver. Yours is almost 3 years old. I would like to re - install the latest driver available. You must also remove the remnents of Symantec still loading.

Symantec is a common cause of BSOD.

http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us?product=home&version=1

Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html

If you continue to plant I would run a chkdsk

A CHKDSK F: /R

CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

Run CHKDSK/r/f of a high (run as administrator) command prompt.
Do this for each hard drive on your system.
When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

Then restart and let the test to run.
It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

See "CHKDSK LogFile' below to verify the test results.

B Elevated Command Prompt:
Click on start and type "cmd.exe" (without the quotes)
At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"

C CHKDSK LogFile:
Click Start and type "eventvwr.msc" (without the quotes) and press enter
Expand the topic the Windows logs, and then select the Application log file entry.
Double-click the Source column heading.
Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
Copy / paste the results in your next post.

Windows 7 problem Event Name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.11__

I get this error when you use the internet, the blue screen and it restarts. I checked and recontroler drivers please help.

Thank you

> Signing of the problem:
> Problem event name: BlueScreen
> OS Version: 6.1.7600.2.0.0.768.11
> Locale ID: 1033
>
> More information about the problem:
> BCCode: 19
> BCP1: 00000020
> BCP2: FDE42558
> BCP3: FDE42588
> BCP4: 4A0600AB
> OS Version: 6_1_7600
> Service Pack: 0_0
> Product: 768_1
>
> Files helping to describe the problem:
> C:\Windows\Minidump\090610-26566-01.dmp
> C:\Windows\Temp\WER-33384-0.sysdata.xml
>
> Read our online privacy statement:
> http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
>
> If the online privacy statement is not available, please read our privacy
> Statement offline:
> C:\windows\system32\en-US\erofflps.txt
>

The minidump files show constantly the csrss.exe process break with a BAD_POOL_HEADER stop error (19) referencing the win32k.sys.

It's probably another pilot, a third-party driver that is causing the problem.

I would say, at this stage, to enable verifier against any non-Microsoft drivers to stress test them and try to eliminate a problematic driver:

Start > type check in the search programs and files, then press 'Enter' > create standard settings > next > select the names of the drivers in the list > select all non-Microsoft drivers > finish

Restart the computer.

Continue to use the computer normally but if you have any available BSOD brand minidump files.

If after the activation of the Verifier and restart the computer, you receive a BSOD on startup and cannot start Windows, restart the computer in "safe" mode, and follow these steps:

Start > type check in the search programs and files, then press 'Enter' > delete existing settings > finish

Restart the computer, log in Normal Mode and make available any resulting minidump file

I would also say, before you enable Driver Verifier, to download, install, update and run (quick scan should be sufficient) Malwarebytes' Anti-Malware (free version), in the case of McAfee missing something:

http://www.Malwarebytes.org/MBAM.php

BSODS, computer slow, minidump attached

Hello people,

I have Win 7 Home Premium 64 - bit with i3 330M processor, 8 GB RAM and 1 TB SHDD (52 GB free). The machine was relatively fast even with only 52 GB free HARD drive. Then I had a few BSOD and since then laptop has slowed considerably.

https://DL.dropboxusercontent.com/u/1295094/110615-37721-01.zip is a minidump file zipped. I will be happy if some experts can take a look and tell me if I'd be REALLY worried. Although I have given back ups, I can not afford computer crashed right now.

Thanks in advance to 1 million.

These accidents were related to the corruption of memory (probably caused by a driver).

Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You don't need to run memtest again unless the auditor is not the cause, or you want to.

If you are overclocking anything reset by default before running these tests.

In other words STOP! If you don't know what it means that you're probably not

1-Driver Verifier (for full instructions, see our wiki here)

2-Memtest. (You can learn more about running memtest here)

Need help to understand the last string on my Win 7 BSOD. The Minidump files are attached.

Hello

Since last week, I've known several BSOD. Some have referred to a memory problem, but after you run a memory diagnostic seveal times, I still have to find the problem.

Since last week, here is the link to the minidump files.

https://onedrive.live.com/redir?RESID=2FA3EA1D7C87B0CD! 471 & authkey =! AA05X_X_DXaEOgc & ithint = % 2cdmp

Thanks in advance for any help you can give.

These accidents were related to the corruption of memory (probably caused by a driver).

Please run these tests to check your memory and find which driver is causing the problem.

If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

Since then, it is more likely to be a pilot run everything first.

1-Driver Verifier (for full instructions, see our wiki here)

If the auditor does not have the issue we move to it.

2-Memtest. (You can learn more about running memtest here)

If you cannot start after you have enabled the auditor reboot in safe mode

In Vista & victory (F8)

When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

Co-written by JMH3143

.

Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.

Loading file Dump [C:\Users\Ken\Desktop\New folder\080714-32011 - 01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol of validation of the path summary *.
Location of response time (ms)
Deferred srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
Computer name:
Kernel base = 0xfffff800'03660000 PsLoadedModuleList = 0xfffff800'038 has 3890
The debugging session: Thu Aug 7 14:15:03.891 2014 (UTC - 04:00)
System Uptime: 0 days 4:02:55.202
Loading the kernel symbols
...............................................................
................................................................
........................
Loading user symbols
Loading unloaded module list
.......
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Bugcheck 50, {fffff6e400084040, 0, fffff800036e7f42, 5}

Could not read the name of the problem driver
Probably caused by: memory_corruption (nt! MiUpdateWsle + 122)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
It must be protected by a probe. In general, the address is simple bad or it
pointing to freed memory.
Arguments:
Arg1: fffff6e400084040, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800036e7f42, if not zero, the address of the instruction that refers to bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging information:
------------------

Could not read the name of the problem driver

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390d100
GetUlongFromAddress: cannot read fffff8000390d1c0
fffff6e400084040 non paged pool

FAULTING_IP:
NT! MiUpdateWsle + 122
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0 X 50

Nom_processus: vsserv.exe

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

TRAP_FRAME: fffff8800970b550-(.trap 0xfffff8800970b550)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000098000000000 rbx = 0000000000000000 rcx = 0000000000000a0f
RDX = 0000c 80010808009 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff800036e7f42 rsp = fffff8800970b6e0 rbp = 0000000000000c 70
R8 = fffff6e400084040 r9 = 0000000fffffffff r10 = fffff70001080488
R11 = 000000000000116e r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv in pe of na EI ng nz cy
NT! MiUpdateWsle + 0 x 122:
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8] ds:fffff6e4'00084040 =?
Reset the default scope

LAST_CONTROL_TRANSFER: from fffff800037525b3 to fffff800036d5bc0

STACK_TEXT:
"fffff880 '0970b3e8 fffff800' 037525b 3: 00000000'00000050 fffff6e4 ' 00084040 00000000 00000000' fffff880 ' 0970b 550: nt! KeBugCheckEx
fffff880 '0970b3f0 fffff800' 036d3cee: 00000000 00000000' fffff6e4 ' 00084040 fffffa80' 04122600 fffffa80'00000028: nt! : FNODOBFM: 'chain' + 0 x 43801
fffff880 '0970b 550 fffff800' 036e7f42: fffffa80'00000028 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
fffff880 '0970b6e0 fffff800' 036f41bd: 00000000' 00000a0f 00000000' 23ba4548 fffff700 ' 01080000 fffff700' 01080000: nt! MiUpdateWsle + 0 x 122
fffff880 '0970b 750 fffff800' 036f39df: 20f00001 '63eb7025 00000001' 63eb7121 fffffa80' 04e10200 00000000' 00000000: nt! MiCompleteProtoPteFault + 0x2cd
fffff880 '0970b7e0 fffff800' 036f24f3: 00000000' 0016bd60 000007fe'fbef34ac fffff683 'ff7df798 fffffa80' 07f6cd08: nt! MiResolveProtoPteFault + 0x1cf
fffff880 '0970b 870 fffff800' 036e2179: 00000001 00000000' 000007fe 'fbef34ac fffffa80' 09a44af0 00000000' 00000000: nt! MiDispatchFault + 0x1c3
"fffff880 '0970b 980 fffff800' 036d3cee: 00000000 ' 00000008 000007fe ' fbef34ac fffff880'00000001 00000000' 0863fe50: nt! MmAccessFault + 0 x 359
fffff880 '0970bae0 000007fe' fbef34ac: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
00000000' 0863fb68 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fe'fbef34ac

STACK_COMMAND: kb

FOLLOWUP_IP:
NT! MiUpdateWsle + 122
fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: nt! MiUpdateWsle + 122

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb

IMAGE_VERSION: 6.1.7601.18409

Nom_image: memory_corruption

FAILURE_BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:x64_0x50_nt! miupdatewsle + 122

FAILURE_ID_HASH: {adc90a39-f60f-e57a-aeeb-d2a428d2eb03}

Follow-up: MachineOwner
---------

My computer has crashed with BSOD - I have miniDump file link

Sony Vaio

Windows 7

Intel Core 2 Duo T6600 CPU 2.20 GHz

4 GB OF RAM

Crucial SSD - M4-ct128m4ssd2cca

Norton

My computer went to bsod last week - tried cleaning registry and dskchk and pilot - I went through the drivers and found one in need of an update - update has been blocked by norton. No problem for a while, then was crushed this evening - also previous accidents create minidump files - but this one did - here's the link (((CORRECTED)))

https://SkyDrive.live.com/redir?RESID=B19C18E006620FEE! 109 & authkey =! AGMr2-pOWW1-sR8&ithint=file%2c.zip

Thank you

Hello

The attached file of the DMP is (7A) KERNEL_DATA_INPAGE_ERROR bug check.

This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

Error checking 7 a, {fffff6fc40007f08, ffffffffc000000e, 4c4f8860, fffff88000fe1630}

The 2nd parameter of the bug check is 0xc000000e = DISK_HARDWARE_ERROR: there is error with hardware disk.

0xC000000E or STATUS_NO_SUCH_DEVICE, usually indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.

It is also possible that a driver is causing corruption.

-----------------

1. uninstall ArcSoft Magic - i Visual effect.

2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is probably cause conflicts:

Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

3. SFEP.sys - Fri Aug 03 01:35:53 2007

^^ Sony Firmware Extension parser - 2007 pilot version has problems BSOD in Win7 (yours is 2007).

Update ASAP - http://esupport.sony.com/perl/select-system.pl

4 uninstall InterVideo, it seems to be linked to Corel - http://www.corel.com/corel/pages/index.jsp?pgid=800034

If you still crash after all the foregoing, we probably hard drive failure which we will then move on diagnostics.

Kind regards

Patrick

BSOD and analysis of Minidump to a week old HP ENVY17

I just got my new ENVY 17 w / Intel Core [email protected] with 8 GB RAM on 4 February. And, although I love the speed, the ability to run CS5 and the opportunity for the kids to play games like SC2, it is already clear that there are questions.

On 6 February, I received the first BSOD. Since then, I got them on several occasions, once on 8 February, 2 February 9, 2 February 10 and already today.

To study, I have install WINDbg and analyze dump files. They look something like this, saying: ntkrnlmp.exe is probably to blame:

Loading Dump File [C:\Windows\Minidump\020611-46519-01.dmp]Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/downloads/symbolsExecutable search path is:Windows 7 Kernel Version 7600 MP (8 procs) Free x64Product: WinNt, suite: TerminalServer SingleUserTSBuilt by: 7600.16617.amd64fre.win7_gdr.100618-1621Machine Name:Kernel base = 0xfffff800`02c1b000 PsLoadedModuleList = 0xfffff800`02e58e50Debug session time: Sun Feb  6 13:04:15.865 2011 (UTC - 5:00)System Uptime: 0 days 22:16:59.052Loading Kernel Symbols.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.Run !sym noisy before .reload to track down problems loading symbols.

......................................................................................................................................................................................Loading User SymbolsLoading unloaded module list......********************************************************************************                                                                             **                        Bugcheck Analysis                                    **                                                                             ********************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050033, 6f8, fffff80002c53ec0}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner---------

2: kd> !analyze -v********************************************************************************                                                                             **                        Bugcheck Analysis                                    **                                                                             ********************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)This means a trap occurred in kernel mode, and it's a trap of a kindthat the kernel isn't allowed to have/catch (bound trap) or thatis always instant death (double fault).  The first number in thebugcheck params is the number of the trap (8 = double fault, etc)Consult an Intel x86 family manual to learn more about what thesetraps are. Here is a *portion* of those codes:If kv shows a taskGate        use .tss on the part before the colon, then kv.Else if kv shows a trapframe        use .trap on that valueElse        .trap on the appropriate frame will show where the trap was taken        (on x86, this will be the ebp that goes with the procedure KiTrap)Endifkb will then show the corrected stack.Arguments:Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULTArg2: 0000000080050033Arg3: 00000000000006f8Arg4: fffff80002c53ec0

Debugging Details:------------------

BUGCHECK_STR:  0x7f_8

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from fffff80002c8aca9 to fffff80002c8b740

STACK_TEXT:  fffff880`0316ade8 fffff800`02c8aca9 : 00000000`0000007f 00000000`00000008 00000000`80050033 00000000`000006f8 : nt!KeBugCheckExfffff880`0316adf0 fffff800`02c89172 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69fffff880`0316af30 fffff800`02c53ec0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2fffff880`03186af0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SeAccessCheckFromState+0x58

STACK_COMMAND:  kb

FOLLOWUP_IP:nt!KiDoubleFaultAbort+b2fffff800`02c89172 90              nop

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  nt!KiDoubleFaultAbort+b2

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

FAILURE_BUCKET_ID:  X64_0x7f_8_nt!KiDoubleFaultAbort+b2

BUCKET_ID:  X64_0x7f_8_nt!KiDoubleFaultAbort+b2

Followup: MachineOwner---------

Other information you'd like to know is Yes, it works warm, but I have a cooling block running at all times. He runs about 43 to 47 under normal operating conditions and under intensive use does not go above 70 C. The value of Tj Max for the processor said 100 c, so I don't "think it crashes because of the heat.

I thought that maybe it was a driver problem, so I tried to update the drivers for my video controllers and network and it says that I have the best driver installed. Seems that after the crash, my wireless network do not reconnect by itself and will not not connect what either, so I feel as if there is a network problem. I have to restart again just to have the wireless function.

Does anyone have any ideas as to what could be the cause of the BSOD? If I can't find a solution, I can just be back to this HP laptop.

Thanks for any idea.

Since this is a brand new computer, I don't think that faulty RAM is the cause. After some additional research on issues that others were with this model, I reduced to the HP Support Assistant (HPSF_Utils.exe). Whenever I tried to run this software, it would result in an error. I even uninstalled and downloaded the latest version of HP and it still would not work.

So I removed it altogether 13 Feb and I did have a blue screen since, while I was getting blue screens every day and sometimes twice a day with the computer straight out of the box.

Hope this helps someone else.

Driver power state failure; BSOD; Cannot open the minidump files

Two weeks, my computer with Vista has started giving me a BSOD with status message driver failure. I found the minidump files, but cannot open them. The BSOD usually occurs after the computer has entered a sleep or hibernation. I have not added any equipment to the computer and Norton 360 when I scan computer everything seems OK. It is August 10, 19, then 23, also. Don't know what the cause of the problem. Is there general reasons that could cause this or is - associated virus or what?

Thank you

Hello

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 answers (now 4).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

You can use BlueScreenView to stick the BSOD info in a message here.

NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
Paste the lines in a message here. Make sure and check the file name section. Also check the time
in MyEventViewer for more information as possible.

===========================================================

Check out these utilities to see if information may be collected:

It is an excellent tool for displaying the blue screen error information

-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html

-------------

MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html

------------

AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

"Windows has recovered from an unexpected shutdown" minidump (BSOD) Windows 7 file

I had trouble with the BSOD Windows 8.1 and 10 so I went back to windows 7. It has been working well for some time however, when I play a video game it crashes. This is the first time since that I resorted to windows 7. Unlike Windows 8.1 and 10 I can boot into normal mode so I can continue to do what I want to do but I'd like to solve this problem, if it is severe.

Here is the information of the accident.

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

More information about the problem:
BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA80009C3A50
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files helping to describe the problem:
C:\Windows\Minidump\062616-26941-01.dmp
C:\Users\Brendan\AppData\Local\Temp\WER-55520-0.SysData.XML

If someone could please answer and show the steps to solve this problem that would be greatly appreciated.

Thank you.

Error checking 1A, {41284, 1 c 560001, 3fe0, fffff70001080000}

Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 4ac3)

No drivers have been appointed in accidents, so please activate the driver verifier:

Enable Driver Verifier:

http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

Make a memory Test:

http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/BSOD-memory-problems-test-easily-and-completely/21c3f63f-F570-4522-b2ef-ecc7b7ff6461

Download the new landfills when you get Driver_Verifier_detected_voilation

Minidump BSOD Win7

Hi guys,.

I need help to find the root cause of the BSOD I get.

IV got the minidump file, but no way to read it.

Here is a link of the minidump: http://s000.tinyupload.com/index.php?file_id=96653471386466486657

Thank you!

Your help is very appreciated.

These accidents are called BCC116 and are associated with your video subsystem. Please follow the instructions of this wiki

Please, hoping to help BSOD: link to file included :) - Minidump IRQL_NOT_LESS_OR_EQUAL

Hello world

I have never actually solved a BSOD problem, and I hope that this will be my first time! :)

Here is the link to my Minidump file: http://1drv.ms/1eGOvpv

My utility BlueScreenView says that ntoskml.exe is somehow involved - but other threads on this site of questions and answers suggest that this is probably just a symptom, not the cause, of my BSOD.

All of your help, input and advice is much appreciated!

Jay

Hi Patrick,

Well, my problem is SOLVED and you played a huge role to solve. But... it has not been resolved as we both waited. Unfortunately, the new external hard drive enclosure did not prevent the BSOD little once the drive has been removed safely. But! :) Helped you eliminate so many root causes (AVG, Norton...) and you had raised the possibility of a pilot did not cooperate, so I was wondering what (s) may be involved in my external hard drive is disconnected. By chance, when I searched on Google, I've included a search term that I never thought about you: eSATA! My external hard drive is connected via eSATA. So when I search Google Dell, BSOD and eSATA, I soon saw a page which seems to indicate that I should check that I had the last pilot technology Intel Rapid Storage Technology. And sure as heck, I had not installed at all! Then, installed this driver and - bingo! -everything works perfectly now!

But I NEVER would have gotten there if you had not encouraged me before and help narrow my focus on the external hard drive and drivers. Yes, thank you Patrick! So far as I am concerned you have solved this mystery, more than any! And I am eternally grateful!

Jay

Windows 7 BSOD, minidumps uploaded to skydrive

I started having these BSOD very frequently in the last week. I have a windows box 7. Can you please take a look at the minidump transferred to skydrive files and suggest the remedy!

https://SkyDrive.live.com/redir?RESID=46F4AD019F7ED3DC! 165 & authkey =! AIj-dVKjbeDksrk

Vikaaas

Related to these 3 NETwLv64.sys Wireless WiFi Link Driver of Intel Corporation. I would like to re - install the most recent driver.

I have also update these drivers and remove and replace Symantec with MSE

PxHlpa64.sys Wed Mar 12 21:58:17 2008 (47D88A39)
Sonic driver CD/DVD (used by many different programs of CD/DVD)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

VSTCNXT6. SYS Wed Oct 15 20:52:22 2008 (48F69046)
Conexant SoftK56 Modem driver
http://www.carrona.org/drivers/driver.php?id=VSTCNXT6.sys

VSTAZL6. SYS Wed Oct 15 20:53:42 2008 (48F69096)
Conexant SoftK56 Modem driver
http://www.carrona.org/drivers/driver.php?id=VSTAZL6.sys

VSTDPV6. SYS Wed Aug 15 20:57:45 2008 (48F69189)
Conexant SoftK56 Modem driver
http://www.carrona.org/drivers/driver.php?id=VSTDPV6.sys

e1e6032e.sys kills Mar 24 14:17:23 2009 (49C923B3)
Intel 82562V-2 10/100 Network Connection Ethernet driver
http://www.carrona.org/drivers/driver.php?id=e1e6032e.sys

Intelide.sys MON Jul 13 19:19:48 2009 (4A5BC114)
IDE Intel storage driver
http://www.carrona.org/drivers/driver.php?id=Intelide.sys

rimmpx64.sys Thu Sep 3 06:37 2009 (4A9F9C4C)
Ricoh memory card reader driver
http://www.carrona.org/drivers/driver.php?id=rimmpx64.sys

rimspx64.sys Thu Sep 3 06:59:25 2009 (4A9FA18D)
Ricoh memory card reader driver
http://www.carrona.org/drivers/driver.php?id=rimspx64.sys

rixdpx64.sys Thu Sep 3 07:14:28 2009 (4A9FA514)
Ricoh memory card reader driver
http://www.carrona.org/drivers/driver.php?id=rixdpx64.sys

nvBridge.kmd Sat Sep 5 21:04:51 2009 (4AA30AB3)
nVidia Compatible Vista driver in Kernel Mode (probably part of the chipset nForce drivers)
http://www.carrona.org/drivers/driver.php?id=nvBridge.KMD

nvlddmkm.sys 5 Sat Sep 21:31:30 2009 (4AA310F2)
drivers nVidia video
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
AMD - usually from the Windows 7 DVD storage controller driver
http://www.carrona.org/drivers/driver.php?id=amdxata.sys

Symantec is a common cause of BSOD.

I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html

http://www.Microsoft.com/security_essentials/

BSOD please help (minidumps)

(Title)

If someone can look into my problem it would be so much fun :)

I get the BSOD recently several times since yesterday

Dropbox: Minidump

Errors that show BSOD: (not the same BSOD)

KERNEL_DATA_INPAGE_ERROR

IRQL_NOT_LESS_OR_EQUAL

Hello

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

1: kd > .trap 0xfffff8801936a6c0
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000000000000000 rbx = 0000000000000000 rcx = fffffa8004bb4780
RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff88001da61e3 rsp = fffff8801936a850 rbp = fffff8801936a9a0
R8 = fffff8801936a9f8 r9 = fffff8801936aae8 r10 = fffffa8004cb4ce0
R11 = 0000000000000009 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl nz na po nc
Tcpip! : FNODOBFM: 'string' + 0x206ab:
fffff880 '01da61e3 f0ff8058010000 lock inc dword ptr [rax + 158 h] ds:00000000' 00000158 =?

A lock statement about the value in rax + 158 h is broken.

fffff880 '1936b6b0 fffff880' 17c064d4 c:\windows\system32\drivers\fwpkclnt! FwpsReleaseClassifyHandle0 + 0xf
fffff880 '1936b6e0 fffffa80' of the mwac + 0x64d4 08fda770
fffff880 '1936b6e8 00000000'00000002 0xfffffa80' 08fda770
fffff880 '1936b6f0 fffff880' 17c0e500 0 x 2
fffff880 '1936b6f8 00000000' 00000002 mwac + 0xe500
fffff880' 1936b 700 00000000'00000002, 0x2
fffff880 '1936b 708 fffff880' 17c06f79 0 x 2
fffff880 '1936b 710 fffffa80' of the mwac + 0x6f79 08fda770
"fffff880'1936 b 718 fffff880 ' 00000002 0xfffffa80 08fda770.
fffff880 '1936b 720 fffff880' 17c0e7c0 0xfffff880'00000002
fffff880' 1936b 728 00000000'00000002 mwac + 0xe7c0
fffff880' 1936b 730 00000000'00000002, 0x2
fffff880 '1936b 738 fffff880' 17c044b0 0 x 2
fffff880 '1936b 740 fffff880' of the mwac + 0x44b0 17c0e800
fffff880' 1936b 748 00000000'00000002 mwac + 0xe800
fffff880 '1936b 750 fffffa80' 03efb100 0 x 2
fffff880 '1936b 758 00000000'03050002 0xfffffa80' 03efb100
fffff880 '1936b 760 fffffa80' 09deccf0 0 x 3050002
fffff880 '1936b 768 fffff880' 17c0328f 0xfffffa80'09deccf0
fffff880' 1936b 770 00000000 00000000' mwac + 0x328f

This is caused by the driver of Malwarebytes Web Access Control, causing file system/NETBIOS conflicts. Update or uninstall Malwarebytes as soon as POSSIBLE.

Kind regards

Patrick

BSOD, attached minidump

Similar Questions

Maybe you are looking for