BSOD please help (minidumps)

Similar Questions

• 0x000000ce BSoD - please help!

  "STOP 0x000000ce DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION" the BSoD arose three times in the last two weeks on my laptop. Everything started after I installed Kaspersky software (and I have to remove Norton/Symantec/and any other virus removal software to do this). I read that Symantec device drivers have been known to cause a BSoD. Any help to fix this pain in the * would be much appreciated!

  Hi Anna,.

  Let us work together to solve this problem.

  Please answer these questions:

  1. you installed hardware drivers recently?

  2 any special request triggers the Blue Screen of Death?

  This stop message occurs when you install a faulty device driver or system service, the pilot could not cancel pending operations before returning.

  I ask you to follow the steps in the following link:

  How to fix Stop error on a blue screen
  http://support.Microsoft.com/kb/958233

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Note: it is recommended to backup your data to be on the safer side.

  Please send us so minidump files. The dump files are her mini at the C:/Windows/Minidump.

  Please let us know the status of the issue.

• BSOD please help

  Hi, I keep on getting the Bsod I want to play this game called soldier front of ijji. I get on this stop error message and I don't know what to do. I tried to rebot my computer still dosent work here is a stop error message.
  Stop: 0X0000007E (0XC0000005, 0X81C01674, 0X8A05DBB0, 0X8A05D8AC)

  Help, please
  Thank you

  I found the solution to my question. I just downloaded the sp1 offered on this post and went on the safe mode and installed. Now, it works fine. I tried to find if the tool of readilness systems has been installed, but I cound not be sentenced to a fine any trace of him, so I think that the solution is to install on a safe mode.

  PPL thanks for your help.

• Windows 7 DMP files included BSOD Please Help!

  For last 1-2 weeks have BSOD on my pc. I reinstalled Windows 7 Home Premium several times. A few days after each re - install Win 7 I start receving BSOD. I formatted my disk, partitions, etc. I just need to solve these BSOD. I've included below DMP and Dump WhoCrashed logs files. In these papers he suggests that my drivers could be the cause of crashes of theses. Let me know what is wrong in the comments below.

  Thank you

  Mike Read

  DMP files:
  https://onedrive.live.com/redir?RESID=40F0655702713F9A%21176

  Data sheet:
  Motherboard:
  -All Series, ASUS, ASUSTeK COMPUTER Inc., Z87.-k.
  CPU:
  -GenuineIntel Intel (r) Core i5 - 4670 K CPU @ 3.40 GHz Intel586
  Graphics card:
  -GeForce GTX 660 ti
  RAM:
  -8 GB company unknown.<-------Ran memtest="" 86="" on="" this="" ram,="" no="">
  Hardrives:
  -C = disk 128 GB SanDisk SSD drive
  -Drive(Gaming/storage) E = TOSHIBA 2 to 7200 RPM 64 MB cache

  WhoCrashed reports:

  Saturday, may 10, 2014 3:55:02 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5023-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (0xFFFFF6FCC8078408, 0xFFFFF80002CE089A, 0x2, 0x0)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:36:38 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-10405-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 4211)
  Verification of error code: 0 x 24 (0xFFFFF8800B088068, 0xFFFFF8800B0878C0, 0x1904FB, 0xFFFFF80002DBEB05)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, may 10, 2014 3:33:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-28782-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 34 (0x55F, 0xFFFFFFFFC0000420, 0 x 0 0 x 0)
  Error: CACHE_MANAGER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a problem has occurred in the file system cache manager.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:29:40 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA800339B0A0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:49:28 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-54974-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA80033A5C30, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:40:44 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-8829-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003335C10, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:37:22 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5506-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002ABDAC5, 0xFFFFF88009801810, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:32:51 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-7753-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003389BE0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  We have three controls compatible bug:

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {41790, fffffa800339b0a0, ffff, 0}

  - Parameter 1 of the bug check is 41790 indicating a page table was corrupted.
  

  3: kd > dt nt! _MMPFN fffffa800339b0a0
  + 0 x 000 u1:
  + 0 x 008-u2:
  + 0 x 010 PteAddress: 0xfffff6fb'40000050 _MMPTE
  + 0 x 010 VolatilePteAddress: 0xfffff6fb'40000050 empty
  + lock 0 x 010: 0n1073741904
  + 0 x 010 PteLong: 0xfffff6fb'40000050
  + 0 x 018 u3:
     + 0x01c UsedPageTableEntries: 0xffff
  + 0x01e VaType: 0 ''
  + 0x01f ViewCount: 0 "
  + 0 x 020 OriginalPte: _MMPTE
  + 0 x 020 AweReferenceCount: 0n128
  + 0 x 028 u4:

  UPTE has fallen below zero, which implies usually a driver caused the corruption (or faulty RAM memory).

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff80002abdac5, fffff88009801810, 0}

  3: kd > fffff80002abdac5 ln
  (fffff800'02abdac5)   nt! ExpInterlockedPopEntrySListFault16 |  (fffff800'02abdad0) nt! ExpInterlockedPopEntrySListEnd16

  The exception is produced in nt! ExpInterlockedPopEntrySListFault16.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ---------------------

  Run Memtest for NO LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Get IRQL_NOT_LESS_OR_EQUAL BSOD - please help.

  View blue screen PROGRAM:

  082116-10982 - 01.dmp 21/08/2016 07:24:02 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000008 00000000'00000002 00000000'00000001 fffff800'030d19bf ntoskrnl.exe ntoskrnl.exe + 6f400 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.23418 (win7sp1_ldr.160408 - 2045) x 64 ntoskrnl.exe + 6f400 C:\Windows\Minidump\082116-10982-01.dmp 6 15 7601 292 152 8/21/2016 07:24:46

  The last 4 events dump files:

  http://www.filedropper.com/minidump_1

  I did memtests with windows and with memtest86 and found no errors, but only made one pass...

  Thanks for your help!

  Update the following drivers from the links provided.

  NVIDIA GeForce GTS 450.

  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Browse all global symbols data functions
  Timestamp: Thu Mar 04 06:07:52 2014 (5315B 408 )

  http://www.nvidia.com/download/driverResults.aspx/105847/en-us

  Update your BIOS to version 0307

  The machine credential [of Smbios 2.5, DMIVersion 0, size = 2414]
  BiosMajorRelease = 8
  BiosMinorRelease = 15
  BiosVendor = American Megatrends Inc.
  BiosVersion = 0305<== currently="">
  BiosReleaseDate = 09/09/2010
  SystemManufacturer = system manufacturer
  SystemProductName = system product name
  Family = to be filled by O.E.M.
  SystemVersion = Version of the system
  SystemSKU = to be filled by O.E.M.
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = M4A88T-V EVO/USB3
  BaseBoardVersion = Rev X.0x

  M4A88T-V EVO/USB3 Driver & tools

  https://www.ASUS.com/motherboards/M4A88TV_EVOUSB3/HelpDesk_Download/

  Update   NIC Broadcom 802.11 USB driver

  Loaded symbol image file: bcmwlhigh664.sys
  Image path: \SystemRoot\system32\DRIVERS\bcmwlhigh664.sys
  Image name: bcmwlhigh664.sys <== broadcom="" usb="">
  Browse all global symbols data functions
  Timestamp: Thu Jul 31 04:11:20 2012 (50179328)

  bcmwlhigh664.sys: https://www.SysNative.com/drivers/driver.php?id=bcmwlhigh664.sys

  IF the system continues to crash after update, run driver verifier and to share a link to the discharge resulting.

  Driver Verifier - stalking a bad driver to behave.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-Update/Driver-Verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

• Blue screen, but it is NOT BSOD - please help!

  I have a virtual Windows XP, I used for a long time and you stupidly don't have active Auto-Protect. So my only SnapShot is too old to use.

  I tried to disconnect from my Windows XP machine yesterday and the screen went blue. My mouse can move inside the Virtual Machine, but I can't do anything.

  I tried to stop, but nothing seems to happen. I tried to send a Ctr Alt Del to it and nothing.

  Help, please!

  Press the Option key and select form off voltage or reset the Virtual Machine menu.  Note: This is considered a stop/reset and can have consequences, but you will have no other choice, if all normal methods have failed.

• NVIDIA 8400 GS display freezes driver Windows 7 with BSOD - please help

  Hello

  I have a desktop HP Pavilion Elite m9040n. I've upgraded to Windows 7 Ultimate 32 bit about 6 months ago. It works fine, but the last few weeks that my PC keeps freezing with the display driver to crash. The last update of Windows or Adobe Flash player could have caused it? I tried different versions of the Nvidia Windows 7 display driver without success.

  Any suggestions?

  I replaced my graphics card to an ATI Radeon HD 4350 (I got to use it and could not go higher because of the restrictions of electricity in my PC motherboard) and all the problems have been resolved. Just an info.

• T430s - BSOD (of driver power state failure). Please help identify the driver

  I meet regularly with BSOD on my T430s / Win7 when switching mode standby (Fn + F4). The error message is driver_power_state_failure. This happens almost every day. Driving me crazy!

  I know it's a common problem (I also had with a former T500, but not on T420). After Googling around, I discovered WinDBG and how to identify the faulty driver that is causing the problem.

  However, I could not install the tool - or debuggers package (referenced on windbg.org), nor the tool set + a .NET framework from the Microsoft Web site. The old guard quit the installer with no message (although the Remove Programs dialog shows the thing installed, it seems to be no program to run), the latter does install without no diagnosis (installation only, tried the debugging tools tried to install the complete package - same result).

  So, can someone please help to analyze the memory dump and to identify the faulty driver? What file is needed for this - the memory full image (from folder/Windows /, ~ 500 MB in size) or the minidump file (from/Windows Minidump file / / /, ~ 700 KB in size)? Or both?

  Help a fellow fan of ThinkPad enjoy his work tool

  Several days after, I don't get BSOD more, even though I kept pushing the laptop "standby mode" on a regular basis, with or without food. Since already BSOD passed almost every day (to, like, try every 3rd or 4th go to sleep) and now there is none, I would try and call this problem is "solved".

  Let's see if just once he returns

  I'm not really sure what has helped exactly - I've only updated (a little) drivers manually (after Lenovo update system running with only a few boxes checked). These pilots were audio, video and network ones. USB 3.0 driver has been updated before, but that alone did not effect.

  I've also updated the BIOS via the Lenovo system update (strange, but it worked, unlike my manual attempt via downdloading non-bootable-CD version of the Lenovo Web site).

  Hope this helps other people are having the same problem.

• Please help me solve this BSOD ntoskrnl.exe, ntkrnlmp.exe

  Hello

  I have problems with my new computer since I bought it, it started giving problems. Now this BSOD. I am totally frustrated with it. Please help me get rid of this questions.
  Here is the link of the minidump file:
  https://SkyDrive.live.com/redir?RESID=1F218460C89B0917%21114
  I guess that the culprit is wireless driver. With the old version of the wireless driver, I got another BSOD, so I uninstalled and installed the most recent version. Still problem persists.
  With whoCrashed, I found this information:
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i7-3610QM CPU @ 2.30 GHz Intel586, level: 6
  8 logical processors, active mask: 255
  RAM: 8469991424 total
  VM: 2147352576, free: 1902690304

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Tuesday, December 23, 13 9:36:04 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\122313-27736-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 72680)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Tuesday, December 23, 13 9:36:04 CEST your computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Please help me. Thanks in advance.

  Apvmz

  This phenomenon was related to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc.  Yours is almost 2 years so not the most recent.

  I would like to re - install the latest driver available

• BSOD! Please Help, product number HP Pavilion LK237AV

  HP Pavilion DV6 - LK237AV product number

  Win7 Home Premium 65-Bit

  Just recovered

  BSOD 2 months after unpacking box, to present.

  Please help me with this HUGE! problem, I already try all possible solutions to this problem, but nothing works.

  The BSOD is completely random.

  Here is the link to download a Zip file with the files of my problem minidumps.

  http://www.mediafire.com/?8twaz7x23dtp1zw

  If anyone can help me, I will be grateful.

  Thank you very much for your great help!

  PD: Sorry for my bad English.

  Hello

  Uninstall the current driver for the Broadcom wireless card.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  When you do this, you can test the RAM and HARD drive.

  In the link below, you will find all the details of how you can do this:
  How to test the RAM and HARD drive (HDD).

  PS.

  Latest BSOD was caused by Norton Internet Security, but for now I don't want to do something, because this situation happened only once. Because of course, it is recommended to check there at - it an update for this software.

• PC automatically shutsdown after every 30 min. I have the last MS Security Essentials installed and running and also the MS Malicious software installed, but none are able to detect any virus or harmful software. Please help in this regard.

  PC automatically shutsdown after every 30 min.  I have the last MS Security Essentials installed and running and also the MS Malicious software installed, but none are able to detect any virus or harmful software.  Please help in this regard.

  You get a bsod?

  Please check the event log to see if there are errors, helping to explain what is happening. Also check the c:\windows\minidump folder. Are there files .dmp created here with the dates that it closed? If so please download them on your skydrive so watch us closer.

  See you soon.

  MyPcHealth - free tools

• Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

  Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Small blue screen issue Please Help

  Hello

  I turned on my pc this morning an appeard blue screen with something like the following below.

  I've never seen before read something like - if seen first computer reboot /hardware - then went to connect (before I pressed F9 - diagnostic tool

  to see if something was wrong--all passed) then watch Windows error recovery screen I pressed "Start windows normally" because I don't know what the other 3 meant that I'm not this technique.

  Logged in - Message appeared "Windows has recorved against an unexpected closed, a windows problem caused to stop working correctly". I looked at the event log, but I have no idea what I want to really, I vacuum the back on pc - the dust ect... Please help because I do not want to see it again / please if anyone is nice enough help me please that they have no basis.

  I'm running Windows Vista Home premium service pack 2

  I look forward to your reply.

  BS

  I understand.  The files are newspapers of accidents and have nothing to do with your operation systems.  You can do what suggests the wiki for when access is denied without too much worry about a problem

  Try this

  If you get "access denied" try this method

  First, create a folder on the desktop and call Minidump

  Open the C:\Windows\Minidump folder and do the following:

  Home > select all > Home > copy to > choose location > Minidumps > copy

  Then right click on the Minidump file > Send to > compressed (zipped) folder.

  Then download the compressed (zipped) folder newly created on Onedrive and provide a link here.

• PC continues to plant at an exponential rate! Windows blue screen error with the OS Version: 6.1.7601.2.1.0.768.3 & locale ID: 1033. Please, Please HELP me, if you can!

  I tried to solve the problem for 77 hours in a row - no sleep, or what anyone else - but little matter what I do, my PC guard crashing & gets worse! Please, someone, anyone, please help me! I was unable to determine what is the problem, and even less how to solve below I have included the automation Windows Recovery Wizard Info., related to my technical problems. the most recent two system crashes/blue screen overlays; Also, thank you so much, in advance.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: a

  BCP1: FFFF80001B033200

  BCP2: 0000000000000002

  BCP3: 0000000000000000

  BCP4: FFFFF80002EC0FF8

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\111815-9921-01.dmp

  C:\Users\Nathan\AppData\Local\Temp\WER-31075-0.SysData.XML

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: a

  BCP1: FFFFFA801D5CF370

  BCP2: 0000000000000002

  BCP3: 0000000000000001

  BCP4: FFFFF80002F46626

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\111815-10264-01.dmp

  C:\Users\Nathan\AppData\Local\Temp\WER-34866-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  As stated in the wiki, you must download the files dmp verified on a disk (or any file sharing site) and we give a link to the files in your next post.

• Constant blue screen, please help!

  For these last months, I get a blue screen that is associated with a memory error. I lowered the score of 10 to 7, hoping to solve the problem, but it continues. My ideas, please help!

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800C9DE030
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\111215-10779-01.dmp
  C:\Users\PC\AppData\Local\Temp\WER-35475157-0.SysData.XML

  Hello

  Thanks for posting your query in Microsoft Community.

  From now on, I would ask to refer to the troubleshooting steps outlined in the article below which will help you resolve stop (blue screen) errors.

  Resolve stop (blue screen) error in Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.