BSOD ntoskrnl.exe + 72 0x0000009f DRIVER_POWER_STATE_FAILURE has 40

Similar Questions

• After sleep ntoskrnl.exe error 0x0000009f DRIVER_POWER_STATE_FAILURE

  DRIVER_POWER_STATE_FAILURE after sleep

  When I put my laptop to sleep by closing the lid or choosing sleep from the beginning, I get a bsod (ntoskrnl.exe 0x0000009f DRIVER_POWER_STATE_FAILURE) when the recovery.
  BlueScreenView report:http://dl.dropbox.com/u/12993257/bsod.htm
  Empty the file: http://dl.dropbox.com/u/12993257/091211-34538-01.zip
  Also, for some reason that I do not get the bsod when it puts itself in standby (IE after expire) but I understand when it hibernate itself.
  Any help is appreciated!
  Phil

  Hi chubble10,

  Method 1
  I suggest you try the steps from the following links:

  Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".
  http://support.Microsoft.com/kb/975599

  stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/981848

  Method 2
  This issue could be due to corruption of the graphics card driver. I suggest you to update the graphics card drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Please help me solve this BSOD ntoskrnl.exe, ntkrnlmp.exe

  Hello

  I have problems with my new computer since I bought it, it started giving problems. Now this BSOD. I am totally frustrated with it. Please help me get rid of this questions.
  Here is the link of the minidump file:
  https://SkyDrive.live.com/redir?RESID=1F218460C89B0917%21114
  I guess that the culprit is wireless driver. With the old version of the wireless driver, I got another BSOD, so I uninstalled and installed the most recent version. Still problem persists.
  With whoCrashed, I found this information:
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i7-3610QM CPU @ 2.30 GHz Intel586, level: 6
  8 logical processors, active mask: 255
  RAM: 8469991424 total
  VM: 2147352576, free: 1902690304

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Tuesday, December 23, 13 9:36:04 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\122313-27736-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 72680)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Tuesday, December 23, 13 9:36:04 CEST your computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Please help me. Thanks in advance.

  Apvmz

  This phenomenon was related to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc.  Yours is almost 2 years so not the most recent.

  I would like to re - install the latest driver available

• Windows 7 BSOD - ntoskrnl.exe (nt + 0x7F1C0)

  I have this problem since April, 2012

  HP support suggested that I should reinstall windows 7. I did some time at the beginning of August, but the problem persists.
  Help, please! Otherwise, I'll keep change the OS with a Microsoft OS No.
  Here are the dumps:
  (Local) information system
  computer name: RADU-PC
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i5 CPU M 520 @ 2.40 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4145868800 total
  VM: 2147352576, free: 1943330816

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Sat 29-Sep-12 12:56:36 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092912-34632-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003344E30, 0xFFFFF8800AEE8C70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sat 29-Sep-12 12:56:36 GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: bcm42rly.sys (BCM42RLY + 0 x 1280)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003344E30, 0xFFFFF8800AEE8C70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\drivers\bcm42rly.sys
  product: Broadcom iLine10 (TM) PCI network card
  company: Broadcom Corporation
  Description: Broadcom iLine10 (TM) PCI network adapter Proxy Protocol Driver
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: bcm42rly.sys (Broadcom iLine10 (TM) PCI network adapter Proxy Protocol Driver, Broadcom Corporation).
  Google search: bcm42rly.sys Broadcom Corporation SYSTEM_SERVICE_EXCEPTION

  Sat 29-Sep-12 12:47:59 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092912-34772-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003347E30, 0xFFFFF8800BCDCC70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &

  
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sat 29-Sep-12 12:39:07 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092912-35552-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000333CE30, 0xFFFFF88008D9CC70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Fri 28-Sept-12 07:30:24 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092812-35630-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003389E30, 0xFFFFF8800C0C5C70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Fri 28-Sept-12 07:20:56 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092812-58531-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003349E30, 0xFFFFF8800ACA9C70, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Play 27 Sept - 12 22:01:30 GMT your computer crashed
  crash dump file: C:\Windows\Minidump\092712-21606-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x1A (0xFFFFFA8000532F50, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Play 27 Sept - 12 09:26:28 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092712-30108-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x19 (0 x 22, 0 x 20000000000000, 0x0, 0x0)
  Error: BAD_POOL_HEADER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a pool header is corrupt.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The sea 26-Sept-12 07:12:30 GMT your computer crashed
  crash dump file: C:\Windows\Minidump\092612-19734-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x5A88)
  Verification of error code: 0 x 24 (0xFFFFF8800996BAE8, 0xFFFFF8800996B340, 0x1904FB, 0xFFFFF88001231A74)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Mar 25 - Sep - 12 20:55:48 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092612-22354-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7F1C0)
  Bugcheck code: 0x7A (0xFFFFFFFFC0000005, 0xFFFFFA8004646060, 0x1, 0xFFFFF680000B1000)
  Error: KERNEL_DATA_INPAGE_ERROR
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  The game 20-Sept-12 15:08:27 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092012-53929-01.dmp
  This was probably caused by the following module: win32k.sys (win32k + 0xC6A12)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF96000116A12, 0xFFFFF8800AC5B130, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\win32k.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Multi-User Win32 Driver
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Wednesday, August 7, 12 10:29:53 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\080712-41917-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x71F00)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF8000311445B, 0xFFFFF8A00B2DF000, 0 x 2)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, August 7, 12 10:08:21 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\080712-53305-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x1A50F3)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80002DBB0F3, 0xFFFFF880031A18B8, 0xFFFFF880031A1110)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• Different random BSOD, ntoskrnl.exe

  Hello

  I am getting random BSOD in ntoskrnl.exe + 75c00
  Can occur at any time and not necessarily in charge. I tried testing my ram, hard drives to find errors & ran sfc/scannow without error.
  I downloaded the minidumps on skydrive @ https://skydrive.live.com/#cid=539E2424E35481DA&id=539E2424E35481DA%21105
  A big thank you to all those who can help.

  Brett

  Two different causes.  First and foremost your Kaspersky.  I would like to delete and replace it with MSE

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

  Second is related to keyscrambler.sys KeyScrambler keyboard driver.  I remove if not required or update to the latest if it is.

• Windows 8 unexpected Kernel Mode trap BSOD (ntoskrnl.exe)

  Hello, I got the blue screen that gives me the error code: UNEXPECTED_KERNEL_MODE_TRAP (ntoskrnl.exe). I have had this problem since I got my computer, but it happens that all the other day. I tested my RAM with memtest and everything was good. I also use on all drivers updated. I recently installed "WhoCrashed" hoping to get more information as to what was causing this error. Here's the report;

  Thursday, June 26, 2014 6:31:37 PM GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\062614-28703-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x153FA0)
  Bugcheck code: 0x7F (0 x 8, 0xFFFFF802935ABE70, 0xFFFFF80293592FF0, 0xFFFFF80291C5AB6E)
  Error: UNEXPECTED_KERNEL_MODE_TRAP
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Any help will be much appreciated.

  Thank you

  Ryan

  Ryan

  The DMP was inconclusive pointing to memory.  My gut says it's Symantec.  I would like to do two things.  Run the driver verifier and remove Symantec and use the built in Defender.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Windows 7 BSOD ntoskrnl.exe question

  Hello.  I'm having the same problem as the next person - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/ntoskrnlexe-1040b-e58d2-6d5be/ea3a3e93-69bd-47c7-9f31-ddb723120912.  I ran Driver Verifier and then encountered the problem of not being able to access my laptop normally.  I disabled the driver verifier now.

  I redid my laptop about 3 times in the hope of solving my BSOD problem, but it is ongoing.

  Any help is appreciated.

  David Martinez

  THE

  They are related to your video driver.  I would like to begin by updating to the latest driver that yours is ~ 1 year.

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\052814-20592-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0xfffff800'02e63000 PsLoadedModuleList = 0xfffff800'030 was 6890
  The debugging session: 14:44:02.483 Wed 28 may 2014 (UTC - 04:00)
  System Uptime: 0 days 0:02:46.482
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..................................................
  Loading user symbols
  Loading unloaded module list
  ....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck C4, {c0, fffffa800a546340, f6, fffff8800f2b9879}

  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a 879)

  Follow-up: MachineOwner
  ---------

  2: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
  A device driver attempting to corrupt the system has taken.  It comes
  because the driver was specified in the registry as being suspect (by the)
  Administrator) and the kernel has allowed substantial control of this driver.
  If the pilot attempts to corrupt the system, looking for bugs, 0xC4, 0xC1, and 0xA
  Be one of the most commonly seen crashes.
  Arguments:
  Arg1: 00000000000000f6, handle user SEO as the core.
  Arg2: 00000000000000c 0, the value of Handle referenced.
  Arg3: fffffa800a546340, address of the current process.
  Arg4: fffff8800f2b9879, address inside the pilot making the incorrect reference.

  Debugging information:
  ------------------

  BUGCHECK_STR: 0xc4_f6

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  Nom_processus: rundll32.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff800033654ec to fffff80002ed8bc0

  STACK_TEXT:
  "" fffff880 ' 0 c 315308 fffff800 ' 033654ec: 00000000 ' 000000 c 4 00000000' 000000f6 00000000'000000 c 0 fffffa80 ' a 0, 546340: nt! KeBugCheckEx
  "" fffff880 ' 0 c 315310 fffff800 ' 0337abf4: 00000000 ' 000000 c 0 fffffa80 ' 0a 546340 00000000'00000004 fffff880'0 c 317000: nt! VerifierBugCheckIfAppropriate + 0x3c
  fffff880 ' 0 c 315350 fffff800' 03132890: fffff8a0 '000016-0 fffff880' 0c3155a0 fffff880 '0 c 315700 fffff880' 0c 315930: nt! VfCheckUserHandle + 0x1b4
  "fffff880 ' 0 c 315430 fffff800 ' 031a95b5: 00000000 '00000000 fffff880' 00000001 fffffa80 '06067f30 fffff8a0' 05c08a00: nt! : NNGAKEGL: 'string' + 0x2027e
  "fffff880 ' 0 c 315500 fffff800 ' 02ed7e53: fffffa80 '0aa1e060 fffff880' 0c3158b8 00000000'00000002 00000000'00000000: nt! NtQueryValueKey + 0 x 115
  "" fffff880 ' 0 c 315690 fffff800 ' 02ed4410: fffff800 ' 03369 d 96 fffff880 ' 0f2b9879 fffff880 '0 c 315930 fffff880' 0c 315928: nt! KiSystemServiceCopyEnd + 0x13
  fffff880 '0 c 315898 fffff800' 03369d 96: fffff880 ' 0f2b9879 fffff880 '0 c 315930 fffff880' 0c 315928 fffff800 ' 02ed4410: nt! KiServiceLinkage
  "fffff880 '0c3158a0 fffff880' 0f2b9879: fffff880 ' 0c3168ca fffff880 ' 0 c 315970 fffff880 ' 0c3168b8 fffffa80 ' 0591ff18: nt! VfZwQueryValueKey + 0 x 76
  fffff880 '0c3158f0 fffff880' 0c3168ca: fffff880' 0591ff18 fffff880 '0c3168b8 fffffa80' 0 c 315970 00000000 00000000': nvlddmkm + 0x9a879
  fffff880'0c3158f8 fffff880'0 c 315970: fffff880 '0c3168b8 fffffa80' 0591ff18 00000000 00000000' fffff880 0'c 315920: 0xfffff880'0c3168ca
  "fffff880 ' 0 c 315900 fffff880 ' 0c3168b8: fffffa80'0591ff18 00000000 00000000' fffff880 ' 0 c 315920 fffff980' 00000000: 0xfffff880'0 c 315970
  "fffff880 ' 0 c 315908 fffffa80 ' 0591ff18: 00000000 '00000000 '0c 315920 fffff980'00000000 00000000 fffff880' 000000 c 0: 0xfffff880'0c3168b8
  fffff880'0 c 315910 00000000 00000000': fffff880 '0 c 315920 fffff980' c 0 00000000 00000000'000000 ' 00280026 fffffa80: 0xfffffa80'0591ff18

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 9 has 879
  fffff880'0f2b9879 3d340000c0 cmp eax, 0C0000034h

  SYMBOL_STACK_INDEX: 8

  SYMBOL_NAME: nvlddmkm + 9 has 879

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5280da75

  FAILURE_BUCKET_ID: X64_0xc4_f6_nvlddmkm + 9 has 879

  BUCKET_ID: X64_0xc4_f6_nvlddmkm + 9 has 879

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:x64_0xc4_f6_nvlddmkm + 9 has 879

  FAILURE_ID_HASH: {0c031110-986a-b405-c565-3ead8c9b6e45}

  Follow-up: MachineOwner
  ---------

• BSOD - ntoskrnl.exe Critical_process_died 0x000000ef

  Got BSOD problems on windows 2012 R2 server, Viewer bliuescreen points to critical_process_dies - ntpskrnl.exe

  DMP file is linked here https://onedrive.live.com/redir?resid=CE9C8B0A89BD1546! 111 & authkey =! ABWSymb0WgE6tJA & ithint = the file % 2cdmp

  Please notify

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  2-Memtest. (You can learn more about running memtest here)

• My computer will not start - ntoskrnl.exe is missing

  Original title: my computer does not start upp

  my desktop does not load upward. I turned on and the following message appears.

  Windows didn't start because the following file is missing

  corrupted:

  Windows root>\system32\ntoskrnl.exe.

  Re - install a copy of the above file.

  is there something I can do?

  I don't have the boot disks.

  There were no power failure, etc.?

  The system is equipped with a CD/DVD player?

  I suspect that AVG has quarantined (effectively deleted) your way of thinking of ntoskrnl.exe file the file has been afflicted (it's perhaps), but there are copies on your system in other places, so you can simply replace the missing file.

  I would normally say that make you a XP Recovery Console bootable CD that you can create (no XP media required), but since you have XP Home Edition, which can frustrate you if you do not know the XP administrator password.  We can do the part later because it would be a good CD to have.

  Make a Hiren boot CD, boot your system on this CD and find your XP installation boot drive for a copy of ntoskrnl.exe and copy / paste the file into the c:\windows\system32 folder where it belongs.

  Places to find backups of critical files on the XP system are:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  Answered in the affirmative if invited to replace the existing file.

  If that's all you need to do to get there, you should consider broadening your horizons beyond AVG antivirus antimalware if you do not have this or similar problems.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.org/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little difficult to see and find, for some reason, so here are some ideas (they seem to change around for a reason, but that might just me my interpretation).  If you can't understand it, let me know so that I can update my copy/paste route.

  On the page for the version the most recent are information pages on what has changed in the latest version.  Look to the bottom of the page and you will be on page 1 of a number of pages (1 of 2 of 9, 9, 9, 3)...  The link to download the ZIP file is on the last page that is now for version 12, page 9 (or click on the end button).

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.

  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• DRIVER_POWER_STATE_FAILURE - 0x0000009f - ntoskrnl.exe

  I am facing to the BSOD a couple times a day. Each time the blue screen appears the laptop shows "DRIVER_POWER_STATE_FAILURE" then restarts again, once rebooted everything looks normal as usual.
  The system is Windows 8, X 64. The properties of the dmp is illustrated below:
  Chain: DRIVER_POWER_STATE_FAILURE checking bug
  The bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'04df9880
  Parameter 3: fffff803'fc5d2b40
  Parameter 4: fffffa80'05ad4290
  Plant address: ntoskrnl.exe + 5 has 440
  And my minidump link is
  https://SkyDrive.live.com/redir?RESID=F8ACA593B484724A! 1437 & authkey =! AI3q_oKn6TnvVOQ

  Hello

  The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:

  > [16, 2] e1 0 fffffa8006d36040 fffff803fd551830-fffffa800a43e690 00000000 success error cancel pending
  \Driver\nvlddmkm nt! PopRequestCompletion
  
  nvlddmkm nvlddmkm.sys = which is the video driver nVidia.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  Kind regards

  Patrick

• USB X121e failure after hibernation, stop along with BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe

  Hello. This is a brand new X121e. The half of the time when resume after hibernation, USB devices are not recognized, Device Manager freezes on the analysis of the changes of material and then stop the system or another attempt to Hibernate (a duration of 10 minutes give or take) it BSOD

  (DRIVER_POWER_STATE_FAILURE, * STOP: 0x1000009f (0 x 0xfffffa80030e6040, 0 x 0000000000000004, 0000000000000258, 0xfffff800049343d0) * ntoskrnl.exe - address 0xfffff80002e954da base at 0xfffff80002e16000 DateStamp 0x4e02aaa3).

  The last time she due to same corruption to my work (which was open during the crash) which chkdsk fixed only partially. In addition, some programs back on their default settings for some reason any.

  Played around with the drivers, has rejected the deactivation of USB devices, deleted some software, the Lenovo Power Manager, lost count of what I've done so far and how many days devoted to the research on the forums. Any help, please?

  Thanks for the help, guys. Solved by getting my own DVD Win 7, done the clean install without tons of bloatware Lenovo. So far so good.

• Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040

  Hello world

  I had reinstall Windows 8 last month cause too many errors with the Windows 8 and I had still BOSD arrives with a new installation of Windows 8.

  The last that I have no will is this one:

  KERNEL_DATA_INPAGE_ERROR

  Ntoskrnl.exe + 7 has 040

  We arrive in surfing on the web and burning with IMGBURN. Many Disconnections occur when you use the dvd burner.

  The other at the moment that I solved is "atikmpag.sys" I read on the net that I need to update the file from a download of catalyst frensh.

  Here all DUMP files and the news of the computer:

  All files: https://skydrive.live.com/redir?resid=10F449F32E80D9B2! 390

  Thank you!

  8ternity

  They were related to the following

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Is usually caused by
  a bad block in the disk controller or paging file error.

  My gut feeling is that it is one of these drivers or your moy.  I would like to update the drivers and replace AVG with the built-in Defender

  000 fcl 26/09/2008 09:11:22
  ksaud.sys 2010-07-14 06:12:54
  ntk_PowerDVD_64.sys 03/08/2010 05:04:12
  PxHlpa64.sys 2011-10-17 10:29:34
  amdsbs.sys 21/02/2012 14:15:43

  AVG can be a cause of BSOD.

  http://www.Avg.com/us-en/utilities

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• BSOD on Windows 8 due to ntoskrnl.exe, DRIVER_POWER_STATE_FAILURE

  Greetings,

  My wife's computer has worked all fine until today where it restarted just randomly while it was idle, and then he did a check-up system and then it started to a black screen where nothing happened. My wife used the option Windows refresh to reset the drivers and all and then it worked fine again. After a short time however she started having a BSOD every 15 to 30 minutes or more.

  

  I used a program called Whocrashed to check dump files and it highlights the ntoskrnl.exe as guilty as possible or from what I understand, it could refer to a driver that works badly, but we know that one.
  Here is the link to the dump files:
  https://drive.Google.com/folderview?ID=0B2U-GIArNJ3YQ2p4T3Bhbkp4Sk0&USP=sharing
  If someone has an idea or can help us out, it would be greatly appreciated.
  Have a great day!

  TQ

  These have been associated with iaStorV.sys Matrix Storage Manager driver - ia32 of Intel Corporation.

  I would like to re - install the latest driver available.  Yours is 2 years and more

• BSOD caused by ntoskrnl.exe - bug DRIVER_POWER_STATE_FAILURE

  Hi all

  I'd appreciate help with my laptop problems I don't know neither the cause nor the solution...

  For several months, my laptop refuses to close directly. I explain: when I want to stop it, any reboot my laptop and I have to stop him again so he can actually stopped. In addition, at each attempt to stop / restart, I have this incredible Blue Screen of Death for 15 to 20 minutes, then my laptop actually restarts. Once it has restarted, it works normally for 3 minutes and then freezes for a duratation ranging from 5 min to 40 min...

  In addition, since the beginning of these problems, my laptop detects no USB devices (mouse, external driver...)...

  Please help me, this situation is driving me crazy...

  My laptop is an Asus ux32v and runs on 64-bit processor - i5 3317U and Windows 8 (if it helps).

  Here is the link to my minidump files:

  https://www.dropbox.com/sh/ix3bf3v7aog2xz5/AAAcgX3yNBDWVAj5JXs9JNzSa?DL=0

  I tried to open these files with software like BlueScreenView but couldn't do much about it. What I realized is that it was caused by ntoskrnl.exe.

  Thank you in advance for your help!

  MS

  It is possible because you do not remove it completely.  He was always loaded into the current DMP file

  You do not update to win 8.1.  I'll wait until you do.

• BSOD while browsing with Chrome - Crash address ntoskrnl.exe + 5 has 440

  Hello, everyone. My laptop Dell Inspiron 1425, and the operating system is Windows 8 64-bit.

  These two days I get a blue screen while browsing with Chrome. So far, it's happened three times. Minidump files, we can see that the drivers that caused them are different, but their address of accident are the same: ntoskrnl.exe + 5 has 440. And each one happened when I was browsing with Chrome, I think they are relevant. Here's my Minidump files:
  https://SkyDrive.live.com/redir?RESID=77106B4AC1BE0CA8! 10830

  Thank you for your help :)

  Hello

  We have two bugs attached landfills here:

  DPC_WATCHDOG_VIOLATION (133)

  Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above. The value of parameter 1 indicates whether one single DPC exceeded a timeout, or if the system is cumulatively spent a long period of time IRQL DISPATCH_LEVEL or higher.

  I notice you have installed Norton. I will recommend to temporary troubleshooting purposes remove you Norton and replace it with built-in Windows Defender from Windows 8.

  Norton removal tool - ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  If the removal and replacement of Norton do not help, the second error checking is:

  VIDEO_TDR_FAILURE (116)

  The basic definition of a bugcheck 0 x 116 is:

  There may be a bug in the video driver or video material.

  So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

  Timeout detection:

  Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
  To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

  Preparation for recovery:

  The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

  Recovery of funds:

  The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

  Article here.

  That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

  The following hardware problems may cause a TDR event:

  1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

  2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

  GPU tests: Furmark

  RAM test: Memtest86 +.

  3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

  HARD drive Diagnostics: http://www.carrona.org/hddiag.html

  To reset your swap file, follow these steps:

  (a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

  -Then click on the Advanced tab.
  - then the Performance Settings button.
  - then on the tab advanced following.
  -and then click the virtual memory button.

  (b) in this window, note the current settings of your swap file (so you can restore them later).

  -Then click on the option button "No paging file", and
  - Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
  -Click OK to exit the dialog boxes.

  (c) restarted (this will remove the file from your system)

  ((d) then go back following the directions in step one) and re-enter the settings that you noted in step

  (b) follow the steps along the (and including) the reset.

  (e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

  Run the System File Checker:

  SFC. EXE/SCANNOW

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

  In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

  Let the program run and after return what he says when it's done.

  -Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

  -GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

  The following software issues can cause a TDR event:

  -Incompatible drivers of any kind (two GPU, sound, etc)

  -Messy registry / corrupted

  -DirectX bad files (uninstall and reinstall DirectX)

  -bad system files (System File Checker - has been run on it)

  -Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

  Kind regards

  Patrick