Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040

Similar Questions

• BSOD while browsing with Chrome - Crash address ntoskrnl.exe + 5 has 440

  Hello, everyone. My laptop Dell Inspiron 1425, and the operating system is Windows 8 64-bit.

  These two days I get a blue screen while browsing with Chrome. So far, it's happened three times. Minidump files, we can see that the drivers that caused them are different, but their address of accident are the same: ntoskrnl.exe + 5 has 440. And each one happened when I was browsing with Chrome, I think they are relevant. Here's my Minidump files:
  https://SkyDrive.live.com/redir?RESID=77106B4AC1BE0CA8! 10830

  Thank you for your help :)

  Hello

  We have two bugs attached landfills here:

  DPC_WATCHDOG_VIOLATION (133)

  Bug DPC_WATCHDOG_VIOLATION control has a value of 0 x 00000133. This bug check indicates that the watchdog DPC executed, either because it has detected a call single lengthy proceedings deferred (DPC), the system spent an extended time at a level (IRQL) IRQ to DISPATCH_LEVEL or above. The value of parameter 1 indicates whether one single DPC exceeded a timeout, or if the system is cumulatively spent a long period of time IRQL DISPATCH_LEVEL or higher.

  I notice you have installed Norton. I will recommend to temporary troubleshooting purposes remove you Norton and replace it with built-in Windows Defender from Windows 8.

  Norton removal tool - ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  If the removal and replacement of Norton do not help, the second error checking is:

  VIDEO_TDR_FAILURE (116)

  The basic definition of a bugcheck 0 x 116 is:

  There may be a bug in the video driver or video material.

  So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

  Timeout detection:

  Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
  To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

  Preparation for recovery:

  The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

  Recovery of funds:

  The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

  Article here.

  That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

  The following hardware problems may cause a TDR event:

  1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

  2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

  GPU tests: Furmark

  RAM test: Memtest86 +.

  3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

  HARD drive Diagnostics: http://www.carrona.org/hddiag.html

  To reset your swap file, follow these steps:

  (a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

  -Then click on the Advanced tab.
  - then the Performance Settings button.
  - then on the tab advanced following.
  -and then click the virtual memory button.

  (b) in this window, note the current settings of your swap file (so you can restore them later).

  -Then click on the option button "No paging file", and
  - Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
  -Click OK to exit the dialog boxes.

  (c) restarted (this will remove the file from your system)

  ((d) then go back following the directions in step one) and re-enter the settings that you noted in step

  (b) follow the steps along the (and including) the reset.

  (e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

  Run the System File Checker:

  SFC. EXE/SCANNOW

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

  In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

  Let the program run and after return what he says when it's done.

  -Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

  -GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

  The following software issues can cause a TDR event:

  -Incompatible drivers of any kind (two GPU, sound, etc)

  -Messy registry / corrupted

  -DirectX bad files (uninstall and reinstall DirectX)

  -bad system files (System File Checker - has been run on it)

  -Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

  Kind regards

  Patrick

• Windows 8 BSOD caused by ntoskrnl.exe

  Hello.

  I get a lot of the dreaded BSOD lately.
  From the beginning I thought that it's nvidia drivers. Update of those fixed everything except a BSOD I get.
  Now I get the same BSOD, and it is caused by ntoskrnl.exe and playback memory problems.
  I've been all around you are looking for assistance and use of memtest86 without result.
  The Msinfo32 and .dmp files are located here: DMP.zip 
  Anyone have any idea what may be causing this?
  I couldn't find the RAM that I use in the compatibility table for the motherboard. So that's what I think may cause the problem.
  Any help is greatly appreciated.
  Kind regards
  Arve

  Hi Arve,

  All attached files of the DMP are the bug check IRQL_NOT_LESS_OR_EQUAL (a) .

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If we look at the call stack:
  
  STACK_TEXT:
  "fffff880 '0335caf0 fffff880' 06a4d817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 12fdbe10 00000005' 00001f80: nt! KeSetEvent + 0x2ad
  fffff880 '0335cb60 00000000 fffff880': fffffa80'00000008 fffffa80 '12fdbe10 00000005' 00001f80 fffffa80' 1458a6a0: MBfilt64+ 0 x 1817
  fffff880'0335cb68 fffffa80'00000008: fffffa80 '12fdbe10 00000005' 00001f80 fffffa80 '1458a6a0 fffff800' 9bc62d4c: 00000000' 0xfffff880
  fffff880 '0335cb70 fffffa80' 12fdbe10: 00000005' 00001f80 fffffa80'1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0: 0xfffffa80'00000008
  fffff880 '0335cb78 00000005' 00001f80: fffffa80 ' 1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0 fffffa80 ' 1458a6a0: 0xfffffa80'12fdbe10
  fffff880 '0335cb80 fffffa80' 1458a6a0: fffff800 ' 9bc62d4c fffffa80 '1458a6a0 fffffa80' 1458a6a0 fffffa80 ' 12fdbe10: 0 x 5 ' 00001f80
  fffff880 '0335cb88 fffff800' 9bc62d4c: fffffa80 ' 1458a6a0 fffffa80 '1458a6a0 fffffa80' 12fdbe10 fffff880 ' 02fc9f00: 0xfffffa80'1458a6a0
  fffff880 '0335cb90 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! ViPendingCompleteAfterWait + 0xc4

  Cannot load the image MBfilt64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  ^^
  Driver Realtek HiDefinition Audio (referred to as Creative Audio Driver file).

  If we run a lmvm on your:

  4: kd > lmvm MBfilt64
  start end module name
  fffff880 '06a4c000 fffff880' 06a5a000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Thu Aug 30 23:40:32 2009 (4A7267B0)

  ^^, Yours is dated 2009 ~ The most recent is AFAIK as early as September 2013, via - Realtek site

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  To update this driver as soon as POSSIBLE.

  -----------------------------------------------------------

  In addition, to provide peace of mind regarding your request of RAM. If you receive a card mother and they have a list of the RAM compatible in the manual, etc., this is called a QVL (qualified suppliers list). It is simply a list of RAM which has been tested internally and is PROVING to be quite compatible 100%. If the RAM is not on the list, it is not by all means, implies that the RAM will be inconsistent and cause problems. Actually today is very rare. Your RAM doesn't seem to be the issue at all in these accidents.

  Kind regards

  Patrick

• BSOD on Windows 8 due to ntoskrnl.exe, DRIVER_POWER_STATE_FAILURE

  Greetings,

  My wife's computer has worked all fine until today where it restarted just randomly while it was idle, and then he did a check-up system and then it started to a black screen where nothing happened. My wife used the option Windows refresh to reset the drivers and all and then it worked fine again. After a short time however she started having a BSOD every 15 to 30 minutes or more.

  

  I used a program called Whocrashed to check dump files and it highlights the ntoskrnl.exe as guilty as possible or from what I understand, it could refer to a driver that works badly, but we know that one.
  Here is the link to the dump files:
  https://drive.Google.com/folderview?ID=0B2U-GIArNJ3YQ2p4T3Bhbkp4Sk0&USP=sharing
  If someone has an idea or can help us out, it would be greatly appreciated.
  Have a great day!

  TQ

  These have been associated with iaStorV.sys Matrix Storage Manager driver - ia32 of Intel Corporation.

  I would like to re - install the latest driver available.  Yours is 2 years and more

• Receive lots of BSOD due to ntoskrnl.exe, they stopped, but started again after a month

  I get lots of BSOD. I installed "WhoCrashed" and analyze the dump files. Here's what he said:

  Saturday, October 3, 14 17:29:30 GMT PM your computer crashed
  crash dump file: C:\Windows\Minidump\031014-15147-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
  Bugcheck code: 0x4E (0 x 0x2007E, 0 x 2, 0 20075, 99)
  Error: PFN_LIST_CORRUPT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the page frame number (PFN) list is corrupted.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I have this problem for a long time. I've updated the drivers, windows updates, no effect. But, for some reason, he did not seem since February. But Monday, I used MiniCygwin_GOptimize_v1.34.02 to compress files apk android. He uses a lot of CPU. And after that the BSOD began to reappear. I downloaded the Minidump file and Information System if someone wants to check.

  Let me know the reason for these BSOD and how can I solve this problem.

  Hello

  We have many bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {5003, fffff780c0000000, 6933, 64ba0002d266}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is probably a hardware error.

  We also have another 1st parameter:

  Error checking 1 a, {fffff6800005cf40, eab00001beb34867,403, fffff6fc00df59a0}

  - Parameter 1 of the bug check is 403 which indicates the page table and NFPs are out of sync. It is also probably a clerical error.

  ^^ Pointed out that both of the above can still be caused by a driver causing corruption, but it is generally unlikely.

  And another...

  Error checking 1A, {41284, 159a0e001, 104 d 57, fffff70001080000}

  -1 setting of the bug check is 41284 indicating a PTE or the fixed work list is corrupted.

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffff8a00b91df40, fffff8a00b91e020, 50e040c}

  6: kd >! pool fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown
  fffff8a00b91d000 size: 4 d 0 previous size: 0 Ntff (allocated)
  fffff8a00b91d4d0 size: 30 size: 4 d 0 PfFK (allocated)
  fffff8a00b91d500 size: 30 size: 30 PfFK (allocated)
  fffff8a00b91d530 size: 10 previous size: 30 (free) NtfE
  fffff8a00b91d540 size: 30 size: 10 Ntf0 (allocated)
  fffff8a00b91d570 size: size previous 10:30 (free) Nbmc
  fffff8a00b91d580 size: 40 previous size: 10 DxgK (allocated)
  fffff8a00b91d5c0 size: c0 size previous: AfdX (protected) process (allocated) 40: fffffa801098c7f0
  fffff8a00b91d680 size: 170 previous size: c0 MPsc (allocated)
  fffff8a00b91d7f0 size: size previous c0: 170 FIcs (allocated)
  fffff8a00b91d8b0 size: 40 size: c0 (allocated) NtFs
  fffff8a00b91d8f0 size: 30 size: 40 (allocated) PfFK
  fffff8a00b91d920 size: 30 size: 30 Ntf0 (allocated)
  fffff8a00b91d950 size: 150 size: 30 FMfn (allocated)
  fffff8a00b91daa0 size: size 160: 150 FMfn (allocated)
  fffff8a00b91dc00 size: 40 size: 160 (allocated) MmSm
  fffff8a00b91dc40 size: c0 size previous: 40 FIcs (allocated)
  fffff8a00b91dd00 size: 10 size: c0 sect (free)
  fffff8a00b91dd10 size: 170 previous size: 10 MPsc (allocated)
  fffff8a00b91de80 size: size previous c0: 170 (allocated) NtFs
  * fffff8a00b91df40 size: size previous e0: c0 (free) * FIcs
          PoolTag FIcs: Context of FileInfo FS-Filter binary stream: fileinfo.sys

  ^^ Block of pool who looked in the page pool belongs to the context of FileInfo FS-Filter flow. This is related to the file system.

  6: kd >! poolval fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown

  Validation of the headers of pool the pool page: fffff8a00b91df40

  [Fffff8a00b91d000] page pool is __inVALID.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  2: kd > fffff960000a874f ln
  (fffff960'000 a 8720)   win32k! NextOwnedWindow + 0x2f |  (fffff960'000 a 8770) win32k! xxxRemoveDeleteMenuHelper

  ^^ The exception is produced in win32k! NextOwnedWindow.

  -----------------------

  Overall, this looks like the faulty RAM. It's not like there is a foul-smelling waters driver causing memory corruption here, but it is possible. The reason I mention this is because I see it in the crash dumps after dumping the! v

  OVERLAPPED_MODULE: Address overlap 'WinUsb' and 'ssudbus.sys'.

  ^^ WinUsb.sys - pilot class USB Windows system, it is a part of Windows. ssudbus.sys-

  SAMSUNG USB Composite Device Driver. Probably a part of Samsung Kies. Uninstall everything that you can find this topic.

  -----------------------

  Please run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• BSOD issue with ntoskrnl.exe

  Hello friends,

  IM currently having the BSOD "IRQL_NOT_LESS_OR_EQUAL" With Driver crash "ntoskrnl.exe" error

  Here's the minidump file.

  https://onedrive.live.com/redir?RESID=373FE6B42355D2CD! 1304 & authkey =! AMPX4Szxm7ffhyE & ithint = the file % 2cdmp

  Specifications of the computer:

  System manufacturer: BIOSTAR Group
  System model: TZ68K +.

  Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1

  Card name: NVIDIA GeForce GTX 560

  Processor: Intel Core i7 - 2600K CPU @ 3.40 GHz (8 CPUs), ~3.4GHz

  BIOS: BIOS Date: 15/12/11 18:26:05 worm: 04.06.04

  Very respectfully,.

  AJ

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• BSOD caused by ntoskrnl.exe - bug DRIVER_POWER_STATE_FAILURE

  Hi all

  I'd appreciate help with my laptop problems I don't know neither the cause nor the solution...

  For several months, my laptop refuses to close directly. I explain: when I want to stop it, any reboot my laptop and I have to stop him again so he can actually stopped. In addition, at each attempt to stop / restart, I have this incredible Blue Screen of Death for 15 to 20 minutes, then my laptop actually restarts. Once it has restarted, it works normally for 3 minutes and then freezes for a duratation ranging from 5 min to 40 min...

  In addition, since the beginning of these problems, my laptop detects no USB devices (mouse, external driver...)...

  Please help me, this situation is driving me crazy...

  My laptop is an Asus ux32v and runs on 64-bit processor - i5 3317U and Windows 8 (if it helps).

  Here is the link to my minidump files:

  https://www.dropbox.com/sh/ix3bf3v7aog2xz5/AAAcgX3yNBDWVAj5JXs9JNzSa?DL=0

  I tried to open these files with software like BlueScreenView but couldn't do much about it. What I realized is that it was caused by ntoskrnl.exe.

  Thank you in advance for your help!

  MS

  It is possible because you do not remove it completely.  He was always loaded into the current DMP file

  You do not update to win 8.1.  I'll wait until you do.

• BSOD - NETIO.sys, NTOSKRNL.exe - DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0x000000d1

  Hello
  I am experiencing BSOD. Bed "DRIVER_IRQL_NOT_LESS_OR_EQUAL" Stop error: 0x000000d1.
  Drivers show NETIO.sys and NTOSKRN.exe.
  I'm running Lenovo T540p Windows Version 6.1.7601 with the latest updates.
  Here is the link to the dump file.
  https://SkyDrive.live.com/?CID=0E6019D47C4472B6&ID=E6019D47C4472B6%21163
  A hotfix is available? Dump file, can you tell which driver is causing BSOD?
  Thanks in advance!

  Hello

  In addition to checking the filter driver Web FortiClient also check for update with your network
  drivers because there is often an interaction involved.

  Check with Lenovo support, their drivers and documentation online and ask in their forums
  on known problems. Update the network drivers.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 0x0000009f DRIVER_POWER_STATE_FAILURE ntoskrnl.exe blue screen error / ntoskrnl.exe + 5 has 220

  Need help... My ASUS N43SL got BSOD every time I try to Hibernate. (Windows Pro 8, update Windows 7 via Windows site)

  Stop and restart Mode did not.
  It comes to my minidump link... https://SkyDrive.live.com/redir?RESID=F266C2A31EC1D90D! 344

  The minidump file showed a DRIVER_POWER_STATE_FAILURE (9f) referencing the ndiswan.sys.

  Other users report similar errors and Connectify and Kaspersky installed for example here , the problem seems to be Connectify or Connectify clashing with Kaspersky.

  Try to uninstall Connectify and, if him persists error uninstall Kaspersky and use alternative security such as firewall and antivirus integrated Windows 8 (Windows Defender) software.

  Also, the driver verifier seems to be activated which should not be enabled under normal circumstances also to 'turn off' the driver verifier:

  Start > type verifier.exe and press 'Enter' on the keyboard > clear the existing settings > finish > click 'Yes' to the message to delete the settings and exit the program

• BSOD caused by ntoskrnl.exe (and maybe hal.exe?)

  Hi all

  I don't have much experience in debugging BSOD minidumps so I turn for help. Attached all my files dump in time past. All caused my computer to turn off instantly, of course, sometimes it turns even off exactly when windows loads. From the little I know, I think maybe it's a hardware failure (0 x 124), but I'm not sure. Any help would be greatly appreciated.

  Here is the download link: MiniDump

  Thank you very much for any help!

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  drivers chipset on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• XP reboot, trouble with windows system root 32/ntoskrnl.exe

  How do I reboot XP, when my keyboard seems to be does not work either. Replace the keyboard? Is a a working XP wireless work?

  Well, I looked up a1410a at hp, but they only had the a1410n model that I could see.  but the last letter in the model number may be due to only a minor difference between models.

  in any case, it is regrettable that hp.com makes it very difficult to find answers and you were essentially limited to the use of their system recovery / factory restore procedure.  However, this is not what need you.

  Instead, here is your bios access information:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07110&tmp_task=useCategory&LC=en&DLC=en&cc=us&lang=en&product=1841799

  again, once inside the bios menu, see if the keyboard helps you maneuver autour. try changing the date and time.   If you have some basic features of the kb, it is to say the arrow keys, number and letter work, then your kb is basically ok.

  to exit the bios, you can find options to close or end the session of the bios.  Choose the one that says, close and ignore the changes.  the bios will then close with all stats unchanged original.

  with respect to the model of your keyboard, it seems that you have a version of media multi with a ps2.

  the improvements offered by this keyboard requires a specialized hardware hp keyboard driver.  but this pilot and improvements are used by windows, when it runs.

  the pilot and the improvements are not needed during the boot process.

  either incidentally, adapter, to which I referred is a simple adapter that connects to the ps2 connector and converts it into a USB port.  It is relatively cheap and can be purchased at computer stores.

  http://www.bing.com/search?q=PS2%20To%20usb%20keyboard%20adapter&PQ=PS2%20To%20usb&SP=3&QS=as&SK=AS2&SC=8-10&form=BB07SS&PC=BB07

  However, instead of buying a plug adapter a specialty multi media keyboard, my suggestion is to buy a cheap keyboard plain / ordinary instead.

  a regular keyboard to replace your multi media Ko if it is defective.  the regular keyboard can also be used on other computers and laptops as a backup.

  Remember that ps2 keyboards and others comes with usb Sockets.   for now, you must Ko ps2 for use on your CV and if the box is delivered with a ps2 usb adapter, then, it is an added bonus.

• BSOD ntoskrnl.exe + 72 0x0000009f DRIVER_POWER_STATE_FAILURE has 40

  I almost brand new HP ProBOOK 450 G2 with Windows 7 Enterprise, just noticed today the first Memory Dump, thought then to ask... like the laptop is under warranty... laptop computer is on battery power and the battery is dead so saw the light flashing 'orange' and he got the memory dump and he came down, the battery was finished It happened... but its still not the right way to go then... I have through the app "BlueScreenView" about something, but he could not say exactly... searched thing many error BSOD here in the office, but none had the same error, sharing so if someone is kind enough to help.

  Dump file 050415-21028 - 01.dmp
  Time of the accident 04/05/2015-11:01:32
  Bug Check String DRIVER_POWER_STATE_FAILURE
  Bug check code 0x0000009f
  Parameter 1 00000000'00000003
  Parameter 2 fffffa80'07f37a10
  Parameter 3 fffff800'048943 d 8
  Parameter 4 fffffa80'08da0010
  Caused by the driver Ntoskrnl.exe
  Caused by the address ntoskrnl.exe + 72 has 40

  DMP file: http://1drv.ms/1K9FKRC

  Thanks in advance

  ONE

  This phenomenon was related to rtlane.sys NDIS Driver of Realtek Semiconductor Corporation.  I remove the current driver and install the latest driver available.

• Serscan.sys ntoskrnl.exe BSOD

  I started having BSOD pointing to ntoskrnl.exe and serscan.sys. Before the accident, the system gets very insensitive. The Task Manager displays all the information Resource Monitor gets even worse. When I reboot I get BSOD. After a few resets the system up live. I scanned for malware and found nothing. Antivirus shows as well clean. HD Tune says Spin Retry count slightly exceeds threshold and an unknown attribute of a same drive on another more transferred sector Count. There is more than one drive, but HD Tune does not show health is probably that it is 2 TB. It would then be memory or maybe something else? BSOD SkyDrive here

  The accident was reported as being caused by DISK_HARDWARE_ERROR: a closer examination gives us a clue.

  Process of own fffffa800b83b380 Image: RapportService

  0: kd >! THREAD
  GetPointerFromAddress: unable to read from fffff800036ff000
  WIRE fffffa800a968640 Teb 13c8.1678 Cid: 00000000fff9e000 Win32Thread: 0000000000000000 PROCESSOR 0
  Borrow not identity
  GetUlongFromAddress: cannot read fffff8000363dbf0
  Owning process fffffa800b83b380 Image: RapportService
  Joint process s/o Image: n/a
  fffff78000000000: cannot get shared data
  Wait start TickCount 1985375

  You could do either of two things. Completely uninstall 'Trusteer report' and wait to see if the system crashes again, or you can force a crash by running the Driver Verifier, to help locate the faulty module, then post a link to the dump file here, resulting in the body of your next post.

  Driver Verifier - stalking a bad driver to behave.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-Update/Driver-Verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

• Ntoskrnl.exe BSOD at random

  I get a BSOD caused by ntoskrnl.exe or ntfs.sys, with a lot of different bugs 0x0f and 0x0A 0x01E. I used WhoCrashed to help me find what it was, but in no avai.

  Here at random, take a few minutes to a few hours.
  Here are the logs of WhoCrashed

  Thursday, November 10, 2011 2:48:45 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110911-26130-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x213D8)
  Verification of error code: 0 x 24 (0xFFFFF88009D8C348, 0xFFFFF88009D8BBB0, 0x1904FB, 0xFFFFF80002EE2EEA)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Thursday, November 10, 2011 2:48:45 AM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x213D8)
  Verification of error code: 0 x 24 (0xFFFFF88009D8C348, 0xFFFFF88009D8BBB0, 0x1904FB, 0xFFFFF80002EE2EEA)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Thursday, November 10, 2011 2:18:09 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110911-19515-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x212A3)
  Verification of error code: 0 x 24 (0xFFFFF88008DD4708, 0xFFFFF88008DD3F70, 0 x 190477, 0xFFFFF80002EA5C84)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Thursday, November 10, 2011 2:05:19 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110911-22682-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 70590)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, November 9, 2011 11:39:15 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110911-20638-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x705C0)
  Bugcheck code: 0xA (0xFFFFF880029ED988, 0xFFFFF80002D205F1, 0x2, 0x0)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, October 27, 2011 7:49:38 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110911-25162-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x705C0)
  Bugcheck code: 0xD1 (0xFFFFF8808327B1DA, 0xFFFFF880042A41EA, 0x2, 0 x 1)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, October 27, 2011 3:11:46 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102611-21106-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 70600)
  Bugcheck code: 0x3B (0xC0000005, 0x1, 0x0, 0xFFFFF88009B94300)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Let me know if I need to download the DPM

  Hello

  Doubt that its windows for millions would have the same questions.

  If you think that your Windows installation disc is damaged, try these as a test.

  This will give you a method to make and install from another disk as a test.

  Windows 7 Enterprise - 90 day trial
  http://TechNet.Microsoft.com/en-us/evalcenter/cc442495.aspx

  They will help make you the ERD that are bootable.

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ========================================

  These make it bootable Linux disks with many public services:

  Hiren Boot CD
  http://www.hirensbootcd.org/

  Rescue Kit Trinity
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  System Rescue CD
  http://www.SysRescCd.org/Main_Page

  Knoppix
  http://www.Knoppix.NET/

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• BSOD with ntoskrnl.exe (nt + 75 b 80)

  Hello

  Can someone help me with the question BSOD. This BSOD occur intermittently and usually the BSOD caused by ntoskrnl.exe (nt + 75 b 80).
  I have attached the minidump as well.
  Kindly help me to check it out.
  SkyDrive:
  https://SkyDrive.live.com/redir?RESID=2BB9014DF75DB8D6! 1454 & authkey =! AAoIhuMavrJPqbc&ithint=folder%2c.dmp

  Goh KS

  These were related to driver USB Camera 5U877.sys from Ricoh co., Ltd..  I would remove at least to test

  You have also a driver of 2005 that need to be updated or deleted called SSPORT.sys 2005-08-11 18:07:32 (related to the SSPORT.sys 32-bit Port claim Driver of Samsung Electronics.)