BSOD System_Service_Exception and Driver_Verifier_Detection on HP m9520f PC

Similar Questions

• BSOD System_Service_Exception using Firefox initiation a week ago. Fine with IE.

  With the help of HP Series 2000 laptop just bought in November 2012. Processor AMD Windows 8. I put online using Firefox for about 15 minutes and I get the BSOD System_Service_Exception and reboots the machine. I use IE, and it works very well. Use Firefox on this laptop since the beginning, has begun to malfunction in the last week or two. Looks like one of the update of Firefox is not agree with Windows 8. I can't provide troubleshooting information because Firefox will not open long enough.

  If you are under warranty, please call HP, but given that this issue is not related to Firefox, we suggest that you do a Google of your error message. Thank you.

• Error BSOD System_Service_Exception also the Memory_Management BSOD error

  Last year, I built a new computer to coincide with the launch of Windows 7.

  Specifications are the following:

  CPU: core intel i7 920

  RAM: Corsair Dominator TR3X6G1600C8D 3x2GB

  GPU: ATi 5850HD

  Mobo: Asus P6T SE

  OS: Windows 7 Home Premium 64-bit

  For a time, it worked fine, but I started to have problems of gel. They generally produce right after startup, the system could get the extent of loading Messenger, but shortly after, would freeze the mouse and the computer would be completely insensitive. After trying for a few months to get the system to work (and have a wave of 8 weeks where everything worked fine), as well as to test the RAM and even up the motherboard for test sending, I finally gave up and came back to 32-bit of Windows XP. I did it in March, and then until Sunday 24 the computer took place without a hitch. Not a single problem.

  24, I decided to give Windows 7 an another go, with a new drive, I created myself and my own key, as well as remove the Creative sound card, I had used, because a friend suggested that could be the problem.

  For a week the system went very well, however I got a blue screen error 31. Memory_Management. 0x000000001A

  When I restarted from this, the system told me I had 4 GB of RAM, instead of 6 GB. Again, I have played the game for a few hours with only a few hiccups of frame rate. After that I turned off, went out the ram, made sure they were dust, reinserted them and turned on, the system told me I had 6GB again. Just to be safe, I fell memory diagnostic tool Windows 7 #s from 04:30 until about 23:00 the next night. He managed 63 passes and did not find a single error. In the past when I received first freezes, I tested the RAM one by one using memtest86. I placed the RAM in DIMM1 and ran all night, each test would have about 25-30 full passages without errors, so naturally I who ruled out as a cause.

  However tonight, I got another BSOD, it was when the computer was simply idling with a few open programs, namely Firefox, Internet Explorer (maybe, I'm not sure) and Windows Live Messenger. System_Service_Exception. 0x000000003B.

  Reset, I have 4 GB of RAM instead of 6 again.

  I hope someone is able to offer any suggestions as to what I can do at this point. It sems very well as if it was a problem of RAM, but after numerous tests and find no errors in * any * point, I am at my wit's end.

  A failure of this function from NT kernel is linked memory:

  NT! MiPromoteNode + 21

  Nom_image: memory_corruption

  BiosVersion = 0608
  BiosReleaseDate = 11/11/2009
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = P6T SE

  Please make a update of the BIOS for this version:

  P6T SE 0808 BIOS

  http://www.ASUS.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD: System_Service_Exception (Netio.SYS)

  Hello

  I got the BSOD under the title of System_Service_Exception (Netio.SYS) random (but have already received twice in a week). Whenever I got the BSOD, I was using HBOGo in Google Chrome. The link to my DMP file is:

  https://onedrive.live.com/redir?RESID=2E18F33419B260FD! 1672 & authkey =! ACFZyuro0C41bLQ & ithint = % 2czip

  My specifications are

  Windows 8 x 64

  Lenovo Z50

  i5-4210U CPU @1.70 GHz

  6 GB OF RAM

  These were related to the pilot of firewall AVG avgwfpa.sys AVG Technologies.  Remove it and use the built in Defender in his place

• Satellite Pro U200: BSOD error and sudden shutdown problem

  I have been using Satellite Pro U 200 since July this year.
  I had a strange problem. The problem began in mid-October where my laptop appears a blue windows error screen and restart. When the system will re-start the screen would flicker start and the operating system would not initialize correctly.

  It would give all sorts of error messages. Even if I tried to install a new operating system at this time where he would give error with the disc saying some file is corrupted. If you leave the phone turned off, it would again work normally.
  The disc would normally work on other portable computers desktop computers.

  I sent it for repair and they changed the hard drive. But the problem has returned to a degree less after a week.
  He sent again and this time they changed the motherboard.
  But the problem is now back with the blue screen stop.

  It's a Toshiba U 200 1.66 GHz memory gigabyte hard drive.
  I bought the Canada and use it in England, there is therefore a Canadian power cable.
  I am using Windows XP Pro with Service Pack 2

  Any help will be appreciated!

  Is it possible that some application you use is responsible for this? If there is an error on the corrupted file, I'm a bit skeptical about a malfunction of the equipment.

  You did some hardware upgrades?
  Check Please also this interesting article on the BSOD http://articles.techrepublic.com.com/5100-10877-6053684.html

• Spectrum HP convertible x 360: blue spectrum HP x 360 13-4105dx MEMORY_MANAGEMENT BSOD screen and gauge battery only "calculation".

  I am Brazilian and acquired in the United States thanks to a friend, a spectrum of HP x 360 Convertible Notebooh - Win 10 - i7-6500u - 8 GB of RAM - 512 ssd
  
  He constantly showed an error on blue screen of death BSOD (Blue Screen Of Death) with the "MEMORY_MANAGEMENT" error
  
  However, other messages such as "PAGE_FAULT_IN_NONPAGED_AREA (Wdf01000.sys)" or "IRQL_NOT_LESS_OR_EQUAL" or "KERNEL_SECURITY_CHECK_FAILURE" are also presented at other times.
  
  Sometimes, after much searching on the forums, I've seen a lot of people complaining that the video driver was the cause of the problem.
  
  As I read on the forums, follow the instructions to update the BIOS to the latest version (F.35), then put to update the driver Intel(r) HD Graphics 520 to the latest version available on HP website (20.19.15.4360 from 21/12 / 2015).
  
  The mistakes continued. I abandon me when I noticed something new, be the subject of an investigation. After a long comment, I realized that when the laptop is powered energy he not crushed and does not give problems, he gave when the battery.
  
  When removing the power supply, after a short period, about 5 to 10 minutes, the mistakes began to appear, and then the question arises:
  
  -It would be the parameter in battery power settings that could be the cause of the error (like setting up optimization, performance, etc) or is it really problem in the battery causing the error?
  -Because the estimated Win10 battery life indicator has no estimate of consumption, keeping the status always "computation". This last fact strengthens the thesis that the problem is the battery.
  
  Before ask you, I used the HP Suport Assistent to the battery test and he informs that the battery is standard, which goes against my thesis which is the problem of power or the power configuration in a device driver (probably the driver Intel(r) HD Graphics 520). I did tests of memory and the SSD and quite normal.

  I decided to disable the battery driver in dispostivos Manager. Its name in dispostivos Manager is 'Control method battery Microsoft ACPI-Compatible'. To my surprise, Guess, the laptop did not, I'm still testing, but it doesn't seem that it was driver stack of conflict. The machine did not fall down, but bad disable the driver, it's that we lose track of how much time we have autonomy, but rather sacrifice the autonomy of the video driver (was palliative that he used to be able to work with the battery). Go figure... Wells is now to see if HP will solve this problem of incompatibility, because I found the potential conflict and now awaits the solution. Let's see what will give... all new review here.

  Solution to the problem on the link:
  
  http://h30487.www3.HP.com/T5/TELA-v%C3%ADdeo-e-GR%C3%A1ficos-para-notebooks/HP-spectre-x360-13-4105dx-TELA-Azul-BSOD-memory-management-e/m-p/634510

• BSOD shutdowns and flakey firewire port - help?

  Well I'm getting really frustrated on this laptop, it's almost 2 weeks
  and I already had 2 BSOD the strange accident where the mouse moves, but nothing
  Otherwise, around, it works so a forced reboot was necessary.
  Today, I got a BSOD everything I did was run a few the taskbar called untility
  physician network or something.
  error message:

  PAGE_FAULT_IN_NONPAGED_AREA (no address information)
  STOP: 0 X 00000000050

  someone suggested that I may have a memory problem or my file is corrupted.
  in any case here is a run down on what I installed that day with my laptop.
  -Installed all XP security updates and patches
  -Installed Firefox 1.0.1 (do not trust IE6.0 yet)
  -Iriver (my mp3 player) installed Download Manager
  -Installed winamp 2.0 and Creative Cam Notebook.
  I ran a chkdsk forced start and no problems found.
  Another thing I found interesting was almost every time my laptop BSOD I usually
  find a yellow marker on my net adapter 1394 (firewire port) in device mananger
  ("cannot start device") don't know if that is related or not. A restart seems
  turn off this yellow marker, but I am rather unhappy that BSOD is none what laugh.

  My laptop model is the Equium A60-181 (Intel P4 HT 3.2 Ghz 512 MB RAM)

  Anyone else had problems or similar recommendations?

  see you soon,

  Richard S.

  Hi Richard

  I understand that you that you are unhappy with it all the problems, but there may be many reasons for this. In my opinion this can happen because of some useless day or some drivers installed by third-party software that you have installed on your laptop.

  Please reinstall OS using the recovery CD. After firs start check in Device Manager if there is some hardware problem. If not you than trying to start the free Config (doctor of connectivity) and a few other tools Toshiba to check if everything is ok.

  If everything is ok try to install SP2 if you n t have on your machine (just SP2 and not separately updates and patches). I don't know, but some of the A60 are delivered with SP2.

  Install all your programs slowly and carefully follow what happened after each step you did.

• Error on blue screen (BSOD) during and after the installation of Windows 7

  I had to reinstall Windows 7 using the recovery partition. When installing I kept getting blue screen errors and even now I still get the BSOD a few minutes. I have no problem in safe mode.

  My laptop is a Satellite C650D - 12 c. I tried to update the BIOS, but I can't do it in safe mode. What should I do next?

  Saved on the HARD drive recovery image is tested so everything should be OK with recovery image installation.
  What you can try is to use the Microsoft installation disc to see if the same thing will happen again.

  If Yes, I'm afraid, you need professional help with this Portable Mr. probably guaranteed so the service guy should check this.

  You created the recovery DVDs?
  BTW: I think that the update of the BIOS is not solution. Recovery facility must operate with this original version of BIOS.

• "Satellite P300D-201: BSOD: irql_not_less_or_equal" and pointer reference

  The first few weeks, I got Windows 7 32 Bit on my Satellite Pro P300D 201, it worked fine. But suddenly, there was a blue screen with the label "reference_by_pointer" I've tried to stop as usual. I have not installed any new software a few days before (just a few updates "Windows Update"). Now this apears blue screen every time I try to stop. Hibernation and energy saving still work.

  But, sometimes when I connect my mobile phone "Sony Ericsson K800i" using the USB connection and the "Sony Ericsson PC Suite 6" it is "irql_not_less_or_equal" blue screen.»

  I don't know if theres something wrong with the RAM/working memory, but I can't think because this computer is brand new and it never fell down or something like that.

  I'm sorry for my bad English, I'm still learning.

  Hello

  Perhaps Windows isn't compatible with your software up-to-date and causing this BSOD. You should try to use the restore system to a previous state.

  Also have you updated the software for your mobile phone? Maybe it's not compatible with Windows 7's again. Visit the site of the factory for an update.
  I have the same phone but I m using MyPhoneExplorer which works quite well on Windows 7 but I m using the Bluetooth connection and not on the cord.

• BSOD constantly and no idea why.

  Okay so here is my question. I have a dv6 HP ENVY and I for about six months now. This problem happened since, but I'm finally fed up enough to do something.

  I do a lot of games on my computer, but I can't play for a short time before my computer BSOD. The problem is that I almost never get the same error twice. There's always a different error message.

  I have all my gear to update several times and I'm starting to get very frustrated with that.

  And I play games that say should work on my computer. I'm not overload or something.

  If anyone can help please, I'd appreciate it.

  Yes.

  To the support page and drivers for your specific model, and there is a tab of user guides.

  A click on it and you should find a guide service and maintenance for your laptop.

  Read the section (probably the chapter 4) on how to remove and replace a memory module.

  Be sure to unplug the PC and remove the battery before working on the inside.

• Pavillion G6-1240sa: G6-1240sa Pavillion: BSOD repetition and memory test failed

  Hello

  I get errors blue screen on my G6-1240sa laptop running Windows 7 (64-bit).

  SYSTEM_SERVICE_EXCEPTION

  Technical information:

  STOP: 0X0000003B (0XFFFFF80002F2D15F, 0XFFFFF880078CCB50, 0X00000000C0000005, 0 X 0000000000000000)

  I made Diagnostics, accessed through the F2 key on startup and make me

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MQ-MFPV4K-405503

  Product ID: A3S574EA #ABU

  Memory module

  I removed the laptop 2 GB module, a 4 GB module is also present. After re - run the test, I got:

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MR-MFPV4K - 405M 03

  Can someone help me with this?

  Thank you

  Hello

  Remove a RAM and run a test at the same time, if the test fails on both the RAM. You will need to replace both. If this is not the case, replace the one that fails the tests of RAM.

• I get BSOD, Multiple_IRP_REQUESTS_COMPLETE and sometimes SQL_NOT_LESS_OR_EQUAL all the time randomly.

  I recently got new hardware,
  Radeon HD 6950 video card
  Corsair Dominator GT DDR3 4 GB to PC15000
  MSI P67A-GD65 Motherboard
  Intel i5 processor

  I installed everything on the disk, but when I went into my browser I instantly BSOD Multiple_IRP_REQUESTS_COMPLETE
  This has happened every time that I went on my browser, sometimes instantly, or up to 10 minutes
  Then I reinstalled my Internet Explorer browser(Firefox) and soon the IE BSOD

  A friend thought that maybe it was Ram related so I did a bios memory test and it worked perfectly
  then he told me to download the minidumps via xfire
  There was something in .sys associated with Daemon tools, so I uninstalled and deleted the .sys file
  It worked for maybe 2 hours until I had another BSOD
  So I decided to just play games (Bad Company 2) until I could get my friend on the computer again, I didn't have a problem with that, up to this that may have been 2 hours
  past and I got the BSOD in SQL_NOT_LESS_OR_EQUAL. I kept getting that at random times playing it.

  The friend finally got online and I gave him the minidumps, and he said that befcm3xp was in the files... Well, which is linked to my modem so I got rid of this file and got him a new file
  At this point the BSOD became less frequent, and after I got the new file I did not get an another BSOD until perhaps 7hours had passed, it was an another SQL_NOT_LESS_OR_EQUAL

  Today, I looked at the internet and got an another Multiple_IRP_REQUESTS_COMPLETE
  so I told my friend I was going to just to get a few mindumps more so he can review and it was an another two SQL_NOT_LESS_OR_EQUAL
  before I gave it to him, he said it is still associated with BEFCM3XP

  I have no idea what to do now
  Here is a link to all my minidumps
  http://www.mediafire.com/?yy1p177kicsrc1p

  Hello

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  ====================================

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• BSOD 0x000000f4 and 0x0000007a bug check code

  http://jeffreybugahod.com/images/Screenshot_1.PNG Hi guys,.

  I am running Windows 7 64 bit and I do experience blue screen almost every week with bug 0x000000f4 and 0x0000007a random control. I don't really have any idea what the problem with my PC. I ran memtest86 for a night or Pluss and past 7 tests (it was 8 test said in the way). I also run chkdsk and there is no error. What could cause my PC BSOD issue?

  Here is the screenshot of my BSOD using BlueScreenView.
  
  I hope someone could help me solve this problem. Thank you.

  Jeffrey

  Most of Jan 2 accidents so far is called critical process terminated.  (something is to kill a windows process).  Please run the Driver Verifier to discover what

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

  .

• BSOD System_service_exception (ndis.sys)

  I get this BSOD for a while now and don't know how to fix it. Could someone help me? I downloaded a few files dmp here: https://yadi.sk/d/1Yp0RFjzdxtAp

  Thanks in advance.

  GT

  The most recent dump file does not appear to be check enabled.  That you got when you ran check/query?

  It appears that this accident was linked to pcdrcui. exe is part of Dell's Support Center.  I remove it or re - install.

• Windows 8.1 frequent BSOD; System_service_exception (3B)

  As the title suggests I get compatible blue screens. Here's a zip file of minidumps some: https://www.sendspace.com/file/20crhq. Although they are quite random it seems I have bring more often when I play games. Any help would be greatly appreciated.

  Sounds like defective RAM/video at this point given that you have followed all the steps (except that I can't check for #4, but I guess you did).

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff802e9e9b44c, ffffd000225a1d90, 0}

  1: kd > fffff802e9e9b44c ln
  (fffff802'e9e9b390)   nt! MiFindEmptyAddressRangeInTree + 0xbc |  (fffff802'e9e9b514) nt! PsCaptureUserProcessParameters

  The exception is produced in nt! MiFindEmptyAddressRangeInTree + 0xbc.

  ---------------------------

  1. run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  2 if Memtest will at least 8 passes without error whatsoever, your video card is probably defective.

  Kind regards

  Patrick