"Satellite P300D-201: BSOD: irql_not_less_or_equal" and pointer reference

Similar Questions

• Satellite 2450-201: slow startup and shutdown

  I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
  I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
  THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

  THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

  Hello

  Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

  For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

• Satellite Pro U200: BSOD error and sudden shutdown problem

  I have been using Satellite Pro U 200 since July this year.
  I had a strange problem. The problem began in mid-October where my laptop appears a blue windows error screen and restart. When the system will re-start the screen would flicker start and the operating system would not initialize correctly.

  It would give all sorts of error messages. Even if I tried to install a new operating system at this time where he would give error with the disc saying some file is corrupted. If you leave the phone turned off, it would again work normally.
  The disc would normally work on other portable computers desktop computers.

  I sent it for repair and they changed the hard drive. But the problem has returned to a degree less after a week.
  He sent again and this time they changed the motherboard.
  But the problem is now back with the blue screen stop.

  It's a Toshiba U 200 1.66 GHz memory gigabyte hard drive.
  I bought the Canada and use it in England, there is therefore a Canadian power cable.
  I am using Windows XP Pro with Service Pack 2

  Any help will be appreciated!

  Is it possible that some application you use is responsible for this? If there is an error on the corrupted file, I'm a bit skeptical about a malfunction of the equipment.

  You did some hardware upgrades?
  Check Please also this interesting article on the BSOD http://articles.techrepublic.com.com/5100-10877-6053684.html

• Satellite A350D-201 - pad touch and two buttons doen't work

  After updating the BIOS from version 1.6 to 1.8 the two buttons and the touchpad does not work.
  USB mouse works. Pointing device-enable (bios).

  I decided to reinstall Win7, in a time of installation the sensor does not work!
  Disassembled the laptop, I found nothing.

  Help!

  Have you installed the touchpad driver after the installation of Win 7?

  If so, you should also check if the touchpad has not been disabled using FN + F9 keys
  Also recommend that you check the setting in Control Panel-> mouse-> Advanced tab
  Here, you have to go into the advanced settings.
  For all I know, you could turn on and off several options of touchpad and touchpad functionality.

• Satellite P300D-20U - BSOD BCCode 124

  Image on screen mixes, sound stops and similar to 2-bit becoms music. It usually appears on the playback of video or music on flashplayer in Opera or Firefox.

  Reintalling OS did not help, official service support nothing done (they changed a video card, but it did not help). I tested the memory, update BIOS, processors tested, updated audio driver. Everything is ok.

  I think it's something wrong with audio (google shows a lot of similar problems, but I have not found a solution). What should I do?

  C:\Windows\Minidump\Mini110709-02.dmp
  C:\Users\user\AppData\Local\Temp\WER-1888563-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERF269.tmp.versi on.txt

  I'm sorry for my bad English

  Hello

  > nothing is official service support (they changed a video card, but it did not help).
  In this case you should contact the technicians again what you think?

  I mean, it can always happen that after exchanging a special part he doesn t work again because nobody is perfect.

  In addition you must also explain the technicians what your specific problem. When it happens, what you have tried, etc.

  I sure you will find a solution with the ASP m. ;)

• Satellite P300D-20U - BSOD 0 x 00000124 caused by hal.dll

  Hi guys.

  After my BSOD's long-term thinking, I got the main reason which probably caused it. It is hal.dll (bluescreenviewer told me). As far as I know, it's a driver of the motherboard.

  Where can I update it? Or what should I do?

  Why you again open thread on the same topic?
  You have already posted this here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=189835

  You must decide which thread you want to track

• Satellite 2450-201: nVidia display driver

  I just downloaded the latest driver from nvidia display for satellite 2450-201 of toshiba and now the screen went worse the driver is 3.6.4.8. for nvidia gforce 420 go what I'll do I tried to roll back, it won't let me! and I have not a system restore point nor is there some settings using nvidia!

  Hello

  I checked for your device and Toshiba download page, there is only one display pilot available (v 36,48). Can you please tell us what version number has this driver and where exactly did you find?

  Try to uninstall it from the Device Manager, restart the device and install version 36,48.

• Re: Satellite P300D - impossible to connect my TV (S-Video)

  I have Satellite P300D, OS win Vista and latest display drivers.

  I did everything according to the user manual.
  1. laptop turn off
  2. connect the TV with the S-video cable
  3 turn on the TV
  4. turn on the notbeook.

  After that, I see only a black screen on my tv.
  Are there other settings I need to change?

  Thank you

  Hi hdw.

  Have you chosen the right port of entry on your TV?
  Check this box!

  In addition, on the laptop you switch between monitors using the FN + F5 key combination.

  I put t know where you life, but normally you must choose in the driver options to display between PAL and NTSC TV standard.
  Check this box!

• Satellite P300D-14 and Win8 - cannot install optional update

  I have a Toshiba Satellite P300D-14th with Windows 8 Pro.
  Hard drive is not original (all 2 disc HARD original died)-now this is Seagate Momentus ST9500325AS.

  In the updates of Windows, I put in optional day - + AMD - storage controller - AMD Sata Controller +.
  [https://s017.radikal.ru/i408/1305/ee/0874c8831d27.jpg]
  I try to install it, then mobile must be restarted - I do restart, load until Windows starts... and restart again, and then it displays the message that it could not start Windows, than restarting again and Diagnostic Utility starts.
  This notice of restore (restore point). I do restore and the laptop starts as usuall.

  So, question is - why I can't install this update? and is there a solution (except do not install).

  P.S.: Sata remains AHCI in the BIOS for the controller.

  P.P.S.: drivers I found (thanks to Everest (AIDA64)):
  (1) standard dual channel PCI IDE Controller, driver date: 21.06.2006, driver version: 6.2.9200.16548
  (2) standard SATA AHCI Controller, driver dat: 21.06.2006, driver version: 6.2.9200.16548
  (3) controller storage in the Microsoft space, pilot dat: 21.06.2006, driver version: 6.2.9200.16548
  (4) ST9500325AS, driver dat: 21.06.2006, driver version: 6.2.9200.16384

  > So, question is - why I can't install this update? and is there a solution (except do not install)

  From my point of view, there will be a compatibility problem.
  The P300D is a little older and you use Win 8.
  AFAIK P300D isn t Win 8 supported... of course, this does not mean that you can not use Win 8 on this unit, but it might be possible that not all drivers are fully compatible, however, it's just an idea

• Satellite P300D-13N and Installation of XP problems (Sata driver)

  Hello

  I have some problems with my XP Downgrade.
  I tried to integrate the Intel Storage Manager driver in my XP CD, but unfortunately it did not work.
  Probably because I've been incorporating all THE drivers, who were available, not only who should work for my chipset.
  Anyway, in one of the threads of this forum, there is a link to [THIS how-to | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...

  [Here: http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my (sorry to make it in German) Device Manager preinstalled Vista.
  As you can see, there is no information about the Version of controller.

  So my question is, WHAT chipset is built into my laptop, because it is due to the fact that Intel drivers do not work AND there is no information on any Intel-inverter speed, I have no idea, I have to integrate into the XP CD to get my XP Installation working drivers. :(

  Help :(

  Thank you

  Laptop: Satellite P300D-13N PSPDCE

  Hello

  According to the specifications of the laptop, your laptop has an AMD RX780M chipset. Processor is AMD Turion Dual Core RM - 70 (2.0 GHz).

  I hope this info will help you.

  Good bye

• Lost recovery CD and Satellite 2430 201 joined...

  I have laptop of TOSHIBA Satellite 2430 201

  (1) I ve lost Windows recovery CD ROM How can I get another one back.

  (2) is this type of laptop have integrated Wireless LAN?

  (3) is to have this type of computer laptop built-in mic?

  You can order your CD from recovery of your local Toshiba authorized provider only, given that each cell has its own recovery CD. Maybe you could find someone with the same model and ask him. As for the other questions, I don't know--not even look it up in Google I found this model. This characteristic model what? I mean, what CPU, etc. Perhaps you could search the net and find something about it.

• Satellite A100-201 and Win7 update

  Hello

  I want to install Windows 7 and Microsoft Office 2007 on my laptop (Satellite A100-201). I ran the upgrade of Windows tool that tells me that my Toshiba Configfree (version 5.90.07) will have to be uninstalled before upgrade and that it would not be able to be reinstalled after installing Windows 7... What is the Configfree, do I need for my laptop to do something 'special '?

  Thanks in advance for your help

  ConfigFree is tool designed by Toshiba and it's an interesting tool for monitoring the network. This tool runs in the background and send you all the information about the network connectivity. If there is a problem this tool offers solutions that can help you fix connectivity LAN/WLAN/BT.

  To be honest you do not have this tool and if you didn't use it in the past you will he miss any.

• IntelPro2200BG (miniPCI WiFi module) and Satellite 2450-201 - question

  I want to buy a miniPCI WiFi module to my Satellite 2450-201.
  My laptop has a type III miniPCI port and a WiFi antenna version.
  Upgrading WiFi cheapest I found is IntelPro2200BG (IEEE 802. 11 b / g).
  This card will work with my laptop?

  See you soon,.
  Tomek

  Hi Tomek!

  The Intel card, I have no information, but why don't you look at the Toshiba products?

  Take a look at http://eu.computers.toshiba-europe.com
  You will find the "product catalog" and click on "Options and accessories.

  Search for 'Communications' and Mini PCI cards.

  You will find in many card Wifi from Toshiba.

  Take a look!

  Good bye

• Satellite P300D - 12L and PCI standard ISA bridge driver

  Hello!!!
  I just installed win XP on Toshiba Satellite P300D - 12L with all the drivers, but I have a problem. In the Device Manager on the "other devices" the foud of windows 'network controller '. In my view, is the standard ISA bridge PCI (PNP ID VEN_1002 & DEV_439D & SUBSYS_00000000 & REV_00). I search for the driver on the internet but without success.

  PLEASE HELP ME!

  THANKS IN ADVANCE

  BOBDAN

  Have you installed the LAN and WLAN cards successfully?

• Satellite P300D Pro and Windows 7 - LCD problem

  Hello

  I update my Toshiba Satellite P300D from Vista to Windows 7 Pro and the only problem is when I change rezolution of 1440-900 to 1280-800 or below my screen shrinks
  Ye and 1 last thing I have hiden partition recovery, but now I can't start to set Vista.

  Anyone know what to do about it?

  Have you noticed a few problems with the native resolution of the poster?
  It makes sense when you use non-native resolution LCD will be somewhat different.
  So if the image is perfect with a native resolution, everything is OK.

  If you did own option of recovery installation Win7 will be gone and you will not be able to install HDD recovery again.