BSoD with nVidia Quadro 600

Similar Questions

• Can I insatall a NVIDIA Quadro 600 in a Pavilion P7 - 1297C?

  I have 5 computers Office Pavilion, (2) P7 - 1297c, 1017cb-H8, H8 - 1217c and other steps here to get the number of. I am trying to upgrade the video cards from NVIDIA QUADRO 600.

  I installed a new PSU 600w in P & 1297_c. The system works fine without the new card. When I install the NVIDIA card and power on, nothing happens. I get the initial splash screen, but the system does not post, beep or let me in the bios settings. I remove the card and the system works fine.

  My computers can be upgraded to use the QUADRO 600 NIVIDIA. Computer product # H2L87AA #ABA. NVIDIA model # VCQ600-PB on box (VCQ600V2U-T on the map).

  If this is not the case, is there a video card like I can upgrade too. I am trying to run Solid Works on these computers, but the graphics are too crappy. I need best video cards.

  Help, please!

  Andrew

  HP final response is "sorry that we do not support upgrading the video card on this computer."

  I'm sorry it's a crappy answer. If you put a port PCIe x 16 on the motherboard, it should allow a card must be installed and start the computer to the top. I understand that if the driver does not work, or the system is unstable. But won't start do not at all? and the only answer is hard * bleep *!

  I advanced and bought 2 of Z820 with over-pants V5900 installed. It will be the last HP I recommned. I'll pass the time and make the turn. I have a Samsung really good one. Maybe I can get better support there.

• Dell Nvidia Quadro 600 reference - adapter provided by Dell dongle (display port > DVI) is missing entries

  A puzzle - DP > DVI adapter dongle supplied with my refurb Precision T3500 is absent from the entries on the side of DVI. [Both the bag of dongle and the dongle have labels with "DP/N 023NVR" and "CN-023NVR-48570-22M-039X-A00"]

  The card is Nvidia Quadro 600 Dell w / 1 DVI port and 1 DP.

  I want to go to DP to VGA *... so I need a second adapter grafted on the dongle from Dell.

  Missing entries are above and below the long horizontal (spade) of entry. All my DVI > VGA adapters have 2 tiny over the shovel and 2 pins below.

  The DVI port on the card fits those 4 pins.

  The dongle does not work.

  Can I just use the hot pin (heat a PIN and create holes) approach... or DVI use these 4 connections?

  If the latter, why NOT the adapter address these connections?

  __________

  * Yes, I keep autour monitors until they die - a strategy to continue to pay the mortgage

  If you have Display Port, then you can get a Display port to VGA.

  But they tend to be expensive sometimes more expensive than another monitor that is DVI or VGA vs HDMI

• 1 GB nVIDIA Quadro 600 and other specifications...

  Is the Quadro 600, processor and other enough (below) of the plug?

  For the first and AE CS5...

  	Dell Precision T1500 Base for Intel H57 Chipset	$792.00 1	$792.00 1
  317-2381	1	Intel & #174; Core & #153; I7-860 (2.8 GHz, 8 MB)
  317-2384	1	4 GB 1333 MHz, DDR3 SDRAM, NECC (2 DIMM)
  330-5522	1	Dell QuietKey keyboard
  320-3316	1	Monitor Option - no
  320-1845	1	1 GB nVIDIA Quadro 600, bi-ecrans, 1DP & 1DVI, Dell Precision
  342-0124

  
  11 TB SATA 3.0 GB/s, hard drive 7200 RPM with 16 MB Cache DataBurst, Dell Precision T1500331-0571
  1Live hard drive for Dell Precision T1500341-1256
  1C1 all SATA, NO RAID for 1-2 hard drives330-5783
  1No Media not Card Reader, computers to Office Precision421-1486
  1Windows 7 Professional, with media 64 - bit, fixed precision, English330-6228
  1Windows 7 label, fixed precision, Vostro, Optiplex desktop computer330-9458
  1Optical mouse USB MS111 from Dell, OptiPlex and precision fixed430-3246
  1Integrated 10/100/1000 Ethernet311-7463
  1Configuration of the Dell Precision T1500 and T3500, mini-tower chassis313-9192
  116 X DVD +/-RW data only Dell Precision T1500330-6758
  1Screw M3X5MM, HX, TF, SPAS T1500421-4370
  1CyberLink Power DVD 9.5, no media, Dell OptiPlex, Latitude, and Precision Workstation421-4539
  1Roxio Creator Starter, no media, Dell OptiPlex, Latitude, and Precision Workstation313-8764
  1Audio 5.1 channels integrated313-2663
  1No speaker option330-3156
  1Documentation, English, Dell Precision330-3157
  1Power cord, 125 v, 2 M, C13, Dell Precision330-2440
  1No media resource330-5528
  1Quick Reference Guide, T1500, English330-6760
  1Material transport for system Dell Precision T1500410-0348
  1Microsoft Office Starter 2010, Dell OptiPlex, Precision and latitude905-1697
  1Limited hardware Dell more initials Service year on-site warranty905-0182
  1Service of the basic material: Next Business Day Limited Onsite after diagnosis to extended distance of 2 years Service905-3438
  1Hardware Dell more Onsite extended Service year (s) limited905-7710
  1Service of the basic material: NBD limited Service on the spot after the first year of diagnosis remotely330-60431Dell and Recovery Backup Manager for Win7, MUI, Latitude, OptiPlex, Precision, Vostro421-26041CyberLink Power 8.3 AND Roxio Creator Dell Ed Media for DVD +/-RW, Dell OptiPlex, workstation and Latitude421-29921Press Kit, Win 7 Professional 64 - bit, MUI, Dell OptiPlex, Precision and Latitude

  All i7 - 8xx CPUS have the same limitation, the architecture of mobo P55/H57 and the same thing applies to all 2 x 00 (K) new Sandy Bridge CPU, mobo P67/H67/Q67 architecture. The two 1155 and 1156 pins of the processor are not suitable for editing.

  Why?

  1. only 16 channel PCI-e 2.0

  2. only 4 DIMM slots and max 16 GB

  3. only dual channel memory

  The major limitation is the number of PCI-e lanes. This makes it impossible to install a raid controller, which is sorely lacking for comfortable editing.

  Currently, the entry-level processor is the i7-950 on a X 58 mobo, 12 GB of RAM and a GTX 460 graphics card.

  The alternative is waiting until the end of 2011 for the Sandy Bridge E on a X 68 mobo, with 40 channels PCI-e 3.0, 8 DIMM slots, max 32 GB and quad, without integrated graphics useless path memory in the processor.

  The choice of Dell is ill advised. All Dell machines come with paralyzed BIOS which makes it impossible to overclocking, they come with custom PSU which cannot be replaced by anything else that Dell, they rob you blind on Extras at exorbitant rates, as hard drives additional, extra memory, etc. They also pre-install all kinds of shit without the media, which goes down the drain when you want to reformat your OS drive.

  Build your own or have ADK build one for you.

  PS. show you how Dell steals blind you:

  1. upgrade to i7 - 880, + $740. The CPU is also about $ 340, and you still have the 860 for sale on e - Bay.

  2. upgrade to 16 GB, + $1810. Elsewhere, sticks of 4 x 4 GB are around $200 and you still have the original 4 GB for sale on e - Bay.

  3. upgrade to two drives of 1 TB, + $800. Also separately to sell for about $200 with 32 MB memory cache, double hidden Dell as well as the original disc to sell on e - Bay.

  4. Add a BR 6 burner x, + $313. Elsewhere a BR 10 x burner for $100.

  In short, Dell you $3 658 charges for upgrades on a system, you can do it yourself for $840 to underspecced.

  
  

  You must be nuts to accept such a deal.

• Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  jasonf18090788 wrote:

  I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

  Where have you seen that? It is not on the list of the AE: system requirements | After Effects

  Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

• Engine Mercury works only with NVidia Quadro cards?

  Fellow Forum members,

  Prices for NVidia Quadro cards are INCREDIBLY expensive. Finally, I checked the prices were as shown below:

  Quadro 6000 = $4,000

  Quadro 5000 = $1,800

  Quadro 4000 = $1,000

  My question to someone there is '' done the Mercury Motors CS5 for After Effects and Premiere Pro exclusively work onlly with Nvidia Quadro series cards? ''

  If the answer to my question is NO, then I would that this thread can be dedicated to the sharing of alternative solutions for graphics cards that will not burst his portfolio.

  My motherboard supports technology ATI CrossFireX Quad, 3 - Way CrossFireX and CrossFireX and NVIDIA Quad SLI, 3 - Way SLI, and SLI technology.

  My way of thinking, that's if I could use two or three ATI cards bridged together to match 80% of the performance of Quadro 6000 at a fraction of the cost, I'd be happy.  However, the bump in the road is if the motor Mercury of CS5 is compatible with bridged ATI graphics cards together?  Motor Mercury of CS5 cares what type of graphics resident cards into the motherboard in order to deliver 100% of the performance?   Any information will be greatly appreciated. Thank you.

  Hello

  In addition, CS5 does not use SLI technology

  It uses only 1 graphics card

  This thread explains some good stuff

  http://forums.Adobe.com/message/2791699

  information seems accurate

  hope this helps

  j

• ZBook 17 G3: ZBook 17 G3 with nvidia Quadro M2000M

  That's right - who's wrong... If any?

  I have a G2 470 ProBook Revit and Autocad Architecture running G6W69EA and it does not work well.

  So I think buy a ZBook 17 G3 instead, and comparing the different specifications, I came across this:

  According to NVIDIA to http://www.nvidia.com/object/quadro-for-mobile-workstations.html the Quadro M2000M made for the Platform 15.6 ".

  Among other things, HP ZBook 17 G3 - T7V62EA #ABY is built according to the specifications of HP with the Quadro M2000M, however it NVIDIA should be the M3000M when it is on a platform 17.3 ".

  Is this perticular ZBook good built, or is - this 'money by windows' not go for something like the Y6J67EA with Quadro M3000M place?

  There is nothing wrong with the 17.3 "and the combination of M2000M.

  The M2000M is enough for most use Revit and Autocad.  Very complex models may require the graphics power of addition, where intermittent 3D rendering or low complexity models can work very well with less graphical power.

  Windows 7 configurations are always available because some big company facilities have not yet standardized on Windows 10.

• Upgrade HP 8570w with NVIDIA Quadro K2100M

  Hi, I have a HP 8570w and recently I bought a NVIDIA Quadro K2100M (N15P-Q3-A1).

  I installed the graphics card in my HP 8570w but the screen is not working, it stays black.
  I reinstalled the original video card K1000M and everything works fine, so I don't know if the new K2100M graphics card is broken or if I have to do something to make it work (for example to update or change the configuration of the bios).
  I have the latest version of the Bios (version F.43 68IAV 08/10/2013), what I have to do?
  Kind regards.

  The ebay seller told me that he starts flashing the video bios of the K2100M with a compatible vbios HP to solve the problem of incompatibility.

  I will inform you if this solution won't work...

• Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content

  I have a

  Dell Precision 7710

  6920HQ-i7 CPU @ 2.9 GHz

  32 GB of Ram

  Windows 7 Pro Sp1

  NVIDIA Quadro M5000M 369.49 driver version

  I bought an upgrade for my

  M6700 Precision

  Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer.  When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable.  The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.

  We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.

  As far as I can tell all our drivers for everything on this laptop are up-to-date.

  We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.

  I tried tweaking pretty much all other settings I can think / see.

  I tried to use the Dell Precision optimizer to select different profiles with no luck.  The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.

  I ran Diagnostics on the laptop available on the Dell support site.

  I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application.  We have desktop computers at the office where he works well with other Nvidia cards / best of all.

  In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect.  I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.

  So I wonder:

  If anyone out there has experienced something similar?  If so, any suggestions on how to fix or things to try would be greatly appreciated.

  Thank you

  We solved the problem by making changes in our application software.  We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also.  Perhaps because we are trying to run the application at 4K.  If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.

• Problems with NVIDIA Quadro K4000

  I have a new HP with a NVIDIA Quadro K4000 workstation. Premiere Pro does not recognize, so "The Mercury Playback Engine's GPU acceleration" is not available. Does anyone know how to force Premiere Pro to recognize material?

  I'm new to this forum... Thanks for any help you can provide!

  I just did a clean uninstall / reinstalling the Nvidia driver, and that seems to fix the problem. Just somehow install / reinstall was not enough. I had to go directly to the site for a new driver package.

  Thank you very much for your help! I am very grateful.

• W540 with nVidia Quadro K2100M performance issue

  Hello

  Recently received a bunch of W540 with the highest specifications here in Norway (REF: 20BG001CMN), but I'm a little surprised by the performance on the descrete graphics. I run the Benchmark in the Valley (http://unigine.com/products/valley/download/), and on ressolution of 1920 x 1200, I am able to get about 20 FPS. While testing on a game (not sure of the plug) 1 pc, we got 170 FPS. I got the latest driver from nVidia. I wasn't expecting this card for performance so low? We see the same results on several W540 with the same specc'd.

  This card is just brilliant to CAD or y at - it something wrong with the drivers? Anyone else got any experience with this card?

  Please be specific about the parameters.

  Valley of the Extreme HD parameter on GTX690 (3072 hearts) gets only 75 fps. K2100M has 576 carrots.

  170 fps is result Quad SLI or wrong settings.

  So in short, 20 fps is fine.

• Lenovo W510 flicker/blur when it's on battery (with nvidia Quadro FX880M)

  Hello

  I recently bought 2 notebooks Lenovo W510, 8 G RAM, Quadro FX880M, battery 9 cells, W7 64-bit.

  Both have the same problem: when you work without external PSU (on battery), the screen will start to Flash / get blurry from time to time, for a second or two.

  Note that this happens not only at the point where I switch from external power to the battery, but all the time, I work with the battery.

  I noticed that it happens more frequently when Internet Explorer is running.

  When external power is connected - all right.

  Anyone who has observed the same problem / knows how to solve?

  Thank you!

  Update video drivers - it should solve this problem.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-74582

• Upgrade graphics card for elitebook 8730w with NVIDIA Quadro FX 3700 M 2 GB

  Tell me please, can I update the graphics card for this device

  Hi @karik

  Welcome to the HP Forums! I see that you are looking to upgrade your graphics card. You're lucky, it's one of the few a few laptops that you can update the graphics. Here's your Guide to Service and Maintenance and page 64 you will find compatible graphics card and instructions on how to install it.

• ThinkPad Advanced Dock compatibility multiple monitors with NVIDIA Quadro FX 370 - using T61p

  
  
  

• T61 Nvidia Quadro NVS 140 M... garbled display problem!

  I have a T61 (bought in August 2007) with Nvidia Quadro NVS 140 M graphics card. I still have problems to display with the screen all of a sudden get green (?). When restarted, the BIOS itself shows a corrupted image (screen half blue, half red) and some random characters. This only happens if I use the PC for 15 minutes. Once he gets a chance to cool down, it goes back to normal working conditions.

  My warranty expired about a month ago and since I see this problem. Can anyone suggest what could go wrong.

  Thank you.