Bug in Premiere Pro CC Multicam?

Similar Questions

• Premiere Pro CS6 - Multicam is BROKEN! vs FCPX, FCP7 (Final Cut Pro), Avid, Sony Vegas

  If you plan to spend in FCP7, FCPX, Avid or another edition of Premiere Pro CS6 program, there are SEVERAL good reasons to do so, HOWEVER, if you deal with the edition of several cameras (multicam) so you think twice, until this problem is resolved.

  How to edit in Adobe Premiere Pro CS6 multicam? What is the best program editing for mulitcam or multiple camera editing? - The answer, as long as the question below is fixed, isn't Adobe Premiere Pro! From CS6 (version 6.0.2), this lack of 'design' or the 'weirdness' described below, multicam editing is very difficult and inefficient in Premiere Pro. These first two issues above are what I searched Google in hopes of a solution to a problem plaguing Adobe Premiere Pro for years, literally. Unfortunately, in the new Premiere CS6, with so many other great innovations, the question remains still makes it very difficult to do an editing multicam compared to Final Cut Pro 7, Avid, Sony Vegas, FCPX, etc.. They all handle editing multicamera in different ways but, having recently passed away from FCP7, and has worked on several modifications mulitcam, Premiere Pro CS6 (and CS5 and CS5.5) has serious problems with the multicam function that is broken right now (version 6.0.2) in first CS6 and fact editing multicam VERY frustrating experience and a lot less effective compared to the other NLE. If it's a drawing, then its imperfect as Yes, you can work around it and difficulty about what you did, but why so you have to keep wasting time precious 'fixing' in such things? All is not supposed.

  
  

  The question:

  Hit the button of the SPACEBAR or pause or stop during a multicam editing actually stop the edit, made a cut in your timeline (chronology) and then will be another camera (angle or shot), if you want only it or not!

  This issue was known by Adobe for more than two years, but they push aside, call a quirk of design and ultimately avoid such question stated in this thread of attachment: http://forums.Adobe.com/thread/738084?start=0 & tstart = 0

  Make cuts and put the angles on you when you simply to pause or stop playback is a huge problem of having your editing program. If this were happening in the normal timeline, so I'm guessing it would have been fixed, but it has not been fixed and it causes the editor to have to go back and remove unintended cuts and back shots where they should be. The PAUSE button should only SUSPEND or STOP playback, as it does in other programs. But in the first he stops, make a cut in your timeline and then switches to the first angle or shot you started with if you want or not. There is no way to prevent this at the moment on CS6. The other thread that talks about the question refers to the fact that the "question doesn't have the numbers" to make it a priority to be fixed and there are other "larger issues" that need to be corrected first, which makes me wonder if Adobe really listen to the comments of the user. I mean, 2 years, people complain about that and not of miracle. Their response was 'add to wish list' or ' this isn't a bug, it's a quirk, then do an requested feature"or"its designed that way." Designed like that? Who would really want it like that? No other NLE does this and for good reason. If the pause button pause just reading and that's it, do you think there would be a thread for a period of 2 years on how to hit pause "should also make an incision in the timeline and move from the shots? I doubt it. Its a defaultdesign. I feel strange asking the feature 'Please take the pause break button' or 'Please make the stop button to stop playback. Looks like its brokenness, to me.

  If the robot multicam is a major objective for the team Adobe Premiere, go ahead, which I think it is, then please start by making even the basic works work as one would expect to BREAK = PAUSE. STOP = STOP. Phew! It was difficult. Fact. Fixed. Travel! Currently, this design is counterproductive, not intuitive, helps no one and only lost valuable time while the Publisher must quickly "solve" the problem.
  

  Well, I thought I'd do two things here:

  (1) start a thread with as many keywords as possible so that this "numbers" question in this forum and in Google searches. I hope that soon when you google 'First multicam Pro' this will be the first topic on the first page. My hope is that I can put a nice 'RESOLVED' or 'FIXED' label on this thread, one day next (and I'll for sure!). If this is the case, it is a testament to the theory of wheel ran combined with a small web analytics.

  (2) do this a new thread, rather than continue in the old thread because it is time to ask a new question: how long will it take for Adobe a problem when its design is essentially broken causing users to have to do a 'fix' every time? At the moment it happens two years! This isn't a feature request... his service broken in the first. A drawing... necessary. I can't listen to Adobe and they care about certain things, but how fast they act? This is my real question.

  I wonder if this thread has more "we have more important things to fix" or "is not that big of a problem" or "this isn't a problem at all, it's an oddity" or "you can just go back and correct the problem, whenever you have to stop because it takes only a few seconds' or 'its not broken its designed to be counter-productive and frustrating for users.  Time will tell. Well, if you do mulitcam changes as much as I do then these "seconds" are added. It is designed this way, and then Adobe, I ask you this question: If you hit pause on your TV remote button, and he stopped at the TV live, but also turned the volume all the way down and changed the channels... always so would you call that a quirk? It would be wise to design a remote control like that? I would say the key on your remote control does not work well and should be fixed. Yes, you could address it quickly by pressing the button "last" or "reminder" and then hit the volume up button, but shouldn't the key BREAK of your remote did exactly cela and only that: BREAK?

  Please respond... to apparently numbers.
  

  Have you tried what a user suggested earlier in the thread? Although it takes a little getting used to, it works for me perfectly.

  "Before to stop playback, press the 0 (zero) on the keyboard and then you can stop the game (with the SPACEBAR) without cutting in the timeline."

• MP4 tiny bug Adobe Premiere Pro CC 2015.1

  I had a project that works perfectly in Adobe first Pro CC 2015.0.2 with file mp4 lowercase extension.

  In Adobe Premiere Pro CC 2015.1 all these files don't work no more no picture no sound.

  If I import them again I have picture but no sound.

  The job is to put the extension in capitals, and it works.

  Even the MTS file I have this tiny time of the extension.

  Is this a bug?

  Thanks for your help.

  Sorry for my bad English

  Also, you can simply rename the folder in which the media is.  Each of these methods will 'trick' PP saw them as 'new' clips, and it starts to work correctly.

• Weird bug in Premiere Pro CS6 whistle

  I have a very strange problem with audio in Adobe Premiere Pro CS6.

  Whenever I have create a furrow in an audio clip, a few seconds of hissing broadband is introduced in it after the cut. The hiss is only in the exported video. It does not appear after each cut, but about 10% of them.

  The whistling is also there when I export in various video/audio formats. This is when I used different codecs edition. He might be there for the clips I recorded with some not very good microphones on a Canon 5 d II, but the hiss appears only after that I have a tool for audio editing and export audio/video or just audio. Sometimes however it shows immediately in PP before export. If I clean the whistle at the hearing for a given element I hear is no longer in PP but once again it reappears after export.

  It seems that the problem appears when editing video shot on a Canon 5 d MII with the camera in mic or several microphones of rifle hunting, but not with a lapel mic decent. Change Edition and export codecs does not help the problem.

  (i7 960 3.3 GHz, Win 7 sp1 12 GB, Nvidia GeForce GTX 470 1280MB, PP 6.02)

  All the clips had reduced a whistling noise.  Nobody has found a good solution for the Bug of weird whistling "?"

  Sure.  Do not use these effects.  Make your audio work in hearing.

• Hotlinks and Premiere Pro sequence Multicam?

  I couldn't find a way to get the AE to the individual to recognize cuts from one channel to the other in a multicam PR. sequence this sequence was sent to AE via dynamic links with the command ' replace it with after composition Effects.  He behaves as if I sent a normal sequence with 2 video layers in AE; IOW high video always follow overlays (and obscure) the background video track.

  Is Multicam point a no-go for DL between AE and Pr?

  -Jeff

  There is a gap in the current implementation. If you consider this a feature or a bug report, please submit it here.

• Premiere Pro CC 2015 errors when reading a multicamera editing.

  Premiere Pro CC 2015 errors when reading a multicamera editing.

  Running on Mac.

  Started editing images mult-camera and falls down for only when you try to play the scenario of several camera. Other chronologies play without issue.

  Any ideas?

  It turns out that this is a bug with CC2015 in multi-camera. Adobe is working on fix of course.

• How can I fix Premiere Pro new audio bug?

  After an update, my Premiere Pro now distorts my audio when you import into my workspace. Pieces of my audio disappeared, but the file is intact when played outside of Premiere Pro. If you have any ideas that might help, please do not hesitate to contact me by e-mail at

  [personal information in accordance with the strategy - https://forums.adobe.com/docs/DOC-3731]
  

  I made a video to explain

  How can I fix the audio bug Premiere Pro BTP -?-YouTube

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]
  

  Convert the MP3 to a wav file. Agency dislikes some pm3 files.

• Premiere Pro CRASH - always DNxHR Bug 2015.1

  After the last update PP 2015.1 was DNxHR in PP. But now I can't even start PP. It instantly crashes after that I have started with the following information.

  Problemsignatur:

  Problemereignisname: APPCRASH

  Anwendungsname: Adobe Premiere Pro.exe

  Anwendungsversion: 9.1.0.174

  Anwendungszeitstempel: 564dce25

  Fehlermodulname: DNxHR.dll

  Fehlermodulversion: 2.1.0.9

  Fehlermodulzeitstempel: 55352343

  Ausnahmecode: c000001d

  Ausnahmeoffset: 000000000000f4c9

  Betriebsystemversion: 6.1.7601.2.1.0.256.48

  Gebietsschema-ID: 1031

  Zusatzinformation 1: b14f

  Zusatzinformation 2: b14f0bb255ff1fda75b2218f14e23e1b

  Zusatzinformation 3: 1a8d

  Zusatzinformation 4: 1a8d695bd80513a1d5d2f39f3606178d

  System
  Teacher of Win7 64 bit

  AMD Phenom II X 4 965
  XFX AMD R9 380 (Crimson latest driver)

  16 GB DDR3-1333 RAM

  I had weeks of bug before with my old HD 5850 and I thought it was because old graphics card. Now, I've updated the R9 380 and re - install Win7. But ALWAYS the same bug. Come on Adobe, say anything, give us a fix now!

  I read another Thread in this Forum about the same bug, but no Support from Adobe responded. Its ridiculous. I can't use my paid im software. And the worst. This update was one month away, still no correction.

  Any1 has found a solution?

  Hi Matze Ed,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Premiere Pro CC 2014 - jerky playback of multicam

  So I'm under Premiere Pro CC 2014 (8,0) on OSX (10.8.5) Mountain Lion, using CUDA acceleration and everything works well except for one thing: when I do a multicam edit I switch the program monitor in multicam as usual mode. However, during playback, I'm dropping frames with video (audio playback is normal). This happens with any definition, even at 1/8 reading. As I kept the previous version of Premiere Pro (7.0), I checked it's multicam playback and it is quite normal to full resolution. After spending and corresponding to all the parameters of 8.0 to 7.0 I am really at a loss with this problem, ideas?

  As I said earlier, the only solution I found was to transcode my images at DNX. With DNX images, I was able to make multicam with 8 angles without lag. With images of ProRes he would get bogged down with only 3 cameras.

• Premiere Pro CS6 (6.0.5) Capture HDV crash Bug

  Where will be fixed the bug Capture HDV to 6.0.5?

  Just buy the Mac version and may not even start to use because of this bug.  Seems to have been a question for a while (9/2013).

  Found many discussions on CreativeCow and Adobe receommend even reinstall and back to 6.0.4.  User who tried and even returned to 6.0.2 and still has problems with the HDV capture.  They used a Canon, I use a Sony HVR - Z1U.

  Thank you

  The f

  Hi Slim7,

  You can remove the previous version and follow the instructions below to download Premiere Pro CS6.

  Hello

  Please follow the steps below

  1. go to www.adobe.com

  2. click on downloads (top)

  3. Select Adobe Photoshop elements 12, which will open Photoshop download page. (This page is just to open the download page so do not click download go to the next step)

  4 once the Photoshop Elements download page is open click on the the link below for Premiere Pro CS6 start downloading.

  For MAC:

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  6. double click on only .dmgfile to install the product once the two files have finished to download to start the installation.

  Once the product is installed, go to the link below and updated for the desired update.

  Mac:

  http://www.Adobe.com/support/downloads/product.jsp?product=98&platform = Macintosh

  Kind regards

  Vinay

• Adobe Premiere Pro CC 2015 - Bug report: misinterpretation alpha with equipment Sony FS55

  Hello...

  Since I was the last update for first Pro CC 2015 video material of the Sony FS 55 seems wrong:

  It is transparent, the underlying layer is visible.

  Even if the opacity is 100, I don't have the layer style changes and there is no effect.

  It seems that the 'solution' is to interpret the alpha channel of the video sequence and to mark the option where you can ignore the alpha channel.

  There is no such problem with any other camera images.

  This problem did not appear in the first version before - with the same material in the same project.

  Anyone else having similar problems?

  Best, Max

  …

  images: Sony FS 55 (mxf), S - Log 2, 4096 x 2160 pixels

  sequence settings: 3840 x 2160 (UHD), 25 fps

  Adobe Premiere Pro CC 2015 (9.2.0)

  Mac OS X Yosemite 10.10.5

  Mac Pro (2013), AMD over-pants D700

  I stick just the solution I have found below

  I select the mxf in the project bin > right click > pop-up window > change > film > pop-up window - Clip change and low > channel Alpha - select 'ignore Alpha Channel.

  then the music loses its transparency

  Matching thread I paste

  a link to here

  After that update clips are 'ghost' - first Pro CC 2015 9.1.0 (174) build

• Adobe Premiere Pro bug with Mac News El Capitan. Project window bugs when paused/stopped (including screenshot)

  I just upgraded from Yosemite to El Capitan, and when I started editing with Adobe Premiere Pro, my project window would look like this in pause/stop:

  

  If you had read this forum for 2-3 weeks, you would have seen a TON of these... and there are also many other problems of El Capitan. Not only for Adobe, but for all kinds of software. Heck, even the crowd of MS Office is angry against El Capitan!

  If you can, roll back to Yosemite... There is a thread, you should find in a search with the statement on this.

  Otherwise, to do this, go to project settings... Acceleration of mercury... and together for the only software rendering. A box should then appear, and in this document, select "remove the Previews. Close & restart.

  And... screaming Apple to get them to pay some attention to their 'old style' user-base of the computer. They fell in love with devices, and you're so old school... at least for them...

  Neil

• Premiere Pro CS6 Warp stabilizer Bug... I think so!

  Hi all

  I was wondering if someone could possible help me with a problem I have with the stabilizer of curvature in Premiere Pro.  I have a clip I want to stabilize, I apply the string stabilizer and it crosses its analysis with no problems, and then that's all that the clip is stabilized.  If I can make my calendar it causes my clip to jump to give me a big black stripe down and the quality of the clip is destroyed.  I've included screenshots to better show this behavior.

  1: this is the clip I want to stabilize so I add stabilizer chain and it analyzes the clip and it's job. Perfect, that's what I want!

  

  2: I can make my calendar so that I can read with ease

  

  3: all of a sudden, the quality of the clip is greatly diminished and the clip has a big black band.  No matter what I used as soon as I make it warp settings is the result.  It never used to do this, it has only just begun.

  

  Help, please

  I think I found the problem, the error seems to be dependent on the codec you use for the video preview. I changed the codec to preview sequences and it worked and it ceased to occur.

• New project from Premiere Pro bug

  Hi guys I have a huge problem with Premiere pro since the new patch whenever I'm doing a new Premiere Pro project change to how it was before and becomes like that... So I lose 2 min to do as usual, and if I once again a new project he repeats the same thing... I don't know how to fix it can anyone help me please?

  Reset the current workspace (under window/workplace)

• Problem of Premiere Pro update and bug of the SOUL

  After I renamed the files and e mptying media in preferences Cache database I thought everything was working, it's up to what I exported my project for updating Adobe media encoder. There was no audio playback from the rendered file and my Canon 5 d clips were absent are not acvhd. It is a multi-cam project and the audio that was used was the acvhd clips. Pretty weird... So I tried to export the project from first to work around the TEA and it worked perfectly.

  In the SOUL, please go to Preferences > general and uncheck import sequences in native mode. Then export the sequence from Premiere Pro to SOUL and see if the problem persists.

  If this change solves the problem, then we are interested in a copy of the project, if possible, to test.