Weird bug in Premiere Pro CS6 whistle

Similar Questions

• Premiere Pro CS6 (6.0.5) Capture HDV crash Bug

  Where will be fixed the bug Capture HDV to 6.0.5?

  Just buy the Mac version and may not even start to use because of this bug.  Seems to have been a question for a while (9/2013).

  Found many discussions on CreativeCow and Adobe receommend even reinstall and back to 6.0.4.  User who tried and even returned to 6.0.2 and still has problems with the HDV capture.  They used a Canon, I use a Sony HVR - Z1U.

  Thank you

  The f

  Hi Slim7,

  You can remove the previous version and follow the instructions below to download Premiere Pro CS6.

  Hello

  Please follow the steps below

  1. go to www.adobe.com

  2. click on downloads (top)

  3. Select Adobe Photoshop elements 12, which will open Photoshop download page. (This page is just to open the download page so do not click download go to the next step)

  4 once the Photoshop Elements download page is open click on the the link below for Premiere Pro CS6 start downloading.

  For MAC:

  http://trials2.Adobe.com/AdobeProducts/PPRO/6/OSX10/PremierePro_6_LS7.dmg

  6. double click on only .dmgfile to install the product once the two files have finished to download to start the installation.

  Once the product is installed, go to the link below and updated for the desired update.

  Mac:

  http://www.Adobe.com/support/downloads/product.jsp?product=98&platform = Macintosh

  Kind regards

  Vinay

• Adobe Premiere Pro CS6 reading video problem/Bug

  I was editing a video for the past few weeks, but recently, after that I've been editing for a few minutes, all of a sudden my video won't play in the playback window. When I hit the play button (or space bar) it nothing - it's all here. All the clips are rendered (with the green bar), but I don't see my changes because it does not play. I even be able to move the slider along the timeline and it will show the video in the playback window, but it will not play back in real time. As I said, I have been using Premiere Pro CS6 for some time and did not have this problem so far. Also, when I drag a clip in the preview window, it does not either (but I am able to move the slider along the timeline). I must stop first and open it again, then he still works for a few minutes, and then the same problem occurs. Help, please! The specs for my lap top are the following: Macbook Pro Retina Display, i7 clocked at 2.6 GHZ, 16 GB RAM, 500GB SSD

  I found the problem. And a solution to the problem.

  I can change on first Pro 6 files, but after a dozen strikes, the SPACEBAR and keys stop working while the save cursor work work

• Premiere Pro CS6 - Multicam is BROKEN! vs FCPX, FCP7 (Final Cut Pro), Avid, Sony Vegas

  If you plan to spend in FCP7, FCPX, Avid or another edition of Premiere Pro CS6 program, there are SEVERAL good reasons to do so, HOWEVER, if you deal with the edition of several cameras (multicam) so you think twice, until this problem is resolved.

  How to edit in Adobe Premiere Pro CS6 multicam? What is the best program editing for mulitcam or multiple camera editing? - The answer, as long as the question below is fixed, isn't Adobe Premiere Pro! From CS6 (version 6.0.2), this lack of 'design' or the 'weirdness' described below, multicam editing is very difficult and inefficient in Premiere Pro. These first two issues above are what I searched Google in hopes of a solution to a problem plaguing Adobe Premiere Pro for years, literally. Unfortunately, in the new Premiere CS6, with so many other great innovations, the question remains still makes it very difficult to do an editing multicam compared to Final Cut Pro 7, Avid, Sony Vegas, FCPX, etc.. They all handle editing multicamera in different ways but, having recently passed away from FCP7, and has worked on several modifications mulitcam, Premiere Pro CS6 (and CS5 and CS5.5) has serious problems with the multicam function that is broken right now (version 6.0.2) in first CS6 and fact editing multicam VERY frustrating experience and a lot less effective compared to the other NLE. If it's a drawing, then its imperfect as Yes, you can work around it and difficulty about what you did, but why so you have to keep wasting time precious 'fixing' in such things? All is not supposed.

  
  

  The question:

  Hit the button of the SPACEBAR or pause or stop during a multicam editing actually stop the edit, made a cut in your timeline (chronology) and then will be another camera (angle or shot), if you want only it or not!

  This issue was known by Adobe for more than two years, but they push aside, call a quirk of design and ultimately avoid such question stated in this thread of attachment: http://forums.Adobe.com/thread/738084?start=0 & tstart = 0

  Make cuts and put the angles on you when you simply to pause or stop playback is a huge problem of having your editing program. If this were happening in the normal timeline, so I'm guessing it would have been fixed, but it has not been fixed and it causes the editor to have to go back and remove unintended cuts and back shots where they should be. The PAUSE button should only SUSPEND or STOP playback, as it does in other programs. But in the first he stops, make a cut in your timeline and then switches to the first angle or shot you started with if you want or not. There is no way to prevent this at the moment on CS6. The other thread that talks about the question refers to the fact that the "question doesn't have the numbers" to make it a priority to be fixed and there are other "larger issues" that need to be corrected first, which makes me wonder if Adobe really listen to the comments of the user. I mean, 2 years, people complain about that and not of miracle. Their response was 'add to wish list' or ' this isn't a bug, it's a quirk, then do an requested feature"or"its designed that way." Designed like that? Who would really want it like that? No other NLE does this and for good reason. If the pause button pause just reading and that's it, do you think there would be a thread for a period of 2 years on how to hit pause "should also make an incision in the timeline and move from the shots? I doubt it. Its a defaultdesign. I feel strange asking the feature 'Please take the pause break button' or 'Please make the stop button to stop playback. Looks like its brokenness, to me.

  If the robot multicam is a major objective for the team Adobe Premiere, go ahead, which I think it is, then please start by making even the basic works work as one would expect to BREAK = PAUSE. STOP = STOP. Phew! It was difficult. Fact. Fixed. Travel! Currently, this design is counterproductive, not intuitive, helps no one and only lost valuable time while the Publisher must quickly "solve" the problem.
  

  Well, I thought I'd do two things here:

  (1) start a thread with as many keywords as possible so that this "numbers" question in this forum and in Google searches. I hope that soon when you google 'First multicam Pro' this will be the first topic on the first page. My hope is that I can put a nice 'RESOLVED' or 'FIXED' label on this thread, one day next (and I'll for sure!). If this is the case, it is a testament to the theory of wheel ran combined with a small web analytics.

  (2) do this a new thread, rather than continue in the old thread because it is time to ask a new question: how long will it take for Adobe a problem when its design is essentially broken causing users to have to do a 'fix' every time? At the moment it happens two years! This isn't a feature request... his service broken in the first. A drawing... necessary. I can't listen to Adobe and they care about certain things, but how fast they act? This is my real question.

  I wonder if this thread has more "we have more important things to fix" or "is not that big of a problem" or "this isn't a problem at all, it's an oddity" or "you can just go back and correct the problem, whenever you have to stop because it takes only a few seconds' or 'its not broken its designed to be counter-productive and frustrating for users.  Time will tell. Well, if you do mulitcam changes as much as I do then these "seconds" are added. It is designed this way, and then Adobe, I ask you this question: If you hit pause on your TV remote button, and he stopped at the TV live, but also turned the volume all the way down and changed the channels... always so would you call that a quirk? It would be wise to design a remote control like that? I would say the key on your remote control does not work well and should be fixed. Yes, you could address it quickly by pressing the button "last" or "reminder" and then hit the volume up button, but shouldn't the key BREAK of your remote did exactly cela and only that: BREAK?

  Please respond... to apparently numbers.
  

  Have you tried what a user suggested earlier in the thread? Although it takes a little getting used to, it works for me perfectly.

  "Before to stop playback, press the 0 (zero) on the keyboard and then you can stop the game (with the SPACEBAR) without cutting in the timeline."

• GPU does not work on EL Capitan - filling of Premiere Pro CS6

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  Bertrand says:

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  This is a user forum, you talk to other users like you, no Apple or the manufacturer of your GPU - which is, moreover, you neglected to specify in your message.

  When you post should give specific information - in this case, your mac model, and especially what GPU it uses.

  Some Macs have discreet GPU NVIDIA or AMD, some only the integrated Intel GPU.

  If your GPU is you can go to their site and update the driver of NVIDIA CUDA. Who can help, because, as far as I KNOW, first would take advantage of CUDA.

  You can find out what GPU your mac uses ranging from the Apple, choosing about this Mac menu and then clicking on "views".

  Here's what it shows in my mac:

  

• Why am I wasting my marker comments in Premiere Pro CS6?

  I'm working on a project that has a ton of interviews.  Generally, I go through them and set markers for each answer to a question.  I'm going to type notes for each marker in the 'markers' Panel in order to easily go back and know what was said without having to re - watch.  When I'm done for the day, I'll save my project (which I do quite often throughout) and close.

  When I go back and open my project, my comments are completely missing.  And my marker and exit points are reset.

  Has anyone come across this issue before?  I tried to save it under a new project, but still have the same problems.  Please let me know.

  I'm under Premiere Pro CS6.  The film is Canon 5 d Mark ii.

  This is a bug.  Always with us in the CC, too.

• Any ideas? Premiere Pro CS6 crashing whenever I try to import clips!

  Hey everybody,

  I'm relatively new to Premiere Pro CS6 (gradually switching to Final Cut), so forgive me if there's any details miss me. I have real problems with getting the app to work, unfortunately.

  Here's the problem:

  I can create and save projects very well. Nothing is slow or appears bad. However, every time I want to import clips (in any parameter of project/sequence, or codec, as well as different types of clips from the camera), Premiere Pro instanty throws a message - immediately - to say:

  «I'm sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.» We will try to save your current project".

  It is literally impossible around that, that I can tell. I tried all different types of clips, all the different import methods (for example drag / move, media browser, file > import), but nothing. It isn't even a matter of film - the same applies even if I just try to import images. Oddly, with grag and drop - method if it is a video clip, PP registers even how long the clip is, highlighting where the clip will insert - she normally would be - but then instantly crashes after abandonment and/or trying to read. This led to believe me (because I never saw a single visual image in Premiere Pro) there could be a graphic bug - potentially something wrong with my system.

  For any help or suggestion would be received with gratitude. I have attached to the report of crash below and some features of my system.

  See you soon,.

  Alastair

  MacBook Pro 15 "(Retina Display) - mid-2012"

  Intel Core i7 2.6GHz

  RAM 8 GB 1600 MHz DDR3

  OS X 10.8.2 (12 C 60)

  Intel HD 4000 512 MB graphics card

  Premiere Pro Version 6.0.2 (072 (MC: 264587))

  

  PS just Gunna do a full update of my Mac OS X to bring it up to 10.8.3. I doubt that this will fix the problem, but it's worth a shot, and if no bed I'll let you all know.

  Hey everyone just updated:

  I think I've solved the problem!

  No idea what it was, but it would either have been:

  (a) restart my MacBook (unlikely!)

  (b) update the firmware from Apple

  (c) update the Apple Retina Display update

  (d).. .the above all of that!

  He actually started to work before you go on 10.8.3, so not associated with OS X.

  In this case, my apologies for the long post - hope it helps everyone in the same situation in the future. Moral of the story: the Apple software update!

• Premiere Pro CS6 any data 'Date Created'

  I studied this background in Adobe and public forums without seeing a similar discussion. I have a folder of .mts clips shot in AVCHD on a Sony HXR-MC2000. I can import or drag-and - drop clips and they come into my seq very well - obviously a recent update, I have installed has tackled the problem of no audio import with the clip, thank you, Adobe!  But for the life of me, I can't have the "Date Created" coming with the clip info. I have this box checked in the Panel PP6, but not these data imports.

  Any ideas?  I am running CS6 6.0.1 on an iMac running OS X 10.8.1 Mountain Lion

  Hi Miltko,

  Using a Sony SLT A37, can't do PrP to include creation or modification dates in the data of the project file. That is why the yet more general shortcoming. I would like to hear from users of Nikon and Canon.

  You can add these metadata in first Pro CC 2014.2 from now thanks to the display of the metadata > base. In the next release of Premiere Pro, metadata will be sortable in the project Panel (it's not currently). I tested it and it works fine.

  I also tested Premiere Pro CS6 and "Date Modified" and "création Date" metadata are sortable in this version with some standard .mov files I have in hand right now.

  If I understand correctly, all the metadata in the project Panel will be sorted in the next version. This is one of those unsung, updates that those of you on this post, will enjoy.

  Tip:

  To ensure that the metadata you need are included in Premiere Pro, please follow the standard advice: copy your SD card set to HD from your computer, and then import the files using the media browser. This way your audio, timecode, dates of creation and modification dates will be imported.

  If you have followed the standard procedures and you still do not see the metadata, file a report bug here: http://adobe.ly/ReportBug

  Premiere Pro CS6 allows users the Date of creation and update metadata for sorting by date, if your device is supported for use with CS6.

  Thank you

  Kevin

• Premiere Pro CS6 is no longer available?

  Hello

  I have a client who is willing to burn me a DVD of their marriage, and I wanted to use again. However, I noticed that he was not a part of the cloud creative and discovered that it's included with Premiere Pro CS6. I had it installed on my computer, but has not yet had for some reason any. So I uninstalled Premiere Pro CS6 my computer, just to see if I would get the opportunity to install even if I reinstalled Premiere Pro CS6. But now, when I look into the creative cloud app, I can not even find Premiere Pro CS6 to install. I looked under the tabs 'Previous Version' so much 'find additional Apps', and it is not found. I will not be able to install more the Premiere Pro CS6 on my computer? Any help I can get would be appreciated, since I still have some projects I used CS6 with.

  If you have a subscription for CC, then you also have the Premiere CS6 and again.

  How to find again:

  

• New Version of Creative Cloud Desktop App does not display preview Versions of Premiere Pro CS6

  As a user of CC I uninstalled Premiere Pro CS6 from my PC. But unfortunately, I wasn't aware that CS6 still got also uninstalled. Now my question: is it possible to reinstall. I know it's possible with the old version of the creative cloud under 'previous versions' desktop app, but I can't find Premiere Pro CS6 more in this list.

  [Please do not double post, another thread deleted by mod]

  

• Help with 3.5 hour, 2 video disc with still and Premiere Pro CS6?

  I need to publish a DVD 2 disc set (with menus on both discs), because the final length video in Premiere Pro CS6 is about 3.5 hours. In the past I just sent my large video file to an editor, and they put my file on 2 discs. But now I'll be self-publishing and the need to know what is the best way to create my DVD. I have Encore CS6, but cannot find a way step over the images between two discs. What do I have to split the video into Premiere Pro, then send it to yet? Or export the file in full size/resolution of the PP and it is separated into yet?

  And what settings should I use in PP and yet?

  BTW, I'm on Windows 10, so I don't know if I need Quicktime to DVD (cannot install on Windows 10). Thank you!

  Option B WINS.

  What is the length of the program? Don't forget to use 560/minutes or a bitrate calc to fill as many disks as you can for a better quality, no sense given the empty space (unless the program is less than an hour, then it is inevitable).

  Thank you

  Jeff

• New MacBook Pro GPU compatible for playback in Premiere Pro CS6 Mercury engine?

  I am considering buying a new MacBook Pro (15 in., processor 2.8 GHz quad-core Intel Core i7, 16 MB of RAM) to mainly video edditing with Premiere Pro, I have the CS6 vertion. I wonder if its Mercury playback engine support GPU?

  The laptop I think uses this two graphics cards:

  • Intel Pro Iris graphics card
  • AMD Radeon R9 M370X with 2 GB of GDDR5 memory

  In the list of system requirements for first Pro CS 6; Premiere Pro system requirements for Mac OS and Windows is said "AMD over-pants" recommended for Mac and AMD Radeon GPU Acceleration (as the Mac comes with) is listed under Windows. This makes me wonder if the new Mac support the maximum speed for the Mercury playback engine?

  In any case, I would appreciate your views as oppon whitch GPU card you guys recommend for a MacBook Pro work best with Adobe Premiere Pro CS6?

  Hello

  Only these cards are supported for CS6

  • AMD Radeon HD 6750 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
  • AMD Radeon HD 6770 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)

  Premiere Pro system requirements for Mac OS and Windows

  Vinay

• Earthquake when the video is played in Premiere Pro CS6

  Hello, everyone! I started using Adobe Premiere Pro CS6 a couple of weeks for a project. I, that I am not really known to work with this software, so you might find my question a bit silly. However, I do not know how to fix and I would be grateful if someone can help me.

  The problem: when I start to watch the video to see how good the video is, the screen as if shaking a little. What makes the whole video blur kind. It is almost imperceptible, but still I don't like. When I stop the video by pressing the space bar, the picture is clear. How can I make the entire played clear when video and eliminate this blurry mess.

  Thanks in advance for your help.

  Is your program monitor configured to display the resolution during playback quality?

  

  MtD

• Button open does not appear for Premiere Pro CS6

  Hello world

  I just download Premiere Pro CS6 in the creative cloud. It's in the section of installed programs now, but there is no button to open it. It just says: "up to date".

  Anyone know how to open it?

  Thank you.

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Cannot disable the Premiere Pro CS6

  I am trying to disable Premiere Pro CS6, but the option in the menu "help" to disable is grayed out. I did all the updates to the first. Any help is appreciated. Thank you!

  If it has been activated?