Bug report? The conditional regions affect the provision of grid

Similar Questions

• By matching SQL reports in a region so that all the top edges are aligned

  I have 3 parts of SQL report in column 2. I want to display so that their top edges are aligned.
  
  Approved 40 report conditional Tests (column 2)
  60 unlicensed tests conditional statement (column 2)
  80 approved count by Build report (column 2) conditional
  
  What actually happens is that the reports are all centered vertically towards the middle of the largest report (above). Here's a raw ASCII picture:
  
  Tests approved
  Category #.
  Area 1 100
  Area 2 100 * unapproved Tests *.
  Category in box 3 100 # * approved number of construction *.
  Area 4 100 area 1 50 11.0.1 700
  Box 5 100 area 2 50
  Field 6 100
  Area 7 100
  
  As the report the leftmost is the highest, two other reports eventually centered vertically in the middle of the report to the left.
  
  Instead, I would like that all the top edges lined up like this:
  
  Approved tests Trials not approved Number approved by build                           
  # Category 11.0.1 # 700
  Area 1 100 area 1 50
  Area 2 100 area 2 50
  Area 3 100
  Field 4 100
  Field 5 100
  Field 6 100
  Area 7 100
  
  Nothing I have tried so far has worked. Someone has an idea how to do this? Thank you...

  You could try to wrap areas in the regions of html that essentially give you the ability to specify a valign = top for parts of report.
  Thus, your zones to look like this:

  30 report start - contains source = (div) region

  Approved 40 report conditional Tests (column 2) Contains 45 report 2 - Start

  60 unlicensed tests conditional statement (column 2)

  Contains 65 report 3 - Start

  80 approved count by Build report (column 2) conditional

  85 end - report ".(mobster) »

  Replace the rafters of)

  There may be a more elegant solution with models or level of CSS page or something...
  But it should work.

  Published by: Bob37 on Sep 17, 2010 15:33

  Published by: Bob37 on Sep 17, 2010 15:33

• Is this bug reports Oracle - 'break the order property' in the report "above.

  Is this bug reports Oracle - 'break the order property' in the report "above.
  
  Anyone would confirm that in the report 'group above', we could only order the values in the column of brake with ' "nil" or "ascending" or "descending" provided by "pause command property? '"
  
  In the following example, "Dept" is brake column. Reports Oracle allows the values of the order in 'Dept' with 'descendant' provided by 'pause order property:
  
  Dept. 30
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  20 DEP.
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  Dept 10
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  or "Crescent" provided by "pause order property:
  
  Dept 10
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  20 DEP.
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  Dept. 30
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  I have to do:
  
  20 DEP.
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  Dept 10
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  Dept. 30
  employment ename salary
  xxx xxx xxx
  xxx xxx xxx
  
  Could I do it? Could someone confirm that we could never do this, or if so, how?
  
  Million thanks for the advice.
  
  M.Z.
  
  Edited by: jielan 18 September 2010 08:23

  Why must be a bug? You have a customs provision and must find a way to fill. But, what is your real sort order? You have only the three departments? If so, you could add a column in your query as

  DECODE(DEPT,  20, 1, 10, 2, 30, 3, 4) SORTING
  

  put this column in the same group as dept and sort after this new column.

• Apple does not not in the bug report

  I have an open with Apple (number 23682041) bug report (subject of a problem with worms backward compatibility of the isochronous USB asynchronous in El Capitan).

  I posted about 1 month ago. Apple never responded to it somehow.

  There are other people here who have had this experience? Has been the bug picked up by Apple after 1 month?

  They will not contact you unless they need additional information. Any fix will happen simply in a later version of Mac OS X.

• Detailed information on the filing of a bug report?

  It has been suggested that I have file a bug report on the problem with an app that seems to be specific to the Moto E2.

  Before I dive, is there a description of just how a bug report should be structured, or something like that?

  I'd hate to present one that is not useful, or find myself in the middle of a deposit and find he's asking me something I can't lay my hands on, especially since I have to file the bug report using the phone itself.

  Android has a built-in bug report feature. Just follow these steps to use it.

  1 activate the developer options by going to settings / phone connection and press the version number several times until it says "you are now a developer."

  2. go to settings / Developer options and turn on USB debugging. You should see a prompt with more information. on the USB debugging.

  3. Select 'Take bug' at the top of the developer options. The phone will vibrate once when you select 'Report' and it will take a minute or two to complete. The phone vibrates twice as much when it's done and you will see a notification icon.

  4. Select what you want to do with the report in the sharing dialog box that appears.

  Looks like that it stores the output of several commands (for example, top, ps, dmesg) with various command line options in the text file. There is an option to add a bug report shortcut menu press and hold power button, which might be useful if you are testing an application and want to search the log for a specific timestamp.

  I hope this has been helpful!

• Bug in the conditional for loop with an array empty

  There seems to be a bug in the loop with a conditional terminal.

  If an empty array is connected to an indexed table auto entry tunnel, a tunnel of output array has an element instead of zero.

  

  The constant matrix is left empty.

  High loop without the conditional Terminal produces an empty array.

  Conditional down with a terminal loop never true generates an array containing a single element

  Thanks to LabVIEW version 8.5

  
  

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• small bug in the FLUKE PM668x driver, where the report?

  Hello

  just stumbled upon a minor bug in the FLUKE PM668x driver provided in the section of the driver.

  One ',' too in a format string in a cfg - vi to config: 6681 to a closed totaling.

  Where to report?

  However, I add the vi has changed.

  Hi Henrik,

  Thank you for reporting this issue, we have updated the driver and will soon issue the update.

• How to report a bug in the SMB's Windows Protocol?

  I found a bug in the SMB's Windows Protocol. (Share files)

  How can I report this to Microsoft?

  Dmitry

  Hi Dimitri.

  You can publish your comments on the Microsoft Connect Web site.

  Microsoft products accepting Bugs and Suggestions | Microsoft Connect

• That supports the Z3v? How to submit bug reports?

  I love my Z3v, but I met some important bugs with the firmware and software. What is the best way to apply a report and/or characteristic bug?

  Besides, which officially supports the phone?  I tried to report a software bug to Verizon and they directed me to the manufacturer of the phone (Sony).  I then tried to get assistance through Sony and the alleged support rep, because the Z3v is a model specific to Verizon, Verizon could only support me.

  Jean-Claude is correct since the Z3v is one inflated to Z2 made exclusively for Verizon. That comes with all the bloatware of Verizon. Updates the phone yo stand out Verizon, if you need to contact them

• BlackBerry Smartphones Bug report: appointments that disappear in the calendar BlackBerry (Android)

  I have a writing a bug report on the BlackBerry (ver. 1.3.1.11404) calendar application for Android, running on a BlackBerry PRIV STV100-2 with Android 5.1.1 Lollipop.

  This bug is reproducible 100%.

  Synopsis: Zero minute appointments disappear to weekly view and the view of the calendar day when the zoom level is decreased enough, if the appointment of zero minutes is followed by a longer appointment.

  Steps to reproduce:
  (1) create a new appointment with the identical to its start time end time (for example, start at 09:00 to 09:00).
  (2) create a second appointment the same day from 30 minutes later, a period of one hour (for example, start at 09:30 to 10:30).
  (3) the day in day view or week view.
  (4) pinch-zoom in and out. The first appointment disappears from view when you zoom in enough. It reappears when you zoom in.

  Note: The use cases for the appointments of zero minutes is to store the reminders.

  Thank you @jonmorrow

  I have reproduced and shared internally

• Smartphones blackBerry how to report a bug in the operating system or HW?

  Hi all

  I would like to know how to report a bug in the operating system or a bug of the HW? Post a message here looks like post it anywhere... If there is a serious bug in the operating system, how can I report on BOARD?

  Boris

  borisporosin wrote:

  I would like to know how to report a bug in the operating system or a bug of the HW?

  [email protected]

  borisporosin wrote:

  Post a message here looks like post it anywhere...

  Correct - this forum is a support system-based user community. ON-BOARD staff rarely participate and check no reports of bugs here.

• Smartphones blackBerry is RIM read these messages? Where should I post the bug reports and suggestions for BB8900?

  I wonder where I should post the bug reports and suggestions for BB8900? I think that we have already found several bugs enjoyable device it is, but I've never seen any work email address to send these discoveries. I have also some proposals to improve the BB8900 features, making it even more attractive with minimal effort. We can actually open a new thread here and I can start posting bugs that I knew, but I'm not sure that everyone from RIM never reads these postings. All good ideas? Or maybe there is some forum tht could be used for this purpose?

  If you have any suggestions and information on RIM BlackBerry platform then post it here:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=PM_Dev_Board

• Click on the poster conditional regions based on the button

  Hello. I have 2 reports interactive report A and B report and a button named Switch.  What I want to do is, when I run the page I want to show the report and when I click on the button I want to display ONLY report B. What I did was, for the report one I made it not conditional so it appears when I run the page. Also, I added a request for switch as 1 and I have added condition for B as report

  
  

  Condition type: request = Expression 1

  Expression 1:1

  What happens now is, when I run the report page is displayed as expected, but when I click on the button of the switch B to the report of poster report. But I want to display only report B when I click the switch button. How do I achieve this?

  Report must be conditional, such demand needs to NOT be the same as the b button...

  Thank you

  Tony Miller
  Los Alamos, NM

• Bug in the SQL Developer report where?

  Where can I report a bug in the SQL Developer? It is possible at all?

  I use Ubuntu 14.04 (32 or 64 bit) with Oracle VM 1.7.55 and get a SIGSEGV vm.

  Thank you

  Diogo Sant

  If you have database support through MyOracleSupport, you can report a bug there.

  If this isn't the case, then this is the place, although nothing is guaranteed.