Bug status definitions

Similar Questions

• Bug status extreme online!

  Hello

  I already pointed this bug several times to the Skype support, but it doesn't seem to be * beep * ING still attached!

  Sometimes when I use modern Skype, and then I stopped (I say * beep * ing closed, no not only put to sleep!) my device Windows 8, I've always stuck with the status online! So even when I login and log off the desktop version of Skype, I always * beep * ing stuck online?

  Is Skype team is even remotely how serious issue it is? I had trouble with about 5 of my friends as they if I don't just talk to them! I don't have. I didn't even know that I am online, because I wasn't! My two devices were completely closed.

  This shit should be fixed as soon as POSSIBLE. Since Skype was bought by microsoft, it's getting only worse and worse.

  Now I have to keep explaining every Single out of my 100 contacts that I'm not a jerk, is it just Skype under development by incompetent people

  Not only can I not log out of Skype modern because he grew up in my Microsoft account like a tumor, but now I have apparently also never can't FFS offline.

  It's certainly a BUG in the poor implementation of cloud-based e-mail service.

  https://support.Skype.com/en/FAQ/FA12381/what-is-the-cloud

  In the meantime, you can try the "/ remotelogout" command cat.

  https://support.Skype.com/en/FAQ/FA10042/what-are-chat-commands-and-roles

  /remotelogout

  Disconnected all other cases except the current one. This will also stop push notifications on all other cases.

• BUG status: File.deleteOnExit () does not work on open files (win32)?

  I'm a bit confused about the status of the below bug:
  
  http://bugs.Sun.com/bugdatabase/view_bug.do?bug_id=4171239
  http://bugs.Sun.com/bugdatabase/view_bug.do?bug_id=6357433
  
  Is fixed? I use jdk1.6.0_25 32-bit on a 64-bit windows computer 7 where I create a temporary folder:
  

   
  
  
      File tempDir = File.createTempFile(name, "");
      if (!(tempDir.delete())) {
        throw new IOException("Could not delete temp file" + tempDir.getAbsolutePath());
      }
      if (!(tempDir.mkdir())) {
        throw new IOException("Could not create temp file" + tempDir.getAbsolutePath());
      }
      tempDir.deleteOnExit();

  It works fine if the folder is empty. But if I put a test.txt file in the folder created its not deleted on exit. DeleteOnExit() works only on empty folders?

  Yes, what I said above.

• minor bug: status of dynamic Actions is not displayed correctly when DA disabled

  Hello
  
  It displays 'Parole' instead of 'Never' to the page of the Page definition.

  Hi Edward,.

  Thank you us report this, I agree, it should be compatible with other types of component and display "Never" in this situation. I submitted the bug #10149191 for this.

  Just to note (and I'm sure you're already aware of this), but it is not inconsistent in 'View of the component' on the definition page. In "Tree View", you see the name of the component in italics if it is conditional and then hovering over it you can see that the type of condition is 'never '.

  Kind regards
  Anthony.

• BUGS status on images display

  Hi all

  This is the last MUSE CC2014.1 update function allowing changer nei of an image according to the position and action of the (STATE) cursor works like.

  Indeed on projects already created and again if you want to add a shadow of door on an image when there is the overview of the cursor that does not apply.

  Please pour your help

  We have provided a fix today, please try to install the last update and then check.

  Thank you

  Sanjit

• Cp6 - Bug? Definition of the name of the slide does not always work

  At first I thought that I made a mistake when I noticed that the slide name did not (and returned to the default value or anything that was already there).

  I learned that I should click outside the name box to 'set' the name of the slide. However, I now notice that set a name for the slide doesn't always work, despite all efforts.

  To get a name of the slide to 'stick', sometimes I have to click on another slide, then go back and repeat the steps.

  Everyone has noticed this in 6 Captivate?

  Is - more coherent if you change the label of the slide, and then press ENTER.

• What is the reason for closing OAV46981 Bug 17911277 AVCLI REGISTRY firewall FAILED

  Hello

  I encountered a problem during the registration of a dbfirewall with a vault of Audit Server. both run on different servers 12.1.2.3.0 (vbox would be that this is a test)

  the error I get is:

  
  

  FVO-46981: unable to connect to the database with the 10.10.10.90 IP firewall. ORA-06512: at "AVSYS. ADM", line 4 ORA-06512: 'management. RA", line 355 ORA-29273: failure of the request HTTP ORA-06512: at"SYS." UTL_HTTP", line 1130 ORA-29024: certificate validation failure

  So it seems to start with the CESTAMP failed validation

  I found Bug 17911277 OAV46981 AVCLI firewall REGISTRY FAILS, but apparently not closed a bug (status 92) and I can see why (because the lines that explain it do not appear for me).

  someone has encountered this before and found out the reason?

  Thank you and best regards,

  André

  You can check the time of the AV and FW servers?

  If they are not synchronized, you can get in this situation.

• 12 Firefox was a total disaster. There was an error of analysis 527 33 column online and I couldn't do ANYTHING. RELOADED and same error persists.

  Never, I'll upload a new version of Firefox until two or three weeks following its release.

  Please can you have an option to revert to a previous version on your Web site as the download version 12 was a nightmare for me. I lost programs, I lost my nephew (who is in it) and connectivity and I spent 5 hours trying to fix the problems. V12 has been very bug and definitely NOT ready for release.

  I learned an important lesson and it's not immediately download a new version of a software. Wait for the bugs to sort!

  Using an older version of Firefox is not recommended because there are several vulnerabilities that are well known and exploited in the older versions. Only the current version is secure.

  However, you can wait until Firefox 13 comes out on June 5, install this version, and if you are still having problems, try the new Firefox reset feature that corrects several problems in Firefox in a single click. Refresh Firefox – reset the parameters and modules

• [SOLVED] config.pri includes several times same file cpp

  Hi all

  as written in the subject I do not know how to resolve this because the .pri file is generated automatically and I don't know if it just searches for .h and .cpp in the project files or it are generated after understands it I used in the code.

  Knowing that I can understand if it is a mistake of mine or a mistake of generator .pri 'simple '.

  Several times, I discovered this .cpp file in the chain of tent SOURCES to solve a linker bug multiple definition...

  Of course, I can comment on the (config.pri) include in the .pro file and copy the .pro content .pri file I can change by hand, but I prefer to understand the reason for this bug to avoid manually changing the .pro file every time that I add something (header or file CPC) in my projects.

  Thank you very much in advance for your answers :-)

  Solved! The problem was caused by something wrong in the way of exclusion in the path option and the symbols of the project property :-)

• Import Images from the PS and LR problem

  Hi all

  Since my last update App, I experienced some problems when you import images from LR into PS

  1. where, in LR, I select 2 or more images of 'open as layers in PS', I get a Pop Up telling me that I need the latest version of Camera Raw... It is up to date according to my account.

  2. once I finished with the photos in PS and save them in LR... the final image is ebb in different areas of the strip of film...  Sometimes it is the first image... sometimes, it's the last image...  I have the set to Capture time.  It slows down my work flow in organizing my photos.   I photograph the real estate and the placement of the final images is crucial.

  All the tips are greatly appreciated.

  Thank you...

  Brian

  This bug has been recognized by Adobe.  Please add your vote me too, and the details of your problem to this bug in the Adobe official feedback forum report: Lightroom: sort by Capture time. Community customer Photoshop family . He will make more Adobe likely to give priority to a solution and inform you immediately when the bug status.

• Do not have access to the BugDB - table 'rpthead_history' and 'bug_user '.

  Hello
  
  I prepare a report analysing where same query works in SQL Developer, but it does not work on APEX. Database link has been granted previously to the workspace and the following diagram:
  
  APEX workspace: OIEDEV
  APEX scheme: OIEDEV
  
  Error States:
  ========
  
  ORA-00942: table or view does not exist
  
  Question:
  ======
  Is this schema of database link was created has no access to these tables - "rpthead_history" and "bug_user". So in this case, what to do?
  
  SQL query:
  =======
  
  Select r.programmer "assignee."
  r.RPTNO "Bug number"
  r.Status "Bug Status",
  r.cs_priority "priority."
  r.upd_by ' latest update of "of rpthead@bugdb r, rpthead_history@bugdb u h,bug_user@bugdb
  where product_id = 397 and
  r.rptd_by <>'ARU' and
  r.cs_priority < 3 and
  r.programmer = u.bug_username and
  r.UPD_DATE > sysdate-7 and
  r.Status > 30 and
  r.Status not in (11,10,30,40,51) and
  h.old_status in (11,30,40,10,51) and h.new_status > 30 and
  h.new_status not in (33,40,51) and h.upd_date > sysdate-7 and r.rptno = h.rptno and not exists (select null from rpthead_history h1 where h1.rptno = h.rptno and h1.upd_date > h.upd_date and h1.new_status in (11,40,51)) order by 1
  
  Thank you
  Riou

  Hello

  I think that this public forum is not place question about internal Oracle tools?

  Kind regards
  Jari

  -----
  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• Photoshop CS6 does not recognize my NVIDIA GeForce GTX 675 M GPU?

  I just bought a brand new Alienware M17x R4 with Windows 8 Pro x 64 and Photoshop CS6 does not recognize my NVIDIA GeForce GTX 675 M GPU?

  I've already updated Windows 8, Photoshop and graphics drivers from Nvidia.

  Any ideas?  I spent so much on a nice graphics card, but now it seems that PS CS6 cannot even use.  It uses rather the HD4000 Intel:

  

  I also tried this: http://forums.Adobe.com/message/4545768#4545768

  And remove the settings, but that didn't help.

  According to this, my graphics card should work, it's an NVIDIA GeForce GTX 675 M, which is a 600 GPU series: http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-GPU-FAQ.html#tested_cards

  Tested for Photoshop CS6 video cards

  Adobe has tested the following video cards before the release of Photoshop CS6. This paper presents the video card in the series. The minimum amount of RAM supported on video for Photoshop CS6 cards is 256 MB. 13.1 Photoshop cannot display features 3D if you have less than 512 MB of VRAM on your video card.

  Important: This document is updated as newly released cards have been tested. However, Adobe cannot test the cards timely. If a video card is not listed here, but was released after may 2012, you can assume that the card will work with Photoshop CS6.

  Adobe tested laptops and desktops of the following cards versions. Don't forget to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names).

  nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series

  I'm out of ideas.  Any suggestions?

  So, I thought about it... duh.

  

  My bad... or rather, Nvidia is bad!

  In their app Profiler, they set Photoshop to use the settings "by default", which defaults to the built-in graphics card.  By changing the profile so that it uses the discrete graphics, it worked!

  It also fixed my issue of the flashing background / flicker.

  I know it's a bug known with Windows 8 + AMD (http://helpx.adobe.com/photoshop/kb/image-background-transparent-or-flickers.html)

  However, Adobe should look at this same bug occurring with the HD4000 Intel Integrated GPU, because this happened with my laptop.

  Maybe this bug does not occur on systems that don't have a GPU integrated, but on systems with Optimus, that's certainly a reproducible issue.

  When I go to integrated, the question pops up again.

  It's nice that Nvidia offers an option for us to use the graphics integrated or discrete, however, Adobe must proceed and make sure that Photoshop doesn't wig when we use the Integrated GPU.  Sometimes, your customers need to do work on the energy of the built-in battery, so the flicker /flashing / transparent background bug should definitely be fixed.

  Personally, I can get 6 hours out of this laptop that runs the built-in GPU, but when I use the discreet, he cut down to only 2 hours.

• Bug report - classic report lov definition retained when it is no longer relevant

  Hello
  
  In January, I spotted a case where, the attributes were selected after a selection has been changed, and related fields are hidden in the dev environment.
  http://www.grassroots-Oracle.com/2013/01/dynamic-action-hidden-false-actions.html
  
  Anthony Rayner asked me on twitter for more examples, and I just found a.
  
  Classic report - display of the column as "list of selection (query based lov).
  Add sql LOV.
  Replace 'report type column' or 'display as text... '. ', save.
  Change to 'select list... ". '--> lov definition is displayed again.
  
  I actually founded it after assigning the column standard report column, then copy the page - the LOV was present in the new page!
  
  Scott

  Scott,

  Thank you for following up on that. I submitted the bug #16482841 to do this, which will be reviewed at the next major release.

  Thanks again.

  Kind regards
  Anthony.

• Definitions of color or return bug really UI design?

  Hello

  Here are a few simple steps to demonstrate what I think, it's a bug.  Can anyone confirm a bug and if Adobe knows about it?  I can't find anything in their database on this subject.

  1. open the display > colors > definitions dialog box, set the values of % CMYK 100, 43, 0, 0, and click Add.

  2. from the drop-down list of libraries of colors, select Pantone not clothed, type 300, click done.

  Note % CMYK values have not changed, but the color chart of course.

  3. then type 100 just on top of the Cyan 100. Corrects the color chart.

  This is a bug in the library of the colors to RGB conversion routines, or a really bad UI design.  Do you know that? If the latter, can explain why the color of the screen must be different. I know that different CMYK values must be sent to different printers to achieve the same print color, but this should not affect the color you see on the screen.

  I need to know about this because I'm going to put in place a range of custom colors based on Pantone colors.  It would be nice to see the name of the ink: set correctly on the Pantone name, but this throws the waaaay displayed color screen.

  Thank you

  Dave

  PS.  I filed a bug with Adobe report to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform but they say they are not very often and I would like to know what is the story.  THX!.

  Dave,

  You can have a read by Tim Murray view available color in FM at: http://www.techknowledgecorp.com/help/color.html

  To display on the screen when you specify the Pantone color, you see the values defined by Pantone in the RGB. When you manually enter the CMYK values, you see algorithm of mapping FM conversion of these numbers in RGB. The calculation or library setting used is also controlled by the maker.ini for the GetLibraryColorRGBFromCMYK parameter setting.

  Colors of the screen will always be a little subjective unless you have gone through a calibration process. It is akin to telling me to use a setting of '3' on your toaster to get a specific shade of Brown on your bread toasted. If your toaster has 12 settings, mine has 7 and their powers are different, so you will never get what I get with this setting.

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.