BUG: transform-origin not properly set for Chrome v36

Similar Questions

• SIEBEL_STRING_REFCOUNT variable of environment was not properly set

  Hi all
  I'm having a problem with the results of the EVT.
  One of the EVT gives explanation as verification failure below
  SIEBEL_STRING_REFCOUNT variable of environment was not properly set
  Explanation:
  Make sure you that the Siebel "SIEBEL_STRING_REFCOUNT" environment variable which controls reuse memory consumed by the data string is not set.
  
  
  I tried to check support.oracle.com and Setup Guide, and Performance tuning guide. But there is refrence to this parameter in terms of best pracirce or a recommendation.
  
  Have a clear population of this parameter.
  
  I use Siebel 8.0 on Windows platform and have used the standard EVT.ini as in Doc-ID 477105.1
  Thank you-

  Hello

  I think that SIEBEL_STRING_REFCOUNT is an environment variable set to solve the problems of siebel and evt is to make sure, that it is not set. However, if you do not have this message or need additional information concerning this variable open a case in support.oracle.com asking for additional information.

  It will be useful,

  Wilson

• BUG: SlideViewTransition() does not properly

  I try to use one of the standard display transitions.  Basically I want a particular vision to slide to the right instead of the left (by default).  According to everything I read on the Adobe Web site and help pages, this should be possible using the SlideViewTransition() function.

  When I use the function, it says that I'm moving him too many variables.  However, when I look at the actual code in the project (Flex Hero > candles > Effects > SlideViewTransition.abc > SlideViewTransition.as) function indeed shows 2 variables to pass to it:

  public function SlideViewTransition(duration:Number = 300, direction:String = SLIDE_LEFT)
  {
       super();
          
       this.duration = duration;
       this.direction = direction;
  }
  

  NOTE: SLIDE_LEFT is a constant defined in the class that corresponds to 'left' (string).  There is also a constant SLIDE_RIGHT which is equivalent to 'right '.

  Initially, I tried the following...

  • SlideViewTransition (null, SLIDE_RIGHT)
  • SlideViewTransition (300, SLIDE_RIGHT)
  • SlideViewTransition (null, 'right')
  • SlideViewTransition (300, 'right')

  NOTE: The tested range is:

  navigator.pushView(views.MoBillTransactions, null, SlideViewTransition("right"));

  After receiving an error message stating that too many variables passed several times, I tried just a passerby.  Sending a number threw an error, so I knew, was not "term".  'SLIDE_RIGHT' or 'right' worked.  I'm sure it's a bug, since I can see the code function directly.  If not, can someone guide me in the 'good' sense? (pun intended!)

  -> Flash Builder "Burrito".

  -> Flex project Mobile (Android)

  -> Machine to Win 7 64 bit

  Cool, I see to help your hero, made me know how that works for you performance wise...

  in any case, I think the problem is that you need to instantiate using the new keyword, and then set the appropriate properties (time, data, direction) like this...

  protected function transactionsButtonHandler():void
  {
       if (!(navigator.activeView is views.Transactions))
       {
            if (navigator.activeView is views.ProcessTransaction) {navigator.pushView(views.Transactions);}
            else if (navigator.activeView is views.Settings)
            {
                 navigator.popView();
                 navigator.pushView(views.Transactions, null, new SlideViewTransition(240, SlideViewTransition.SLIDE_RIGHT));
            }
       }
  }
  

  I hope this helps...

• Why my bug reports have not been sorted for more than four months?

  https://Bugzilla.Mozilla.org/buglist.cgi?bug_status=unconfirmed & bug_status = NEW & bug_status = ASSIGNED & bug_status = REOPENED & emailassigned_to1 = 1 & emailreporter1 = 1 & emailtype1 = exact & email1=a.vanloon%40alexandervanloon.nl & field0-0-0 = bug_status & type0-0-0 = notequals & value0-0-0 = UNCONFIRMED & field0-0-1 = reporter & type0-0-1 = equals & value0-0-1=a.vanloon%40alexandervanloon.nl & list_id = 9847693

  I have tabled five bugs in November and December last year. To my surprise and disappointment, no one has been sorted or answered by the developers of Firefox OS. I don't know that they meet other reports of bugs. Does anyone know why this might be? Are there not enough developers to treat all the bug reports? Or y at - it something wrong with my particular bug reports?

  Thank you very much for your help Andrew and guigs2. Wish that was my time to help with the yard myself.

• USB MTP device drivers will not properly install for Samsung Galaxy S3 - Windows will not synchronize Galaxy S3 for computer

  Windows will not synchronize Galaxy S3 synchronizes a mobile computer.  When I attach USB cable the computer flashes added new hardware, but when you click the icon it goes in loops.  I've uninstalled and reinstalled the drivers in Kies and always the same problem.  All other cell phones synced to computer, including the Samsung Galaxy S3 but my iPhone no matter what I do.  When I open Kies and connect the USB cable there is no reconition of the cell phone.  I've seen a Code 31 error appear in good devices.
  Add questionnaires of the Add Hardware Wizard...

  SAMSUNG Mobile MTP Device (a yellow excamation sign)
               
  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  SAMSUNG Android ADB Interface

  This device does not work correctly

  SAMSUNG Mobile USB Modem

  This device does not work correctly.

  SAMSUNG Mobile USB Composite Device DeviceThis works correctly.

  This device does not work correctly.

  It is all the information I can give at the moment.  I forgot to mention I am running Windows XP I hope that helps also.  With everything says I don't understand why will not load the drivers required for this device.  For any help or suggestion will be greatly appreciated.  Thank you all

  Hello

  -What is the driver version you are using?

  The latest version is ver.v1.4.6.0 out June 19, 2012.

  I recommend you to please update the USB drivers on your computer and check if it helps.

  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  If this does not help, I would recommend you to please contact Samsung support for assistance.
  http://www.Samsung.com/us/support/

  There is a community forum for Samsung where you can ask questions.
  http://www.Samsung.com/us/support/owners/product/Sch-I535MBCVZW

  Hope this information helps.

• Repeat me udate was not properly configured for Windows Vista update (platform) _

  It is after it is downloading and restarting the computer.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Matlab 2008A path do not save set for Photoshop CS4 (Windows 7)

  Hello

  I recently installed Windows 7 and re-installed Matlab 2008A and Photoshop CS4 Extended. I have connected Photoshop and Matlab the defining a new path in Matlab, but after I closed Matlab connection no longer works when the re-opening of the program unless I put the path once again.

  Anyone had this happen? Is there a solution in addition to creating this way whenever I need to use?

  Thank you!

  Run as administrator! Obviously the data never gets written in the registry or a file in a directory system due to insufficient privileges. If this does not work, try the compatibility of the application setting.

  Mylenium

• Do not properly configure updates

  Updates download and install successfully.  But then I get the "Configuring updates" screen and it says that the updates were not properly set up.  The computer says then it's the return of the changes and then I don't have updates!  Someone at - it a solution?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Hyperic does not save configuration for WebLogic 8.1 Admin properties

  Hi all
  
  I'm using Hyperic HQ Server 4.2.0 running on CentOS 5.4 to monitor the Admin of WebLogic 8.1 under CentOS 4. I am able to connect server agent and monitor the performance of system (CPU, memory, applications etc.). AutoDiscovery is works beautifully, detect the areas of my WebLogic and the pathnames of the log files and startup scripts, leaving me the simple task of setting the username and password to access the admin server. But when I change these properties and click OK, all I get is the following error message after several minutes of waiting:
  
  The configuration has not been set for this resource due to: the Agent error: cannot connect to < IP of WebLogic Admin server >: 2144: reading has expired
  
  I have certified that the TCP 2144 port is open on the WebLogic administration server and so if it is accessible from the Hyperic HQ server. Other resources (CPU, memory, network, etc.) are monitored, so I do not understand why Hyperic said who is unable to connect to the agent.
  
  I appreciate any suggestions on what I can do to find out what the problem is. If I need to provide more information, such as the contents of log files, just ask for it.
  
  Thank you
  
  Davidson Paulo

  Hello

  Check this box... can help you
  http://communities.VMware.com/thread/355060?TSTART=0

  Hello

• Download "the default mail client is not properly installed" when I press a button on the site for email.

  Original title: default mail Client

  Sometimes a website has a button to send no given address. When I hit the button I get the message "the default mail client is not properly installed".  What does that mean? I do not see in any Windows mail information page.

  Saturday, September 27, 2014 00:43:08 + 0000, larry3000 wrote:

  Sometimes a website has a button to send no given address. When I hit the button I get the message "the default mail client is not properly installed".  What does that mean? I do not see in any Windows mail information page.

  Are you doing your e-mail on a web site? If so, you probably haven't
  set up a default email client. The e-mail client is the program
  you use for mail, not a website. Standard e-mail programs are
  Outlook.exe, Windows Live Mail, Thunderbird, strong Agent, etc. He
  are a lot of choices.

• Windows Live Mail error: the authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Live Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'.

  List of topics 'b - day.
  Server error: 554
  Server response: 554 Authentication Failed, must login
  Server: 'smtp.mail.wowway.com '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  How can I fix it?

  original title: 554 error when sending email

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

  I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

  Object "Marriot coverage."
  Server error: 550
  Server response: 550 must be authenticated.
  Server: 'auth.smtp.1and1.co.uk '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 587
  Secure (SSL): Yes

  Can someone help me please

  JO

  Original title: Email problems

  Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

  WLMail open

  Right-click on the name of the email account

  Click 'properties '.

  Click the [servers].

  "my server requires authentication" is checked?

  If it is not try to delay it and and see what happens then.

  Note that you may need to click the [Settings] button to enter the necessary info he needed.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Loading the main page halfway when Firefox starts - all other elements as the bar side and toolbars is loading properly. Height adjustment manually retains the setting for navigation all in session but don't remember setting when closing down.

  Height adjustment manually retains the setting for navigation all in session but does not remember to reset when closing down.
  Something was clicked inadvertently, but don't know what or how as Firefox worked fine a couple of days. Version 3.6.3. Help please

  Positions and sizes of windows are stored in localstore.rdf in the profile folder.

  Localstore.RDF to remove or rename the localstore.rdf.sav file in the profile folder to test whether the file is corrupted.
  
  See http://kb.mozillazine.org/Corrupt_localstore.rdf
  
  (attention: do not delete the localstore.rdf file in the Firefox program installation folder)

  Note:
  
  Delete the localstore.rdf file will reset the default toolbar customizations.
  
  You can rename "localstore.rdf' to 'localstore.rdf.sav' to test whether what it solves.
  
  Then, you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if she did not.