Build an installer
Hey guys.
My trial version of LabVIEW 2014 just ran and I can't build an installer for a .vi which includes the installation of data acquisition equipment so it can be run on any computer. The NOR cDAQ-9174 lets it read a digital signal which would give the speed of a projectile, once he crossed two laser diodes. I think I have all the necessary elements in the project file. Anyone would be able to create the installer for me?
Thank you very much.
Neil
I do not believe
Tags: NI Software
Similar Questions
-
Can not build an installer, because it seems to have deleted the files required
LabVIEW does not locate the Installer source of a component necessary to build this installer. LabVIEW finally found the missing element in the following distribution:
The distribution name: NOR-DAQmx 8.6, disc 1
Last known installation path: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-1Search source for NOR-DAQmx 8.6, disc 1 Setup and build your installer again.
Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:
CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_Build.vi > CDK_Engine_PromptForMissingDist.vi
Loading information of product deployment
Loading information of product deployment
Adding files to install
Makes adding files
Preparing to build the deployment
Copy of the products of distributions
Copy distribution "OR-DAQmx 8.6, disc 2" of: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-2\ to: C:\LabVIEW\DAQ\Pentium4_Loggers\builds\Installers\Data worm 23a\ P4 Logger ".
Deployment of the completed buildingI think I must have deleted the files required from my C drive.
(Updated)
This is now fixed.
I managed to resolve this, by a combination of download OR-DAQmx 8.6.1 from the Web site of NOR and NOR-DAQmx 8.8 disc installation.
-
Comment to build an Installer (setup.exe)
Hi all
Forum of this I am new in and I just finished my studies also lol.
I have a big project in labview with hundreds of VI.
I'd like to know comments create an installer to make my sweet distributable?
Basically, have a setup.exe icon which allows you install my sweet on any same PC not equipped with the LabView IDE...
Hello
There is a section EN it's better if you post available in French.
Otherwise your exe once built.
In build sheet, right-click New-online Installer
its a window or you Pourrat Configurator your installer that will do what you want
take the time to read what is asked and put the source files in the right place.
A +.
-
Hello
I use LV2010 32 bit, vision tools, database tools, Win7 64-bit.
I get the following error when I Isaiah to compile a Setup program. The executable file is based without any problem only the installation program:
CodeSignAPI.lvlib:Get signature String.vi error
Error: The time stamp authority URL specified does not point to a valid authority timestamp server or an unknown error has occurred.«"" "String of full appeal:»»"»
CodeSignAPI.lvlib:Get signature String.vi error
CodeSignAPI.lvlibign with Certificate.vi
IB_MSI.lvclassign_Setup.vi
IB_MSI.lvclass:build.VI
CDK_Engine_Main.VI
CDK_Build_Invoke.VI
CDK_Build_Invoke.VI.ProxyCallerLoading information of product deployment
**************
Requested abort.
**************
Error details:
**************
Loading information of product deployment
Adding files to install
Validation of...
Copying files...
Analysis of the files...
Updating files...
Build completed successfully.
Makes adding files
Preparing to build the deployment
Copy of the products of distributions
Deployment of building
Copy of the configuration files
Merged configuration database information
Definition of product information
Information for the developer settings part
Final construction of departure
Validation of...
Copying files...
Analysis of the files...
Updating files...
Creating a merged database...
Creating the Installer files...
Build completed successfully.
Copy of the additional installation files
Compression of the files in the installer
Deployment of the completed buildingAlthough the error message clearly indicate that there is something wrong with the section "Windows Security" of specifications you Installer, try to delete the settings in this section and see if it is created correctly, then if she doesn't know where to dig.
Good luck
-
Every app I have Edit and build seems to have a problem of App Builder for code signing:
Nothing has been edited directly in the IPA. App Builder using, each application that is edited and then uploaded as "Developer application (.ipa)" installs as stated above.
It's like building application server-side is adding / not to sign a code resource in the bundle.
Christophe,
Hi, thanks for following it upwards.
For this project I had accidentally downloaded the file hidden repo git in the ZIP downloaded on the App Builder. Apparently caused code sign questions. that although confused, turns out great as it would have been unfortunate for submitting the application with these artifacts.
Problem is solved, and I get is no longer this error.
-
Flash Builder 4: Installation hangs
Hello
just download Flash Builder 4 and try to install, but the installation hangs on display "install...". ». What are the causes of the problem?
I use Windows XP SP3.
Where did did you extract your Installer to? There is a known bug where a subcomponent hangs during installation on windows, when the path contains a space https://bugs.adobe.com/jira/browse/FB-26442leader.
Jason San Jose
Software engineer, Flash Builder
-
How to build an installer of many projects?
Hi all
LV 2009 + DSC
We have 4 different LV-projects. They all use the same shared variables libraries and settings files. The scale of these projects are so enormous that they cannot be combined in a project. Each project creates the own .exe file. The question is: How can I create such installer that combine these 4 .exe and also add shared library variables and parameters for the installer. Other words: when the installation program is launched it creates the folder data, library files, parameter files and add 4 .exe to the root of the installation folder.
BR, Jim
You can create a "Setup."
This setup would have 4 auto settlement records, associated with every exe file.
With the installer, you can add each autopopulating folder to your Installer.
Tone
-
Folio Builder impossible installation and tools on Master Collection CS5.5 Folio
No idea why these two errors when installing producer Folio and tools for InDesign CS5.5 Folio?
Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 0 warning(s)
ERROR: ASU has quit unexpectedly.
ERROR: Media DB Error : 18 -------------------------------------------------------------------------------------
The system configuration required
See the following help document: code installation 15 output | CCM, CS6-
http://helpx.Adobe.com/Creative-Suite/KB/exit-code-15-Installing-CCM.html
-
Build installer undefined error - 12 CDK_CreateNewWizard_Invoke.vi
Search in the forum without solution for my mistake. I tried to build an installer with LabVIEW 2009 and I have each time the same error undefined-12. Here what I did:
-J' made a very simple vi, build an application and Installer, the same error
-J' downloaded the evaluation version of LabVIEW 2010, same error.
-J' uninstalled DAQmx, same error
-J' uninstalled my antivirus, same error
-J' installed the evaluation version of LabVIEW 2010 on another PC, same error
I joined the window with LabVIEW 2010 description of the error.
Thanks for your help.
DO NOT USE THE SOFTWARE FOR ADVANCED SYSTEM CARE. He deleted something you need to do an installer.
-
Popup in lieu where build for the installer
When I build the installer, it popup the request of LV8.2.1 installation location.
I put LV8.2.0 CD and the CD of driver, all may not work.
Any suggestion?
Hi Turbot,
I tried a bit of searching in the forum. Please browse the forum below and see if you can solve the problem of the solution or not:
http://forums.NI.com/NI/board/message?board.ID=200&message.ID=18878&requireLogin=false
http://forums.NI.com/NI/board/message?board.ID=140&message.ID=23509
You can consult this KB:
http://digital.NI.com/public.nsf/allkb/C3666BA408F81E59862570D20056E692?OpenDocument
http://digital.NI.com/public.nsf/allkb/5C55288F366FC5CA862570F500680F7C?OpenDocument
Let me know if the article has solved your problem or not.
Sincerely,
Krisna Wisnu
-
Hello
Since it has many common files between two test programs, I built two applications in a single project. Then I need to build two installers for applications accordingly. I'm having trouble to add the second request in the second installer when I specify the source files in the Installer properties. When I select this pack of applications according to the specifications of construction, I can't add it to the destination for the Installer folder. When I second request pack and destinatioin selected times record, the up arrow (to add files in the left pane to the right pane) turns into grey (not clickable). However, I found that, if I select the first pack of application according to the specifications of construction, the arrow turns direct. But I don't want to add to the first application for my second application installer.
Everyone understands what I'm going to talk to? Looking forward to your help!
Thank you very much!
Spring
Hi Sam,
I went through all the pages and didn't see any product ID. What page do you see ELISA product ID?
The problem I had was on the construction itself. I had not gone far enough to install it.
After you remove the duplicate Installer and created a new one from scratch, everything worked as expected (from build for installation in the execution of the program).
Kind regards
Spring
-
Hello
Recently, I developed a simple application that needs VISA to read and send data from the serial port. When you try to build the installer, I gives an error about the source files of visa as an extra Installer. I have no media installation with me (I have just my laptop), so how can I work around this?
Thank you
The simple solution is to download the runtime of visa or directly and reinstall it, LV automatically updates the location of the installer.
-
I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...
Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.
Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.
You can find more details about it in this KB:
And to keep a copy, here's more information:
How to stop missing delivery Notification whenever I build an installer?
Best regards
-
I'm having a problem of construction of an installer in 2011SP1 of LabVIEW.
It has been a while since I tried to build an installer but it used to work properly and building executables still works fine.
Now when I try to compile the installer, I get "generation failed."
The possible reasons: error generating preview for my 3.1.7 Application.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference: CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing. Visit ni.com/info and enter the Info Code "" for more information. ***************** Error: An internal error occurred for which the cause is unknown. (Error code -41)***************** Error Details:Error in MDF API function: _MDFCommon_GetNextLogMessageError in MDF::GetInstance - MDF static instance is not initialized!*** End Error Report************** Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing. Visit ni.com/info and enter the Info Code "" for more information.
The really strange thing is that I'm using LabVIEW 2011SP1, I don't even have installed LabVIEW 2013, not even the runtime.
Where is the problem? Why is he still complain about LabVIEW 2013? Anyone seen this before?
Troy,
This behavior makes me assume that you updated certain components from the past. There are drivers of OR who use LV components (e.g., AFAIK the DAQmx of Test panels).
Update you things? If Yes, why don't you LV 2013 RTE installed as it would be necessary for full functionality of the driver?
Norbert
-
Cannot create an installer containing IMAQdx in 2014 of LabVIEW
I have a strange question in the generation of installers with a function IMAQdx in LV Application Builder 2014.
When I was building an installer for an executable file using IMAQdx in 2013 LV, Application Builder automatically selected additional installers needed and IMAQdx drivers (Vision Acquisition) were one of them. Now I'm trying to build the project even in 2014, but in the additional installers, I see only NOR-IMAQdx DURATION 14.0. When I build the installer in 2014 LV, the size of the file is about 300MB opposed to 900MB of the installer which has been built in 2013 of LV.
When I run the installation program from 2014 on a 'clean' Windows, install and run any application that uses IMAQdx, I do not see the cameras connected. This problem is fixed after manual installation Vision Acquisition software of DVD drivers for the device OR. After that, I can see all the cameras in the application and in MAX.
I tried to manually add additional installers in 2014 LV, but nothing helped. It seems to me that there is no way drivers IMAQdx bundle in LV Application Builder.
I found a post related to this and I wonder if someone can reproduce this behavior before dropping off a CAR. I have attached a simple project with a simple VI and installers of the sample in for testing. The VI allows you to select a camera (e.g. a webcam) and video image.
Hi martin.zmrhal,
What you see with only the Vision Acquisition Software runtimes (VAS) available in the list of installers extra is expected with the latest behavior.
Before Vision Acquisition Software (VAS) August 2014, programs additional installation to after-sales Service, namely OR-IMAQ, e/s NOR-IMAQ and NOR-IMAQdx not only includes the runtime components but also for LabVIEW application development support. GO August 2014 and later, now only allow us the deployment of runtime components. This gives the advantage of a substantially reduced Installer size, but you can include more support development (ADE) LabVIEW applications is in the installation program.
This change aligns Vision with LabVIEW behavior and most of the other products OR you cannot deploy generally support the complete development of a product, but rather only the runtime components. If you need to install GO with ADE on your deployment machine, you will need to distribute the complete Installer GOING on this machine in addition to LabVIEW (to make use of the SAV ADE support). To do this automatically, you will need to write a batch file to run the installer for LabVIEW, then IMAQdx.
With respect to the second issue of not being able to see the camera, I think that what you are experiencing is that the drop of the control Session is dimmed and you cannot click on it to see a list of the cameras on the system. It is also the expected behavior for the runtimes are going TO. This does not mean that the driver is not well that discovery of cameras, and you can test this by typing the name of the camera in the Session control (for example "cam0" for the first discovery of camera on the system).
What we are looking for with this behavior, is for vision applications deployed to abstract the end-users camera selection process. Ideally, your code must list programmatically cameras with IMAQdx list Cameras.VI and then determine what device (based on the type of bus, serial number, model number, etc.) to the target. We are working on an application note paper that clearly explain with some examples, but the idea is similar to this example of community for NI-DAQmx devices: https://decibel.ni.com/content/docs/DOC-10014.
I'm sorry for the current lack of documentation on these features, but without a doubt, we are working to provide examples useful and other items in the knowledge base at this address. I'll post a link to the content as soon as it is available.
In addition, Vision Acquisition Software August 2014 f1 went live yesterday: http://www.ni.com/download/ni-vision-acquisition-software-august-2014-f1/4974/en/. The patch is also available through the Update Service, and it is strongly recommended that you upgrade if you still use drivers of August 2014.
Kind regards
Joseph
Maybe you are looking for
-
There are mainly 2 peaks of the curve as the subplot in attachment 1. It should detect the point of division as the Red cycle. I tried to detect where the second derivative change of polarity to locate the point. But sometimes there sub such peak in
-
HP LaserJet M2727nf Seria: printer HP LaserJet series M2727
I have a multifunction M2727nf printer. After reinstaling software and try the analysis, I have a description "Choose a device:" WIA - HP LJ M2727nf Scan WIA - HP M2727nf Scan #2 LJ WIA - HP M2727nf Scan #3 LJ WIA - HP M2727nf Scan #4 LJ" How to remo
-
BlackBerry 10 MIrrorlink any time... soon?
I have a new car that offers Chevy / GM Intellilinktm, compatible with Mirrorlink. Any chance of getting a native implementation of IT / ML on 10 BBOS very next time?
-
I had a BB9900 for a few months and my e-mail, calendar, contacts and tasks were in harmony with the race of my company's BES. I downloaded several gift free apps in App World. Some of the apps require access to personal information on the phone. No
-
How to open a blank document to write my term paper?
Trying to end a cover document to write my book, where should I go [Original title: essay]