Installer build with VISA

Similar Questions

• Installation of NI-VISA and NOR-488. 2 on Mac

  I have a new Mac on which I am trying to install instrumentation OR (VISA and GPIB) pilots, and things don't work any tips would be appreciated. I downloaded the most recent version of these two (14.0 visa) and 3.0.1 for the GPIB, ran the installers (restart the computer between the two installed) and then tried to run the VISA configuration utility and the GPIB configuration utility to verify that the drivers were ok (at this point, no measuring equipment is attached to the machine (ultimately, the material will be a USB-> RS232 adapter and a USB-> adapter GPIB).

  The two configuration utilities crashed running. Config GPIB obtained in what concerns to the top of its window and then crashed a few seconds later; NI-VISA never even managed to finish to display the home screen.

  In reviewing reports of incidents, accidents seem to be in the OR-PAL driver at low altitude. The report indicates that

  / Library/Frameworks/nipalu. Framework/versions/1/nipalu

  Abort() called

  Poking around the list of files mentioned in the uninstall NOR-PAL guide, it seems that the kernel extension nipalk.kekt was not actually installed correctly (it is absent of/Library/Extensions and/System/Library/Extensions, and according to the uninstall folder, it should be present in both. I tried to copy the kext above a machine that does not have a functioning VISA/GPIB install, but OSX refused to load because it has not actually been installed.

  My plan right now is follow the uninstaller for VISA, GPIB and NOR-PAL and then try to run the installers, but I fear that I will end up in the same place. Y at - it something special or something needed to get these drivers to install correctly (i.e. should things be installed in a specific order, should I try to install VISA 5.4 and then do an upgrade installation 14, try to sacrifice a goat, stuff like that)?

  The material is a Mini Mac OSX 10.9.5 running.

  Thanks for any help.

  And just to follow up with a few additional details, I went through the same procedure on a second Mac that was fresh out of the box. When running Setup for NOR-488, one of the things that we tried to install was an "Update" the subsystem NI Core Services of pilots. This was despite the fact that the VISA facility has implemented a much newer version of the kernel drivers.

  Thus, it seems that the problem is that NEITHER-488 Setup does not correct version control before overwriting the subsystem of pilots. He obviously checked that the driver has been installed, since the action has been listed as "update" instead of "install".  At least in principle, running the installer of NOR-488 first, then the VISA installer should work, but for some reason some the only time where I tried in my tests, it did not work. Maybe, I haven't had a full work of sanitation among other failed attempts. Just for the record, is the sequence that seems to work

  (0) remove all traces of any agreement, failed to install. Follow the steps described in the files uninstall.txt for NOR-488. 2, NI-VISA and NOR-PAL. The uninstall for this latter guide is located in/Library/Application Support / National Instruments/NOR-PAL

  (1) perform a standard installation of NI-VISA 14.0. Restart the computer. Check VISA works (just run the config utility)

  (2) perform a standard installation of NOR-488. 2 3.0.1. Restart the computer. The VISA and GPIB crash when access

  (Optional) curse (2A) to the length

  (3) perform a standard installation of NI-VISA 14.0. Restart the computer. The VISA and GPIB should now be functional.

  Tested on a pair of 'Late 2012' Mac mini OSX 10.9.4 running. One machine was Labview 2014 before you install the drivers for the instrumentation, the other had not installed LabVIEW.

• CD read - Error Message: Build with Autorun CD Studio has stopped working.

  I am running Vista and have had no problems reading CDs or DVDs.  However, I have a CD of my teacher built with Autorun, who will not play on my computer.  I tried 2 different copies without success, but the 2 same CDs play on all computers in the school and on the computers of the other students.  I have Microsoft Powerpoint and Word, that are required to read the files on the CD. When I insert the CD, I get the opening menu, but when I try to select any specific topic, I get the error "Build with Autorun CD Studio has stopped working" message.  I have downloaded and run the Microsoft FixIt! Program diagnosis/troubleshooting of Microsoft Support, but he could not find any problems.  I need this CD for upcoming classes and don't know what to do?

  Hi pinkpugsy,

  1. are you able to browse the contents of the CD using Windows Explorer?

  It looks like Autorun CD Studio program is defective. We recommend you to uninstall and reinstall the Autorun CD studio software on your computer and check the difference.

  Note: before you remove the software, make sure you have the Setup file of software with you.

  Step 1: Uninstall or change a program
  a. see Uninstall or change a program
  b. Once you have uninstalled the program, restart the computer.

  Step 2: Install the Autorun CD Studio software. Once you have installed the program, restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My installation closes with a comment: Installation on case-sensitive drives is not supported

  My installation closes with a comment: Installation on case-sensitive drives is not

  Hi BillW707

  Please visit: http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html

• How to convert a table control connects with VISA

  As VISA can accept only string buffer, how can connect us a "Control Panel with VISA?

  
  

• HEIDENHAIN ND-287 connect with VISA

  Hej

  I am a student and I want to connect the ND 287 of heidenhain with VISA and labview is it possible?

  
  

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  How to install Win XP on PC with intel i3 processoe running win7

  Hello

  I'm working with a legacy system. My programs to work with Windows XP and more excellent only.

  Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.

  I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.

  Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.

  Can someone help?

  Hi Steve,.

  You can follow this link & check if the problem persists:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  
  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  If the problem persists, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I'm waiting times tries to access a parallel port with VISA

  I get VISA time-out errors when you try to write to the parallel port. MAX said that the port works and I should be able to communicate with him. Device Manager Windows 2000 also said that the device works. I use writing to the parallel port with VISA example I found on the site of nor. To make it even more confusing (or), it runs on one computer but not another. All software and drivers are the same on both machines. On one who gives me the error of time-out, I am able to write to the parallel port using "accesshw".

  What a coincidence. The computer that I had problems with is also a Dell Optiplex. The pins of wiring together the way that you have specified has solved my problem of timeout. The cable I got with just bad has terminals 11 and 12 low attached as indicated on the page with a link to the code sample titled "with the help of VISA to access the Parallel Port in LabVIEW" I know why the original cable worked with a bridge but not a Dell Optiplex. Thanks for the quick fix!

• OfficeJet Pro 8610: driver installation fails with an error on hpvyt13.inf persistent 1627

  The printer driver installation fails with:

  Setup error

  Call to DrierPackageINstall returned error 1627 for package
  "C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"

  Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).

  Hello

  This can happen for several reasons, most common duration to a problem with the registry permissions.

  I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):

  http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html

  Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.

  Then try to reinstall the HP software and check for the difference.

  If the same continues I suggest contacting HP sopport to continue such troubleshooting.

  You can find the detais contact for your region below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Hope that helps,

  Shlomi

• JO 3830: Device Installation failed with 2081883393

  Hello

  I tried to install my printer but cannot go beyond the part of network installation.

  Printer is connected to a Wi - fi connection, PC sees the printer and found during the installation process.

  But there is this error code in the log file:

  "Device installation failed with-2081883393.

  How can I get my printer to install correctly?

  I can't even install it via USB and I tried all the steps in the Troubleshooting FAQ.

  I also tried all the steps of this thread:

  http://h30492.www3.HP.com/T5/Drucker-und-all-in-one-GER%C3%A4te-installation-und/HP-8620-Netzwerkins...

  Please help me I am desperate.

  Concerning

  PS Fax and scanning has been installed properly, then scanning works. Print to the printer also works. Only install under win7 print driver is buggy.

  Hi 8lives

  Thanks for the quick response and the link. Unfortunately, these measures have nothing to solve the problem.

  But I found the solution myself:

  the system variables %tmp% for the temp folder when incorrect. I removed a disk on which I had the temp folder, and Windows do not rewrite these variables.

  1 Control Panel > system > advanced system settings > advanced > Environment Variables > System Variables

  2. change E:\Temp in C:\Windows\Temp for 'Temp' and 'Tmp '.

  I hope that maybe I can help someone else with this solution.

  Kind regards.