Build process fails with the error 'and not an executable valid '.

Similar Questions

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

  Hi all

  The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key.  Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
  I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.

  Hi Vincentand welcome to the VMware communities!

  This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry.  Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?

  See you soon,.

  --

  Darius

• Conversion fails with the error: COULD not: - ERROR - convert: converter.fault.FileCreationFault

  Hello, I try to convert a windows 2003 server of citrix server to vmware (the last of them succesfull 20).

  The job runs up to 95% one error:

  "Create von ' \\.\vstor2-mntapi10-shared-D587D58700001000000000000B000000\$Reconfig nicht possible."

  Logfile by saying:

  2013 04-07 T 14: 14:20.752 + 02:00 [error 12632 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.FileCreationFault
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [task, 379] [task-72] - ERROR - convert: converter.fault.FileCreationFault
  -> (converter.fault.FileCreationFault) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> file = "\\.\vstor2-mntapi10-shared-D587D587000010000000000005000000\$Reconfig$"
  -> msg = ""
  ->}
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 267] retrieved taskInfo to "converter.task.Task:task - 72" mapping to "converter.task.Task:task - 72".»
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 307] the task with id = "task-72" proved to be a task 'recent '.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-72. The task is still 'young' so a bundle of newspapers going now is assigned.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-72.
  2013 04-07 T 14: 14:20.925 + 02:00 [10056 "Default" info] passage work 0 "job-72" completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2013 04-07 T 14: 14:21.125 + 02:00 [10056 "Default" info] suspended 1 elements of Planner for employment (job-72) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  I run vCenter Converter Standalone 5.01 version 875114
  I tried to erbuild the mbr, the boot sector and the boot.ini, but no success yet a screen is blue with 0x00000007b
  any new idea

  Yes, something is not in communication with the pilot vstor2:

  2013 04-07 T 14: 13:11.545 + 02:00 [info 09908 "Default"] [, 0] Vmount library: 1450 error communication error with the pilot while
  2013 04-07 T 14: 13:11.545 + 02:00 [warning 07680 'Default'] [, 0] error 999 (hive to load error: unknown error 999 (0x3e7) (999)) temporary hive loading

  1450 error is "insufficient system resources exist to complete the requested service."

  999 error is "error performing a paging operation."

  Both are unusual. Try the task set up on destination VM, if the task fails you will need to restart the source machine and try to restart the conversion.

  HTH

  Just found/3 GB switch in your boot.ini file, there are rumors that sometimes you should remove this switch for successful conversion: http://communities.vmware.com/message/1708679#1708679

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Ripple packaging error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  I am trying to package and sign an application with ripple and I get this error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  What can possibly be the problem here?

  Solved!

  I had the field output folder of the same value as the name of the archive

• Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.

  André

• EMCA fails with the error "ORA-01034: ORACLE is not available.

  Hello
  10g R2 on AIX I have the following error:

  emca -config dbcontrol db -repos create
  ......................................................
  .....................................................
  Password for DBSNMP user:
  Invalid username/password. [ORA-01034: ORACLE not available]

  And that's because all oracle processes are runing with:
  ORACLE_HOME=/U00/Oracle/product/10.2.0/Db_1/
  
  EMCA fails with the error "ORA-01034: ORACLE is not available" and "Name of user and password invalid." For DBSNMP user [ID 550484.1]
  It is said:

  +<moderator edit - removed MOS content>+

  Can I do the reverse and in the script of the emca, add "/" at the end of ORACLE_HOME=/u00/oracle/product/10.2.0/db_1
  ??
  Thank you.
  
  Edited by moderator - content removed from MOS

  Hi user;

  First of all please do not post details here, its against to oracle interoperability metalink, ID is sufficient for us. Secondly, yes you can, first to save $ORACLE_HOME/bin/emca script like

  CP $ORACLE_HOME/bin/emca $ORACLE_HOME/bin/emca_org

  to change the file number and test

  Respect of
  HELIOS

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• Build request failed with the message: error: ENOENT, untie

  I use emulator ripple to package the application for Blackberry os 7...
  But when I press the button package it gives me error as follows:

  Oh, Snap! Build request failed with the message: error: ENOENT, remove the link "C:\Documents and Settings\AtikJ\RippleSites\AgriQuote\packaged\AgriQuoteApp.zip".

  Duplicate of:
  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-while-packaging-the-app-us...

• Oh, Snap! Build request failed with the message: [ERROR] CAP exception has occurred

  Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."

  I need your help pls.

  Hello!

  Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.

• Build request failed with the message: helloWorld/Dokumente / is not a valid path

  Hello

  Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
  SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
  The project root: / Dokumente/helloWorld
  Archive name: helloWorld
  Output folder: / Dokumente/BlackBerryOutput

  There is the file config.xml and index.html file in the helloWorld file

  I have for this site:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/creating_an_app_1885567_1...

  When I try to pack in ripple, I get:
  Build request failed with the message: helloWorld/Dokumente / is not a valid path

  There is a message ' no simulators found "on the bottom of the settings, too." '

  I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??

  Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.

  Just in case somebody stumbles on the same problem.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.