Build the AOSPS (unknown Baseband, flicker and recovery graph)

Similar Questions

• where are my data after the use of Dell backup and recovery

  Three check marks displayed on a Dell backup and recovery, which, I suppose, finishing meant that my backup was successful (using Windows on a Dell Inspiron 8.1).  Where my data is sent to after the use of Dell backup and recovery?

  

  Click on the 02:22 mark of the video.

  www.YouTube.com/watch

• How to reset the password of Lenovo Rescue and Recovery?

  Hi all!

  Here's my problem. Recently I discovered that I forgot my password for Lenovo Rescue and Recovery. I guess when I select the option "Protect your backups with a password", I could change my password for each new backup, whenever I remember my old password or not, but apparently not. So now I could not restore my previous backup and could not make a new one. Y at - it an option to reset the password?

  Thank you and sorry for my English

  Solved. Just uninstall the software, reboot, and install again. Now I can do a backup secure again.

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• I'm a little confused on the merger a system partition and recovery.

  Dear Sir, I deleted my recovery partition (D :). and then it merges with the C: partition, as my C: drive is running out of space done. Remove recovery partition affects operating system or computer or my drive hard. can reinstall the operating system creates a partition recovery any help.)

  On Wednesday, January 5, 2011 07:35:22 + 0000, chanderkant wrote:

  as I think that the partition which stores log, crash memory dump error files etc is the recovery partition. I'm wrong.

  Sorry, but no, it's not good. The recovery partition has been created by
  your computer manufacturer. It contains only an image of Windows in
  the State it was in when it left the factory. It is there for you
  to reinstall, should you need or want, and it never changes
  (unless you change - which you should never do).

  Ken Blake (MS-MVP)

• IM always get "low disk space" and the backup file always fails and recovery D

  always get low D recovery and backup disk space the files always cleaning disc fails is no help either

  You are NOT supposed to file backups on ypur recovery Partition D.

  Your recovery partition D is implemented by the manufacturer of your computer in the event of serious problems in your system.
  You use it to restore your system.

  You are NOT supposed to touch it... to not add anything in it or remove anything from him.

  You call the manufacturer of the computer, tell them the situation...

  1. ask for a set of recovery DVD, if you don't have a game yourself. The game is essential to restore your computer in case where it breaks down, and you screwed up the recovery partition which is unusable for recovery.
  2. ask to talk to a technician. Ask the person how to remove backup files or elements that are NOT supposed to be there.
  They, the manufacturer of computer created the recovery partition, they know how to take care of it.
  Let them teach how you to.

  Buy an external hard drive and use it for backups of the file *.

• Doubt about the upgrade of MB, format and recovery.

  
  

  Hi, Drekangard:

  Unless you replace the current motherboard replaced exact same, your PC will not boot even to the top, or you will be able to use the partition recovery or recovery disks to restore the operating system.

  Your only option would be to buy a new operating system as a new motherboard to Microsoft = buy a new operating system.

  Paul

• How to change the accuracy of output waveform and spreadsheet graph data acquisition

  See attached vi, data acquisition connects to a waveform graph in a spreadsheet. I want to change the precision of the output of Wizard DAQ 6 decimal places with 2 decimals, but everywhere I looked on the DAQ assistant, I can't find a control accuracy. I missed something? What is the elegant way to do this?

  Thank you.

  Hello sunflower.

  This seems related to this question...

  Why do you want to change the output of the DAQ assistant?

  Should not change the precision of the creation of the worksheet? To do, simply give a few parameters for the functions "to the string conversion..."

  Outside the file save all the other screen precision parameters are just cosmetic measures!

• Rescue and recovery - how to back up the entire operating system?

  Hi all

  Maybe I'm looking for something that is not supported, but since I got here, then we are

  I'm running Windows 7 Pro (x 64) on the T410.

  Rescue and Recovery 4.31

  I divided my HARD drive into 2 partitions: C for the OS and D for data.

  I have a disk storage network, so, apparently, I did not need to backup the data that is stored on drive D (already to store all my data on the NAS drive)

  What I want to do is to set up the R & R to backup all my drive C (the OS only)

  How can I go about to do?

  Thanks a lot for your comments

  You can do this in "Advanced" mode of Rescue and Recovery:

  1. open Rescue and Recovery

  2. click on the arrow next to "Launch Advanced Rescue and Recovery" in the lower left corner

  3. click on 'Set schedule and preferences' on the right side

  4. click on your "Include partitions" D: drive on the right, so that d will not be saved.

• Rescue and Recovery 4.21.00.16.00 have not installed

  I just use System Update to download and install Rescue and Recovery 4.21.00.16.00.

  He told me that she has not installed, but gave no reason and there is no error message.

  I tried again and SU acknowledges that it has been already downloaded, but the result was the

  even.

  Does this mean I'm stuck with 4.20.0511.00?

  I looked in my event viewer and has got a hint. Besides, knowing that my anti-virus program,

  BitDefender, willing of a feature which prevents the change to the registry without the permission of

  me and I had not asked for these, I decided to disable this feature, and then try again.

  It worked and I now have the latest version of rescue and recovery installed.

• Dell backup and recovery file storage location

  I am trying to locate where a backup of files of initial data with the help of Dell Backup and Recovery on my new Windows 7 laptop (Jan 2015), stored backup files.  I failed to provide parameters to use an external hard drive for backup.  I want to clean up backup files it does I can start using an external hard drive as storage location.  I looked everywhere, both on my laptop and Google search to find the location.  Any help would be greatly appreciated!

  I know that it is a bit a necro but since it is unanswered.

  You can determine where the Dell Backup and Recovery Software stored your files by default when opening the software and start to run another backup. (Note: when you run the software again you may see the option to run another backup from the home screen.) In this case click on the drop-down menu almost invisible in the title bar (blue arrow), then select "Backup" (red arrow) in the menu.)

  

  On the screen "Data Backup", check the "local".

  'Creating data backup' screen will display a box titled "Browse...". "under the title"Where. "

  At the bottom of this box, you should see the path where Dell Backup and Recovery saved your backup.

  For me, the default location is "C:\users\CURRENT_USER\Documents". (CURRENT_USER is your user name).

  If you navigate to this location in Windows Explorer, you should see a folder named "Profile1". Here's my Dell backup files are stored by default.

  If for any reason you do not see a folder named "Profile1" I open the files in the default location and search for files with the .inp file extension. What are your backup files.

  BTW, for anyone reading the FAQ is NOT DELL-Jesse L linked to you to note what the FAQ for Dell backup and recovery that is currently in use. This is the FAQ for their former Dell DataSafe Local Backup 2.0 software which they no longer use. If you read that FAQ you can noticed the question and the answer below:

  How can I move backups of the system to another location for storage?

  Backup system can be moved to another storage location if you wish. Simply open Dell DataSafe and edit the backup for backups of your system profile. When you select the location, select the location where you want that all backups of the system to create. The application will automatically move all backups of your system to this new location.

  I just tested this in the current version of Dell backup and restore (version 1.8.1.70), and he did NOT move my old files from backup to the new location, he created a new copy from the backup, so you should delete old copies manually.

  I hope this helps someone.

• Impossible software update think Ventage Rescue and Recovery - pls help!

  Hello!

  My problem is, when I try to install the new version of Rescue and Recovery (tvtrnr42_1016hu)

  Unpacking, extracting ok after I give a following message appears: The Rescue and Recovery program is already installed on your computer. You must uninstall the current version of the program Rescue and Recovery by using the "Add/Remove Programs" utility locatec in Control Panel before you can continue with this situation. OK and complete the set up of InstalSheed.

  When I try to uninstall the InstalSheed RR doesn't ' t find the rescue and the Recovery.msi in the C:\WINDOWS\Downloaded facilities {7D7928D2-33A2-425F-B393-4F67E0D53EE2}------folder. I manually search for and choose this folder and files, but program, it is not even, and I can't remove it.

  What can I do? Whare can I dovnloaded the correct msi file? Now I have the 3.01.1037.00 version.

  Thank you answare.

  Winti

  Hello

  do not expect a response from the community of English language for this problem.

  When you install R & R, it checks the language of your computer. I tried to install the English version, but failed. Then I downloaded the french version and it went well.

  National language support...

  Hope this helps, Jacques

• the display is turn off and when I press on who I want to see the details

  It shovs

  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1062

  Additional information about the problem

  BCCode: 116

  BCP1: 85366510

  BCP2: 8EE329B0

  BCP3: 00000000

  BCP4: 0000000C

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Bucket ID: 0x116_TdrBCR:C_Tdr:2_IMAGE_igdkmd32.sys

  Information about the server: bddeaa5e-0a75-449c-ba5a-01471578e9f4

  BCCode: 116

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.

  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.

  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.

  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time.

  Good luck!

• This copy of windows is not genuine after the replacement hard drive and recovery system

  I was running factory installed windows 7 Home premium in my laptop hp pavilion dv6 6119tx. Due to hard drive crash I replaced with new HARD drive.  Previously, I did system image backup using easeus todo backup and recovery softeware. After system recovery with the same software, this massage flasehes "this copy of windows is not genuine". I tried to enter the key of product at the back of the laptop but it says invalid.
  I ran diagnstic windows validation tool. him as a result is below.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4ab
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CA180260-1211-48DB-834C-4805A4594053} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CA180260-1211-48DB-834C-4805A4594053}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1883088055-1570218021-1659234768Hewlett-PackardHP Pavilion dv6 Notebook PCHewlett-PackardF.1B20111005000000.000000 + 0002BFD3F07018400FE40090409India Standard Time(GMT+05:30)03DELL QA09 100100Microsoft Office Enterprise 2007126DF6616C522F5867l28mQpHyGN4/v7tLnJzLV + ZnKQ = 89388-707-5082974-6591914

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-16393-7601.0000-0552012
  Installation ID: 010735456091822376148725581093255175938323439855115461
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 1
  Trust time: 10/07/2012 10:49:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4AB
  Beyond: PASS
  Event timestamp: 10:7:2012 10:46
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: OAAAAAEAAQABAAIAAAAGAAAAAgABAAEA6GGaTIaqGKMieFCbUkhwn9QjphiojRKp0gzcQQzDLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HP APIC INSYDE
  HPQOEM FACP SLIC-MPC
  HPET HP INSYDE
  START HP INSYDE
  MCFG HP INSYDE
  ASF!            HP INSYDE
  QA09 DELL SLIC
  SSDT HP INSYDE
  ASPT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE
  SSDT HP INSYDE

  Help, please

  Code of Validation caching: 0xc004c4ab

  
  
  Windows has detected the presence of a feat of activation as evidenced by the presence of a table of slic of Dell on a HP computer.
  You need to install windows genuine.

• Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Please take a genius appointment at an Apple Store, or select another authorized service provider.