buildall. SH env: javac: Arg list too long

Similar Questions

• Bug: Find/replace does not work if the statement contains the string is too long

  Hello

  in my sequence, I press Ctrl + F to open the Find dialog box and enter a string. All the checkboxes are checked 'Elements for search' and ' limit the search to "is not enabled.

  Now comes the finding it is only announcing the discovery in the main sequence.

  Other places in a sous-suite that are part of a labview vi action setting is not in the list. Also if I open the sequence and I'm looking at this place.

  If I create a comment in the subsequence containing the searchstring, then it is.

  When I open the properties of the action of labview and open the parameter that contains the string and click on check for errors, and then close all and supplementary search then the value lies.

  Is it possible that the variable is too long setting? It's about 200 characters and one thing very nested SationGlobals and the table and the TestSockets. Search string Dees is finally an arrayindex in this grand statement.

  It seems that this is the problem.

  Is this a known bug?

  Solved.

  There was an empty character at the end of the search string...

• Take too long time to come for Windows

  Hello

  I have Pavilion g6-2031se and of the last two days it takes too long to come to Windows. I faced this problem for the first time and I do not use my notebook for Skype, Facebook and only very light work. Can someone help me with this?

  Thank you

  Ganga

  @Ganga,

  No worries, I would like you to try a clean boot. This allows the computer to boot without unnecessary programs or offers to start with it.  When you open this document of croll to the section "How to perform a clean boot" once listed there to expand the section for your operating system to get the appropriate instructions.

  Once you have made the appropriate changes, restart the computer at least 3 times and see if you notice a difference not how long it takes to start.

  Please answer as soon as possible.

  Thank you

• Identify too long to backup file names.

  Using Vista on my laptop and the complex file names are required because of the research that I do.

  When you run a regular backup to an external drive, I get an error message that some file names are too long for the files to copy, but no list of crime files is given.  I am informed to shorten them, but not how to identify them.
  Is there a quick way to find these files so that I can change the names?

  Hi John,.

  I just went to that link without problem using IE9 RC - but if you send you elsewhere to get the download, then maybe you'll have more success with the download page: http://www.parhelia-tools.com/products/pathscanner/Download.aspx.  It is the only near the top (or you can try the alternate).

  If specific filenames are not so long (assuming 260 is the number we need to worry and we are not quite sure of this), then it's probably the length of the path.  The path includes everything, like C:\Users\\Appdata\local\microsoft\temp\iooiee90939ntgngjoiga909ri4jt09049japgaopjgp\...\filename.doc and if this WHOLE thing is too long (260 or other), then it cannot copy or paste.  Chances are that these files were created by programs or automatically, not by you.

  My guess is that these are temporary files of IE (they tend to be very long) and if first delete you IE temporary files (Tools / Options / history / delete / don't check the Temp files and save them favorite boxes above, uncheck everything else for this test), then you find out that you don't really have the problem more.

  What is the external hard drive formatted in NTFS or FAT32 or FAT16?  If this isn't NTFS, I recommend that use the command convert to change to NTFS.  Not only is a better choice, but it can also solve this problem (although it's more a guess that based on specific research-, then it makes a difference with the size of the file and the file information, I saw say anything specifically made a difference in path length).  http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format.

  I hope this helps.

  Good luck!

• Windows xp - path too long

  Hiya,

  I work for a company to use the digital camera and retrieve images dailly.

  However, the memory card, I'm trying to use won't be open, "path too long". I clicked on 'Properties', where it is said there are files and folders in there.

  Please could you help me to get into these files, it is very important recover us these photos.

  Thanks again x

  EDIT: Sorry I seem to have posted this in the wrong section - I posted 1 in the section "xp". Sorry, this is the 1st time I used microsoft answers xxx

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• Too long file names

  I searched this but have not found exactly the same problem

  I'm on a laptop with Windows 7.

  Recently, we changed our server to be online only.

  This means that all of our readers are now thanks to dropbox or something similar.

  A disc remained in my reader list.

  Initially, I had access to this hard drive, but could not edit the files and folders inside.

  Look, but don't touch.

  When the car started all the information on this drive was transferred to online readers AND an external hard drive.

  Which was not noticed immediately, was that some 150 file names were too long for each transfer.

  I still have access to these files.

  But when I try to open or to copy the files from the windows Explorer, it blocks.

  I tried to copy and paste, line of cmd, and several smart programs and I can't seem to get these files to copy, or even move.

  Copy / paste comes up with the error too long file name.

  I can however copy about 2 GB for other files without problem.

  The name of the file is certainly the question that all other files and folders can be copied to another drive.

  On the copy of the disc it comes up with the file name too long for these files.

  Any help would be greatly appreciated

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• In Event Viewer, is it possible to see Destination path too Long

  I want to know if there is a way, in the event viewer, see the list of files whose names are too long.  I write down everyone who needs to be changed, but a log file that I could print would be much faster.  If I CUT and paste, then the long named files would remain, but it is a copy.  So, I must go back and find one by one.  Not having to write simply would make it faster.

  Thank you!

  Some people have found a solution in a similar position on MS Technet here. Let me know if one of them will help you.

• 'File name' error too long when you copy a folder to a DVD disc

  When I copy a folder that contains a large number of files on an external hard drive, I have no problem, but if I try to copy the same folder to a DVD disc, I get a message indicating that a file name is too long.  My first question is why do I get the message for DVD and not the external hard drive?  My second question is: How can I generate a list of files in my folder that have too long names? My second question is already other post on the forum, but there was no answer.  Is it because it is not possible to generate such a list?

  Thank you

  It depends on what is called the 'file system '. File systems are how files are stored on a disk. Many of them have limits on how long the total file path can be. DVD and external hard drives use different file systems.

  If you want a list of all the files in a folder, open a command prompt. Type this in:

  CD "C:\path\to\folder".

  and press ENTER. Replace path\to\folder with the path of the file in your file that you want to check to make sure this filepath is in quotes!

  Now type:

  dir /s > 'output.txt '.

  and press ENTER. This will tell the guest to make a list of all the files in this folder and in each subfolder, and then store in a text file. This will allow you to view the list and I hope to find the long file names. Once you have found the long file name, go to that file, and then change the name.

  Here is an example of the above commands. Let's say I have a folder named "foo" in the My Documents folder. I first type:

  CD "C:\Users\Entegy\Documents\foo".

  and press ENTER. Now, I want the list of files to be placed on my desk. Then I type:

  dir /s > "C:\Users\Entegy\Desktop\filelist.txt."

  And voila, I have a list of all the content of foo on my desktop files. Just make sure that your path ends with .txt and you'll be fine. And don't forget to put quotes around filepaths!

• Flgam takes too long to stop

  Here I would start troubleshooting in a fglam that takes too long to stop?

  Solaris 10

  Flgam version 5.6.2.4

  The full list of former agents running

  [myname@myhost bin] $ sudo. / fglam - wq

  2013-06-12 22:18:48.000 INFO [natives] send request stop at "AgentManager.

  process running in/opt/Foglight/fglam/state/default (pid 26893).

  2013-06-12 22:18:48.000 INFO [native] transmitted stay application.

  2013-06-12 22:18:48.000 INFO [native] Meanwhile the process of "AgentManager.

  (pid 26893) stopped

  I'll just kill him at this time, but I had to know exactly, what happened with her. It is not the first report of the fglam power issues I've had.

  You can start with a beam of support from fglam and then analyze it to see if the repetition of messages are written.

  How long you wait for the fglam to terminate?

  David Mendoza

• Pointer is over an icon too long. It is not easy even get the internet sometimes

  I find it too difficult to navigate. Need me to places just because my pointer is over an icon too long. It is not easy even get the internet sometimes. I'm the only person who dislikes this 'new' windows?

  Hello

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows updates take too long to install why?

  Original title: Windows Vaio updates

  I agree allow updates process, but the screen showed the progression of 30% for half an hour. Then I decided to turn off and on again once as (no progress for half an hour) seemed normal. How long these updates usually take? Thank you

  Hi JeanWo,

  Thanks for choosing Microsoft Community to post your question. I understand the inconvenience caused because of the frozen computer. Amount of time it takes to install the updates, depends on the total number of updates and their size. Please be patient and let the updates to install. If it is too long, please follow this link suggestions.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Antivirus warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note When you use the 'Refresh your PC' tool, your computer will render you the current Windows installation to the original installation version. This method requires you to reinstall all updates that are not on the installation. Applications that you have installed the drives or Web sites will be removed. You will find a list of applications on your desktop.

  Hope that the information provided is useful. Do not respond if you need more help.

• Shuttle value too long for use in LOV sql cascading

  Hello

  On APEX 4.2.2.0.11 & Oracle 10.2.0.5.0:

  I have a shuttle service set up as well as a select list with of LOV cascading.

  The shuttle shows organization name and returns a list of the IDs of the colon separated.

  The selection list shows the so-called events belonging to the organizations selected in the shuttle.

  The selection list is implemented as LOV cascading with the shuttle as a parent element.

  This works fine as long as the length of the shuttle point value does not exceed 4000 characters.

  If so, the LOV - sql select list will give an ' ORA-01704: string literal too long "-error on the instr function ().

  This is the query:

  Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE ORGS

  Join the LIFO ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DNR PART on (DNR. ADG_ID = ADG.ID)

  Join the TDR ON REGRET (TDR. DNR_ID = DNR.ID)

  Join the TEST TCT ON (TST.ID = RDT. TST_ID)

  where instr (': ' |: P1_ORG |) ':', ':' || OTE.ID | ') > 0

  order by 1

  Does anyone know how to make reference to the shuttle-value in sql, even if it is longer than 4000 characters?

  Well, I found a way to use LOVs cascading on page elements with values exceeding 4000 characters:

  Let's say I have a shuttle named P1_ORGANISATIE with "List of values" box, a dynamic LOV named "Source: lists of values Query" containing the value:

  Select NAAM as display_value, ID like return_value

  of NINEHAM

  order by 1

  If the number of records-NINEHAM is insufficient, the length of the value of P1_ORGANISATIE, which is a list of concatenated with colon separated digital ID, can exceed 4000 characters.

  Now suppose I have a list of selection called P1_TEST that is connected through "List of values"-> "En cascade LOV Parent article (s)" with P1_ORGANISATIE using a named LOV dynamics with "Source: lists of values Query" containing:

  Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | '':'') > 0

  order by 1

  In this case, when P1_ORGANISATIE exceeds 3998 characters, you'll get an "ORA-01704: string literal too long"-error and the P1_TEST will show an element called "undefined".

  A way around this is possible because for a named LOV, you can use a "function that returns a sql query" instead of a simple sql query. In other words, we can apply in the context of PL/SQL and thus have maximum for expressions of 32767 instead of 4000 characters. In addition, it is possible to use the two APEX_UTIL. STRING_TO_TABLE and APEX_COLLECTION.

  Setting "Source: lists of query values" on the LOV appointed to P1_TEST with the following code will work:

  DECLARE

  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;

  l_qry varchar2 (32767): =.

  "Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  $1

  order by 1';

  BEGIN

  IF: P1_ORGANISATIE IS NULL

  OR LENGTH(:P1_ORGANISATIE)<=>

  THEN RETURN

  Replace (l_qry

  ,'$1'

  ,' where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | '':'') > 0'

  );

  ON THE OTHER

  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P1_ORGANISATIE);

  APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name-online 'ORGANISATIE_COLLECTIE');

  FOR id IN 1.l_selected.count

  LOOP

  APEX_COLLECTION.add_member (p_collection_name-online 'ORGANISATIE_COLLECTIE'

  p_n001-online to_number (l_selected (id))

  );

  END LOOP;

  RETURN

  Replace (l_qry

  ,'$1'

  ,'join apex_collections ON APC (APC. COLLECTION_NAME = "ORGANISATIE_COLLECTIE" AND APC. N001 = OTE.ID)"

  );

  END IF;

  END;

• Forms 10g + UTF8 - Item displays # when he's happy is too long

  Hello

  I am facing a strange behavior with Forms 10 g and NLS_LANG = UTF8.

  DB 11G withcharset in AL32UTF8 on Linux

  Forms 10G on Linux

  We are currently upgrading our DB 10 G DB 11 G + UTF8 form.

  After adaptation data DB 10G and 11G, we changed sementics BYTE in CHAR columns in DB 11 G.

  Migration worked well.

  Now we try to connect to our application in the form of 10G to the new DB 11 G + UTF8.

  First we were faced with the error ORA-01461 "can bind a long value only for insert in a long column".

  To resolve this error, we have clarified the NLS_LANG = american_america.utf8 in default.env.

  This problem is solved now.

  We have specified the following parameters when compiling:

  NLS_LANG = AMERICAN_AMERICA. UTF8

  Export NLS_LANG

  NLS_LENGTH_SEMANTICS = CHAR

  Export NLS_LENGTH_SEMANTICS

  The application works fine except a few ITEMs that display # when their content is too long.

  For example with a Varchar2 ELEMENT (5) length_semantics = NULL (if the compiler uses the NLS_LENGTH_SEMANTICS specified during compilation).

  -When I fill it with "xxxxx" it works very well.

  -When I fill it with "xxxxe", it displays "#". The ELEMENT behaves as in Excel when the cell data cannot be displayed as a whole.

  Any idea on how I can avoid this behavior?

  Thanks in advance.

  Tim.

  There is a bug in forms 10.1.2.3 for when the length of an element in BYTES is greater than the length of the CHAR data # are displayed.

  =>

  Length ('xxxxx') = lengthb ('xxxxx')

  but

  Length ('xxxxa')<>

  so you will get #.

  There is a single patch for this what number I do not remember. The patch is packaged in the latest available patch for forms #9593176 and #13095466 which will also give you the benefits of being able to run your forms 10 g with Java7 (even if she is not certified).

  see you soon

• SP2-0027: entry is too long - error on pl/sql procedure

  Hello
  
  We are on Oracle 11.2.0.2 on Solaris 10. I scream a procedure that errors with this error:
  SP2-0027: entry is too long (> 2499 characters) - ignored line
  It's a unique procedure, but it takes too long entries in there. This giant procedure call - with some names have been changed - is as below - is there a way I can avoid this errro? I will be grateful for input on this subject.

  SQL> exec func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF','co Reporting','NOT',func_j23k_TYPE_ACTION_ARRAY(func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Find in Report List'),LANG_TEXT_TYPE('en_CA', 'Find in Report List'),LANG_TEXT_TYPE('fr_CA', 'Chercher dans la liste des rapports'),LANG_TEXT_TYPE('es_US', 'Buscar en lista de informes')),'/Reporting/el/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open using Excel'),LANG_TEXT_TYPE('en_CA', 'Open using Excel'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format Excel'),LANG_TEXT_TYPE('es_US', 'Abrir usando Excel')),'/Reporting/el/xls/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in PDF'),LANG_TEXT_TYPE('en_CA', 'Open in PDF'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format PDF'),LANG_TEXT_TYPE('es_US', 'Abrir en PDF')),'/Reporting/el/pdf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in HTML'),LANG_TEXT_TYPE('en_CA', 'Open in HTML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format HTML'),LANG_TEXT_TYPE('es_US', 'Abrir en HTML')),'/Reporting/el/html/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in TXT'),LANG_TEXT_TYPE('en_CA', 'Open in TXT'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format TXT'),LANG_TEXT_TYPE('es_US', 'Abrir en TXT')),'/Reporting/el/txt/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in CSV'),LANG_TEXT_TYPE('en_CA', 'Open in CSV'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format CSV'),LANG_TEXT_TYPE('es_US', 'Abrir en CSV')),'/Reporting/el/csv/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in XML'),LANG_TEXT_TYPE('en_CA', 'Open in XML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format XML'),LANG_TEXT_TYPE('es_US', 'Abrir en XML')),'/Reporting/el/xml/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Download Data Extract File'),LANG_TEXT_TYPE('en_CA', 'Download Data Extract File'),LANG_TEXT_TYPE('fr_CA', 'Télécharger le fichier d''extraction de données'),LANG_TEXT_TYPE('es_US', 'Descargar archivo de extracción de datos')),'/Reporting/el/flf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL)), 'MC');
  
  SP2-0027: Input is too long (> 2499 characters) - line ignored

  Thank you
  OrauserN

  It is a mistake to sqlplus...

  Have you tried that?

  begin
  func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF',
    'co Reporting',
     'NOT',
     .....,
     ......,
     );
  end;
  

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4789399600346029472