Building blocks in the reference table of contents page

Similar Questions

• All of a sudden, the emails I am dial are a building block in the middle of the screen.  I can't minimize or move the drive to refer to another email.  Must send to the project folder.  Boring!  Why is this happening?

  Hello!  All of a sudden, the emails I am dial are a building block in the middle of the screen.  I can't minimize or move them if I need to take a break to refer to another email.  I send email partially completed to the drafts folder.  It is extremely annoying.  How to do this?  Operating system is OS X Yosemite (10.10.5) on a MacBook Pro.   Thank you!

  You are using the full screen? Try the command - command - F.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Cannot change the table of Contents Page icons in RH10

  I adapted successfully table of Contents Page icons in the previous versions, but in RH10, option seems to be missing. After past the method as well as help boards & Forums, I have pod TOC page right-click, choose Properties, Advanced tab, but once there all I see are the image and comment options. There is no option to change the icon of the automobile to a different style in a drop-down list (because I expected to see under Advanced). My OS is Windows 7 Enterprise 64-bit. Either by the way, I used this feature in the past to indicate a subject that has new features or topics of a different nature.

  Hello

  I have RH10 in front of me at the moment, so I paint entirely from memory on this.

  When you look at your single Source Layouts pod, which is the main provision on?

  If it is not configured for Microsoft HTML Help, find this layout and right click. Then propose that it be the main provision. Once you do this, I'd be willing to bet a dollar against a doughnut that you will now see the option to change the icons.

  See you soon... Rick

• Adding a button before the button table of contents in a WebHelp Pro navigation bar

  My customer wants to add a "Home" button to the left of the button table of contents in the navigation bar. I can button ad to the right of the 'standard' buttons: table of contents, search, print, and glossary, but even if I go and edit the skn file and add the 'Home' botton before the table of contents one, it always displays to the right. Is that all that I'm missing?

  Thank you.

  Using RoboHelp 9 and Robohelp Server.

  Thank you

  Hello

  I have HR server, so it's kinda a guess but I think as a method of work.

  Change the order of the toolbar in the whstart.js file.

  1. in the whstart.js file, go to line 184 (RH10), it has the text ElseIf (nMsgId == WH_MSG_TOOLBARORDER).

  2. we will find the opening brace, add the following code:

  oMsg.oParam = "CUSTOM" TOC | GLO | IDX | FTS | blackblock | searchform | banner ";

  Returns false;

  3. open whskin_tbars.htm and go to the bottom of the file to find some calls starting with addButton.

  4 Copyt the id of the button (customxxxx) and replace the CUSTOM in the whstart.js file text.

  Change whskin_tbars.htm

  1. open whskin_tbars.htm

  2. go in the bottom of the file and find some calls starting with addButton.

  3. fix the lines in the order you want the buttons to appear. (Remember the "blankblock" button to push some content to the right of the toolbar.

  4. remove the call to the ReSortToolbarButtons() function in the whskin_tbars.js file.

  If WebHelp always use the buttons, try adding return false; as the first code of the ReSortToolbarButtons() function in the whtbar.js file

  Hope this helps,

  Take a bow

  Willam

• Chapter with Figures OCD does not end up in the main table of contents

  At the end of my document. I have a list of numbers. This list of figures has its name in my chapter paragraph Style. At the beginning of my document, I have a main table of contents. When I update the table of contents, list of figures chapter would end up in the main table of contents. Is there something I can do to fix that? I was thinking of a hidden layer with a second title of chapter for a list of Figures, but it's a hack. Is there a better way?

  I was able to get the table of contents to update correctly. I did two things, and I don't know which was the right one, or if you need to do both, but here's what worked:

  Export the list in the history of the figures to tagged text, and then disable Smart Rflow text and remove all executives who are in this thread, so history has completely disappeared from the file (but the pages are left behind). File > Place... and choose the story exported and auto-flow, then select those images and change the number of columns. Now, select and delete the existing text in the history of the table of contents (I left executives), then layout > TOC and regenerate.

• How to change the width of the component table of contents

  9 RoboHelp, WebHelp Pro, WebHelp Server

  I want the component table of contents to be wider that when managers WebHelp default window opens. How can I control this?

  Hello

  As Peter mentioned there are continuous thread in which I mentioned the name of the file in which you can change the value, this file is available I Robohelp server publishished to the project but is not standing, then you must change the value each time only time publish. Check the wire and let me know if you have any doubts.

  http://forums.Adobe.com/message/4638778#4638778

  In server you will find your published project: it's my location of machines, you will need to check with your COMPUTER administrator who configures the server.

  C:\Program Files\Adobe\Adobe RoboHelp Server 9\robo\server\general\

  Thank you

  Priyank

• Hide the items in the menu table of contents

  Hello!

  I'm doing an iPad magazine and I have a question about the menu table of contents.

  One of the FAKE paintings, go to an index page for one of the parties in the magazine.

  So, I wouldn't have the other articles in this section to display in the menu table of contents.

  How can I do? The only way I know to leave items on the menu of the table of contents should mark them as ads.

  Which is the way to do it or there at - it another way to solve my problem?

  Another question about metadata, you must enter. That means "Tags"? What to write here?

  Thanks in advance!

  / Karin

  70 x 70 pixels

  Herzliche Grüße | Kind regards

  Ulrich haha

  PS: E-Learning mit ulrich-media:

  http://www.e-College.ch

  --

  u r i c h - m e d l I have a G m b H

  http://www.Ulrich-media.ch

  10/6/2011 karin_strom [email protected]>

  >

  Another wuestion in the pictures of the table of contents:

  What is the best size/dimension to make them in?

  Right now they look a little pixelated.

  >

  / Karin

  >

• Unable to translate the text strings in the menu table of contents (Cp5)

  Heyo,

  I am creating the French eLearning with Captivate 5 language. As part of this process had to make a version in French of our existing PlayBar (which was an adaptation of the BlackGlass.fla AS3 playbar file that comes with Captivate 5).

  I was able to update all channels language of Flash CS5 from the video for location (there are instructions in the ActionScript code that indicates where this). However, the table of contents menu that opens doesn't have strings translated, as I yelled at my screen shot below. There are at least four strings that need translation: bookmark (that appears as a ToolTip when you hover over the star in the upper left corner), the slide title, duration and Minutes (bottom).

  As far as I know, this logical problem because the bar read FLA files provided do not appear to contain the menu table of contents, only the button table of contents. However, there is nowhere the Captivate software where I can see the ability to change it. Is - this bug I should report?

  

  Hello

  I don't know if Captivate 5 behaves as Captivate 4 does with that. If so, maybe the link below will help:

  Click here to see

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Adobe Captivate 7 - How to create a custom without the function table of contents table of contents?

  Hello

  I want to create a table of contents in my E-Learning-project because the automatically generated TOC of Adobe Captivate 7 includes all the features I need to check for example chapters which are the groups in the film strip.

  
  I use master slides in my project.
  The table of contents, I need must be designed and programmed as follows:

  1 intro / title slides

  9 chapters

  The progress of the work - 3 status - all chapters should be moved by symbols in the table of contents

  Symbol 1: chapter has not yet begun (just an empty box)

  Side 2: chapter is work in progress (a square with a green triangle inside)
  Side 3: chapter is finished that means that all of the slides in this chapter are read (the square is filled with a green square)

  All the chapters and Points to the table of contents must be clickable (links) maybe with a mouse over effect (change in colour of mouse) and should start to the first slide of this chapter.

  The chapter which is open must be written in bold with one blue color, others who are not open to be written in the normal font with a black color

  I think it's a little complex, but solutionable.

  I think I need to create three symbols of the buttons form, advanced actions that tend to fade and fade out named symbols.

  Is there someone who can describe the process of creation? Where should I place all the functions, actions and so on? On the slide master?

  Thank you for the answers!

  The only thing I can say about it is that I build it in Flash, so it could be dynamic and reusable.

  If you take the time to build a PC inside it only works for one project. Certainly you would have a base to work from, but for a another edition project wouldn't be fun.

  If you need HTML5, I think it would be much more difficult to build a dynamic table of contents.

• Table of contents, Page number on the left if the tab is too short

  Sorry about the title of coplex, couldn't happen to a better.

  Is there a solution to the table of contents of style then the page number never ends on the left side? Everything works fine if the topics listed in the TOC spans on one or more lines.

  But if the listed topic ends exactly at the end of a line (in the table of contents), the page number appears on the left side of the next line. (I have a ^ t between the entrance and the number in the table of contents style.) If a single word in flows in the line below, the table of contents correctly adds the... (dotted) and place the pagenumber to the right.

  Can I modify the paragraph Style from table of contents or TOC Style so that the number is right-aligned, even if there is no prior entry (which is on the line above).

  Example of the problem:

  Correct / Normal... 1
  This title is exact a row of table of contents
  2

  I would also put the option "Balance unbalanced lines.

• How to prevent the blades to move forward in the automatic table of contents?

  I use 7 Captivate.

  I've done two smart buttons shape on a slide. A to see the table of contents and another to hide the TOC; overlay.

  The buttons work, but when you click them they always go to the next slide.

  I want only the slide advance when the user selects another slide in the table of contents.

  How can I stop the auto-avance then the user will be in control?

  Thanks in advance.

  Even the master slides, a simple gesture will automatically release the read head. He is replaced by an advanced standard of action:

  Why choose Standard Simple action? -Captivate Blog

  My post on the buttons to toggle form may give you some ideas?

  Shape toggle - Captivate 6 - Captivate blog buttons

• Creating hyperlink in the generated table of contents

  Hello

  I use InDesign CS4 and the difficulty to create hyperlinks in my automatically generated by Table of contents. I can create the destination in the document, but then the opportunity to create the new hyperlink (from Interactive menu drop-down) in the table of contents has disappeared. Option is not visible anywhere elsewhere in the document, or if I create manually the table of contents, just doesn't seem to work with generated automatically a.  Does anyone know if this is a known problem in CS4?

  Have you tried checking the "Hyperlink" box on the PDF export?

  

• Problem with the table of contents pages and books

  I use 8 HR and generate Webhelp.

  I created a project and had to change a few pages of table of contents and create TOC books instead. I deleted the pages and added books, with the same name. HR, it looks fine, but when I generate the table of contents for the page instead of the book. I tried to clear my cache in Internet Explorer, and the deletion of the page again. Still no help. I rebooted and even rebooted and still have the same thing. Can someone tell me how to solve this problem?

  Thank you.

  Indeed if a book has nothing in it, it will not appear in the table of contents. When you think about it, it is very logical. Why would you want a book to appear if nothing was inside?

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• The chapter Table of contents?

  I've been away from FrameMaker for awhile, but I am now back, the FM 8.0p277 on Windows. What is the the less painful way to add a table of contents within a chapter (individual file in a book)? Is it use special > Table of contents for each chapter, and then import this TOC in each chapter? I saw mention of an add-on - Systec Toolbox - somewhere, but I can't find a good URL for it.

  The company I'm contracting for now manually add ref Cross (title and page no.) in a table. It is so-o-o-o painful. I like the table. Can I safely import the TOC file in a table cell? How could I get formatting and tab set up - in the TOC file or the file of chapter?

  Thanks in advance for your suggestions and advice.

  -Gloria Mc

  Gloria,

  The only real trap with OCD as a medallion of text is to remember to update it for updating the book. Make a check list and stick to it.

• FRM - 40202:Field must be entered on two blocks with the same table

  I have two blocks, blockA and blockB, both from the same table that is tableX.
  
  When I ask of blockA and it worked, then I go to blockB and modify data, and save, there is no problem. But when I do not run the query of blockA or if the query did not return any results, I go to blockB and change some data then save, I got this error. The cursor then go to first blockA point. So now, I have to delete this empty line before the Save.
  
  
  Any suggestion?

  you set a few initial values programmatically for a block?
  in this case, the status changes to INSERT and you will get this message.
  You can check the staus with GET_RECORD_PROPERTY (1, "A BLOCK", STATUS), e.g. with the trigger KEY-COMMIT.