config/sys file is corrupted

Similar Questions

• Satellite M115-S30394 - config.sys file is corrupt

  I bought a Satellite M115 S 30394 is about 2 years.
  The first year he had 9 hard drives and Toshiba said they replaced the motherboard 2 times.

  It still does not work and the senario is first a message that the config.sys file is corrupt and after correcting it will work for a few days, then a message appears that the hard drive is about to fail and he does it in 2 days.

  I replaced because he couldn't be trusted in my company but I was wondering if someone has any ideas so that I can have as a spare.

  Thank you

  Hello

  If you get the message that the HARD disk fails, then it s advisable to replace it.
  But it s really strange question

  In any case, I never had this problem on one of my notebooks, but I think you should test the notebook with a new HARD drive.

  Good luck

• Dmboot.sys file is corrupted, Windows XP screen flashes back.

  Original title: corrupt dmboot.sys

  Dmboot.sys file is corrupt, option of safe mode back but does not help once selected. Flashing at the back of the screen the WindowsXP and safe mode

  You don't describe symptoms suggestive of a necessity to implement KB307545.

  Suggesting a KB307545 as a first troubleshooting step akin to say "I don't know what the problem is or how to solve this problem", in particular, and even worse when you have no symptoms.

  My system does not use dmboot.sys, but obviously you don't (or want to).  If yours is grieving, you can usually replace using backups on your system already, so I look at that first.

  It's too bad that MS Answers forums does not prompt for any information system when a new question is asked, so it knows absolutely nothing about your system then this is what I would do...

  Since you can get Safe Mode, follow these steps:

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  The dmboot.sys file must be in this folder (assuming that XP is installed on your C drive):

  c:\Windows\System32\Drivers

  Depending on your installation, enter the following command:

  copy c:\windows\system32\dllcache\dmboot.sys c:\windows\system32\drivers

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If the file has not been found in the dllcache folder (it should really be), enter this command:

  copy c:\windows\ServicePackFiles\i386\dmboot.sys c:\windows\system32\drivers

  If it is still not found, then I can download one on my SkyDrive and you can download it and replace the one on your system.

  After replacing the file, restart and see what things look like.

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• SFC reports VistaSP2 corrupt config.sys file

  I got the following message after running SFC.exe: CSI 00000230 [SR] could not reproject corrupted file [ml:520 {260}, l:12 {6}] '------? \C:"\[l:20{10}]"config.sys '; source file in the store is also corrupted

  My Compaq 8710p works well if the question above bother me or can I ignore it? The start is a bit slow and 2 icons in the Notification bar are sometimes missing (Volume and network) but for the rest OK?

  Thank you

  Config.sys is unlikely to be used on your computer. It cannot be read when using MS-DOS or Windows 3.1 programs (prior to 1995). It is not even important for most, but not all, of these old programs.

  Ignore it.

• I turned on my computer and found this error message, windows does not start because the following file is missing or corrupt, config sys files

  I turned on the computer and this error message was the first thing I saw, and I had to spend the next half-hour reinstall windows xp. I want to know why I had to do and what can I do if this does not happen?

  Hi Lady of shadows,

  ·         What is Windows now reinstalled and perfect work?

  If so, you can see the following article for future reference.

  How do I recover from a corrupted registry that prevents Windows XP startup

• Lack of Config.Sys

  My Config.Sys file is missing, preventing me from starting Windows XP Home edition.  I don't have the original CD installs Windows suggestions.  Also, it appears that the laptop will not support Windows 7.  Thank you.

  Hi RJCF,.

  · Provide the exact error message or the error code that you receive when you try to start on the computer?

  Try to start the computer by using the last known good configuration, you can check the link for the steps below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  If this does not help, you may need to contact the manufacturer of the computer for technical support options.

  For the other troubleshooting steps, please see the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A60 does not start: missing or damaged config.sys

  Hello

  I turned off my computer Friday, I went back to his Monday - and it won't start. I thought that the config.sys file is missing or damaged.

  I tried all the usual methods - safe mode, last known good setting, OS etc, but none of it works. The computer does not recognize that the recovery CD is in the drive, either.

  As I don't have an original installation CD - the computer was shipped with the software already installed - I can't try either.

  I want especially to recover the entire system, but if I have to, I can live with that. Any suggestions would be welcome.

  Thank you very much.

  RONMAC

  Have you tried to boot your PC and press C after POST message? Recovery CD to be inserted.
  This C command forces the laptop to boot from ODD first.

  Maybe it works for you.

• config.sys

  When I type in run: config.sys, I get a file not found error message

  Windows XP does not use the config.sys file.

  Why you try to open it?  There could be another way to do what you want.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• missing or corrupted ntfs.sys file

  I get a message that my ntfs.sys file is missing or damaged.  It tells me to insert the original installation cd, however, I don't have the original installation cd.  What can I do to restore this file and my computer?

  Hello

  ·         How Windows XP has been installed on the computer?

  Unfortunately, you would need a disk to fix the problem. See the following article on the problem you are experiencing.

  NTFS.sys missing or corrupt error message

• SYSTEM WILL NOT BOOT: error in file/window/sys32/config/sys registered: 0Xc000014c

  I can not get a command code:

  SYSTEM DOES NOT BOOT:

  error in file/window/sys32/config/sys registered: 0Xc000014c

  I ran each sys, check, all right...

  SUGGESTIONS?

  Fact this link gives you ideas? What is the source of the ERD that I think you can try to use?
  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/50830310-2a38-4F27-95fb-df4ebc972f3b

• My computer compaq laptop (vista Home premium) couldn't strtup with error: starting wdfldr.sys & Wfd01000.sys critical files is corrupted. __

  Last night, when I tried to stop, he asked the "updates and downtime', I said yes.
  This morning, when I tried to start it, it has not started windows:
  He started with the Startup Repair tool... nothing can be done automatically it is written and the signature of the problem is:

  Root cause found:
  ----------------------
  Criticism of Boot C:\windows\system32\drivers\Wfd01000.sys file is damaged.

  Root cause found:
  ----------------------
  Critical file starting C:\WDFLDR. SYS is corrupt

  Any solution for this please?

  Hi saisinga,

  This error messages are usually caused due to the failure or corruption of files of drivers on the computer.

  I would first check if you are able to boot in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are unable to boot into safe mode then I suggest that you try a startup repair using the vista installation disk and check.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If restarting fails then try a system restore using the windows vista installation disc.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
  1 put the installation disc in the disc drive, and then start the computer.
  2. press a key when you are prompted.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions
  3. Select a language, a time and currency, and a keyboard method or entry , and then click Next.
  4. click on repair your computer 
  5. in the System Recovery Options dialog box, click the operating system that you want to repair, and then click Next
  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point that was created when the program or the driver has been installed.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where file AUTOEXEC. BAT AND CONFIG. SYS FILES ARE

  IAM using DELL inspiron 20 3043 ALL IN the OFFICE. In this desktop computer with windows OS 8.1.

  I want to know AUTOEXEC. BAT and CONFIG. SYS files and how to edit and edit these files in my office.

  Thanking you.

  Autoexec.bat and config.sys are older MS-DOS configuration files for 35 years and do not apply to windows 7, 8 or 10.

• Error c:\config.sys\77803.rbf and error 7370 when installin Apps in Windows Vista.

  Original title: cannot install applications on windows vista home edition - error writing to file c:\config.sys\77803.rbf, error 7370

  I have windows vista home edition. When I try to uninstall some games or other applications that I don't have, I get an error saying "error writing to the file c:\config.sys\77803.rbf, 7370 error. Can you help me on this

  Hi Robert,.

  Welcome and thank you for the post about Microsoft Community.

  It seems that you are unable to install games on Windows Vista that you found the error.

  Please provide me with the following information.

  (1) you get this error during installation or uninstalling of an application or a game?
  (2) with what game do you meet these question?
  (3) you get the same error with all games?

  Please follow the troubleshooting steps listed here.

  Method 1: Run the fix it given in the link here and try to install the game.

  Automatically fix problems of installation of program installation or remove program fails because of the installation blocked or corrupted registry keys.

  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  For reference, please see the following link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Search for the question, if it persists, then pass to the next method.

  Method 2: Turn the computer in clean boot and try to uninstall or install the game.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  See this link:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. See step 3 of this link.

  Method 3: Run Microsoft Safety Scanner.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

  I hope that solves your problem, please write to us if you have any other issue of Microsoft related to Windows.

• Laptop does not detect the DVD drive, the .sys files deleted

  Hi I have an acer aspire laptop 4752-6861, there his factory DVD player, here are the details of the DVD player:

  --------------------------------------------------------------------------------
  SlimType DVD A DS8A5SH ATA Device
  UNKNOWN media type

  SlimType DVD to name a DS8A5SH ATA Device

  Availability during the performance/power

  Direct access to the features, removable media

  Configuration Manager User Config FALSE

  DriveIntegrity TRUE

  Media loaded FALSE

  State error

  10462 KB/S transfer rate
  --------------------------------------------------------------------------------
  NOTE: (I use speccy software for more information)
  A few days ago I had created a virtual drive but could not manage to remove it later, so I tried to delete his
  the files that were the .sys files, after deleting these files he had not yet gone, but just today, I noticed when I clicked on computer, the D:
  drive was not showing (from the DVD) IV ' e tried install and reinstallin, deactivation, activation and reboot but no luck.
  in Device Manager it gives me this error status:
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  well I guess it has something to do with these .sys files that I deleted, I do not remember where the files were nore can
  I get back them, is possible to reinstall drivers or something, thanks in advanced for any ideas.   :)

  Hello

  This can be happen due to upper and lower case system registry settings.

  http://support.Microsoft.com/kb/894730

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/my-computer-cannot-detect-my-DVD-drive-in-Windows/3e232ab4-1a4c-425d-96DC-4f4dac074c60

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-required-CDDVD-drive-device-driver-is-missing/51ecd2ed-b678-E011-9b4b-68b599b31bf5

  http://support.Microsoft.com/kb/314060