Bulgarian phonetic keyboard layout

Similar Questions

• Had to get Qosmio X 70 - A - 11 Q with a Portuguese keyboard layout

  Hello

  I live in Austria but I'm Portuguese.
  I wonder if and where I can get the Qosmio X 70 - A - 11 Q with a Portuguese keyboard layout.

  I would not mind to buy it directly from the factory or wait a little longer.

  Thank you in advance!
  Shark

  Hello

  Qosmio X 70 - A - 11 Q is released for the German market with German keyboard.
  If you want to purchase a Qosmio X 70 - a model with a Portuguese keyboard, you should take the QOSMIO X 70-A-10J

  It was released in the Portugal.
  http://www.Toshiba.PT/laptops/Qosmio/Qosmio-X70-a/

• Satellite L300 - MSKLC1.4 keyboard layout creator does not work properly

  Hello

  I installed the MS MSKLC 1.4 tool. on Toshiba Satellite L300 and Vista32. This tool is to generate a clean keyboard layout.

  I wanted to implement Gujarati signs for a friend. To do this, we put signs and letters on three 'levels' in this keyboard layout:

  1 Standart "a, b".
  2. pass the speeds as "A B"
  3 Altgr + key

  The first two levels with letters not run very well, but the last of them.

  We have tested in Open Office 3.1 and MS Works Word. The two programs do not accept Altgr + key letter.
  Open Office has no special function keys altgr +.

  In an editor that comes with MSKLC 1.4, level 3 also works very well. NO problem here!

  How this can happen? What should I do?

  Jens

  MSKLC 1.4. is available:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8be579aa-780D-4253-9e0a-e17e51db2223&displaylang=en#overview

  > On a German-Toshiba A50 with XP.
  > THREE States appear Gujarati letters.

  To be honest I never tried to MSKLC1.4 keyboard layout creator but I n t think that it s a question of Toshiba.
  I think that it s related to the UK keyboard layout because he of working with available German (as you suggested).

  My personal suggestion could change the layout of the UK keyboard for the German language in Control Panel-> regional options & language control

  Check if this help

• Keyboard layout Firefox going to something I don't recognize, the traditional bed [QWERTY] as [', .pyf] no idea why this would happen or how change it back short killing firefox and restart.

  This happens rarely and randomly. At first, I thought it was my fault for cats, but it happened recently while I was attending the computer without feline interference. If someone could let me know how, if it is possible to change the configuration of the QWERTY keyboard I'll try this next time that happens to see if it can be corrected without restarting firefox. For a larger sample, I'll include the following lines:

  The quick brown fox jumps over the lazy dog
  YD. ' xpr, b urq hgmlo rk.p yd gcjt. NA, eri f

  It is make firefox only, no other programs are modified and it affects all the ongoing enforcement proceedings and news of firefox.

  See:

  • http://windows.microsoft.com/en-US/windows-vista/The-Language-bar-overview - The Language bar (overview)

  It is possible that you have activated the keyboard by accident.

  • Make sure you have the language bar visible on the Windows taskbar.
  • You can do this via the context menu of the taskbar: toolbars > language bar.
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar.
  • You need to do that while Firefox has focus because Windows remembered by application keyboard layout setting.
  • The keys by default to rotate the page layout is a combination (Ctrl + Shift or Alt + Shift) that can easily be used in Firefox to activate a menu item.
  • To avoid an unintended setting assign a specific keystroke (Alt / Ctrl + Shift + number) to select keyboard layouts and remove the key combination to rotate (Alt + Shift or Ctr + shift) layouts
  • Vista: Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence

• By selecting the correct keyboard layout on Tecra S1

  Hello

  just reinstalled the tecra s1 from scratch. I don't have the original toshiba drive more so a regular version of windows xp installed.

  I need to know how to set the keyboard to match the keyboard layout specific tecra s1. I do not recognize this provision and have tried a selection of different layouts, but they do not match. is there another provision that must be downloaded or what is the procedure?

  I'm a strong pc user, so I'll understand even a complicated procedure.

  I have to solve this ASAP.

  Thank you
  Martin.

  Hello

  I am very interested about your question, but can you give us more information or perhaps some examples.

  I put t know in which country you live and if the unit is purchased in your country. If the unit is purchased in Italy the keyboard and the OS are designed for this country and everything should work correctly.

  The regular version of WXP (language) is the same thing with the keyboard should avoid any problems.

• Need to change the keyboard layout keyboard replacement

  Hi all

  I replaced my keyboard destroyed with a PC keyboard.
  While there are many ways to Microsoft to use the keys, all I want to do is install this keyboard in the hardware section of the computer, so the SHIFT 6 shows the & button rather than the old quarter of keyboards 7.

  All ideas

  Thank you

  The keyboard layout can be changed in the language and region of the control panel area.
  Go to control panel of control-> region and language-> tab keyboard & language-> change keyboard

  Under INSTALLED SERVICES, click ADD keyboard language

  Now can go up and down, or remove the keyboard language you don t want to use.

• Satellite A100: Empty white sign Microsoft Vista watch keyboard layout creator

  Hello

  I installed the Microsoft Keyboard layout creator on my new laptop A100. When I opened it, the workspace of the program shows an empty white page only. I started it more than once, restarted the computer, but it doesn't help.

  What can I do?

  Best regards
  Bernd

  Hello

  I agree with the darkmatterman.
  The old version of Microsoft Keyboard Layout Creator (version 1.3) will work on all platforms of pre-Vista and requires version 1.0 or 1.1 of the .NET Framework.

  But the most recent must Microsoft .NET Framework v2. If you have not already installed you can do so from this place:
  http://msdn2.Microsoft.com/en-us/netframework/aa731542.aspx

• Equium L10-300 - Keyboard layout United Kingdom and language português (Brasil)

  Hello.

  I bought an Equium L10-300 and I am trying to configure the keyboard layout to the United Kingdom for Portuguese (Brazil).
  Could someone help me please?
  TKS.

  Hello

  to change this, go to control panel, regional and language options.
  Click the languages tab, click details. Here you can select the language and keyboard configuration.

  Good bye

• Broken Halo 2 PC keyboard layout

  I just bought Halo 2 for the PC and the game refuses to allow me to re - assign keys.  For example, if I try to re - before assign to E, the game tells me: "that the key has already been attributed to another action.  If please erase this action and try again. "However, I can't delete the action.  The only actions what can I delete are secondary actions in the column furthest to the right (by pressing DELETE when action is selected, or X on my controller).

  In addition, enter the product key that came with my Halo 2 PC in the MS support site does not - he said only that there is a problem with the key, I confirmed and had another set of eyes to confirm, is the appropriate key.  The key worked when I installed and activated Halo 2 PC, it works simply on the support site I have achieved via the links in the Readme of Halo 2.

  If there is no solution for the configuration of the keyboard, I want a refund.  Maybe I'm doing something wrong, but I tried everything I can think to delete the default keys without success and via google I found other reports the same problem.  There is simply no excuse to release a PC FPS with a broken keyboard layout.

  UPDATE: I managed to re - allocate almost all keys in simply re - assign to the other keys first instead of trying to delete everything first.  However, I can't reassign forward to E.  You try to set any key for E always results in the same message about it already be affected, even if E appears nowhere in the list of the key assignments.  A little makes the just useless.

  Hi Nelno,
  The question you posted corresponds to the games and would be better suited to the games forum community. Please visit the link below to find a community that will provide the best support.
   
  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx
   
  Hope this information is useful.
  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Microsoft 4000 keyboard layout

  I LOVE the microsoft 4000 keyboard layout.  This produt becomes almost impossible to find.  Are there other keyboards with this same layout?

  Hi Mary,

  I suggest you to contact the Microsoft Hardware support and check if it helps.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• How can I remove a keyboard layout?

  I used MKLC 1.3 to create a custom keyboard layout. Now, I want to change the keyboard layout. I have change the. KLC file successfully, but when I try to compile, I get the following fault messages:

  ERROR: The name of the keyboard 'Mystery' is already in use on this computer.

  ERROR: The description of the keyboard 'Language, CanIL 2012 mystery' is already in use on this computer.
  I don't want to change the name of this keyboard layout. I'm used to it. I have tried everything I know how to remove the old, nothing helps. How can I do this?
  Hi tpayne99,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it relates to the creation of a keyboard layout. It should be better in the Forums of Windows UI.

  Please post your question in the forums of development for Windows User Interface.

• Phonetic Keyboard

  I am trying to add a phonetic keyboard option to my language bar.  Even if I add the phonetic keyboard, he never appears on my in my language bar.  I can add other languages, but the Phonetic keyboards show ever.  I have Vista Home Premium.  Any suggestions on how to get this added?

  Hi maemmet64

  Thanks for posting on Microsoft Answers.

  I'm not familiar with the "Phonetic Keyboard" option   Have what language that is listed under or you downloaded a 3rd party phonetic keyboard option?

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Activate a medium custom keyboard Microsoft keyboard layout creator 1.4

  Hello

  I'm trying to creat a custom keyboard to place the letters where I want that they in a farsi/Persian keyboard.

  After days of searching I creative cam of microsoft keyboard layout 1.4 I have installed this and created the layout I want. I was also told that to do this I need Microsoft .NET Framework 2.0, which I also installed.

  the only problem is that I can't get this new keyboard that I did with the creator of with other keyboards keyboard layout in the language of the control panel settings.

  Hi wiseman3,

  Please see this link with some useful information and links:

  http://msdn.Microsoft.com/en-us/goglobal/bb964665.aspx

  If you need additional support, thanks for posting questions here:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Russian keyboard layout copy & paste function

  Hi, can someone help... When the Russian language keyboard layout is selected, I can not find the option "copy and paste". That is to say. on the keyboard of the language English his order "A" to mark the text "Control C" to copy it, then "Ctrl V" to paste in the other document. Can someone tell me what keys to select for this feature on the Russian keyboard?

  Thank you, Peter

  Press Alt in a folder window, which activates the menu bar, and look at the
  Change the menu for the shortcut keys.
   
  --
  ..
  --
  "pdesjard" wrote in message news: d308d602-10ea-49ad-9cd 1-70c8f0539b7f...
  > Hi, can someone help... What is the Russian language keyboard configuration
  > selected, I can not find the option "copy and paste". That is to say. on the English
  > keyboard language his "control" to mark the text, then 'Ctrl C' to
  > copy, then "Ctrl V" to paste into the other document. Peut
  > someone tell me the keys to select for this feature on the Russia
  > keyboard?
  >
  > A big thank you, Peter
  >
   
   

• Disable keys dead for the United States-International keyboard layout

  Hello!

  I have been using the keyboard configuration United International (see 306560 KB) for some time now and there is one thing that I find really annoying: the keys for the ' (APOSTROPHE), "(QUOTATION MARK), '(ACCENT GRAVE), ~ (TILDE) and ^ (CARET) are 'dead' in that provision, which means that they do not produce immediately a character when I press them.»

  I use this keyboard to enter German text and I did "dead keys" behavior at all, because all the German special characters (such as umlauts) can be produced by pressing the right ALT (ALTGR) while pressing another key (for example I can produce u pressing ALT GR + y). Dead keys can produce the same thing (for example pressing "follow-up of product u u) but I need them because I can produce them more easily otherwise.

  So, that's so boring on the dead keys? They interrupt the 'normal' uses of the ' (APOSTROPHE), "(quotation MARK), key '(ACCENT GRAVE), ~ (TILDE) and ^ (CARET) that you must press SPACE to have actually produce it a character." For example, I have to press on "followed by SPACE to produce the" character, which is really a pain if you use a lot of quote. "."

  So my question is this: can I use the keyboard layout United International (see 306560 KB) to type accents, but have the ' (APOSTROPHE), "(quotation MARK), key '(ACCENT GRAVE), ~ (TILDE) and ^ (CARET) behave as in the 'US' keyboard layout, so that they produce their respective characters immediately?"

  If I can avoid using software 3 rd - party, it would be great. And I think I saw somewhere that you can actually "change" somehow an existing page layout, but I have not seen anywhere how to do for these dead wicked keys.

  Thank you
  Chris

  Thanks Rohit,

  After a lot of reading, download and play with MSKLC, I derived my own layout of the provision of the US Intl without dead keys. If anyone is interested, I have published for download here:

  http://freeman2222.mywebcommunity.org/us-intnd.zip

  I hope this helps someone out there!