Need to change the keyboard layout keyboard replacement

Similar Questions

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• Need to change the key layout

  Hello
  just bought this laptop and have a problem

  "pressing time + 2 then @ (JUST COPY + PASTE IT) gives me."

  How can I reprogram it is correct?

  You can not reprogram, you just change the keyboard input language.

  It is especially the difference between American and British English.

  Open Control Panel > region and language > keyboards and languages > change keyboards > change the default input language and test it again.

• Satellite P300 - 1DT PSPCCE - how to change the keyboard

  Hello

  I am looking for documentation of disassembly for my laptop.
  I need to change the keyboard. I have 2 letters that are broken.

  Thanks a lot

  Clickservce

  Hello

  Disassembly guides are not for the public, you can download the manual on the official website of Toshiba. I've never seen there other documentation.

  In any case, exchange of keyboard should not be complicated. Just remove the keyboard between the speakers and the keyboard stand. After that, you can lift the keyboard itself but be careful with the keyboard under the keyboard cable. You must remove it also.

  Good luck! :)

• How to change the keyboard on Tecra S

  Hello

  I need a little help to replace my broken keyboard.
  I have not found any procedure here or in the user guide.

  Who is screwed, I have to remove to change the keyboard?

  Thanks for your help

  Yves

  Myself and others here are not clairvoyant so maybe you could post your model of laptop. ;)

• How can I change the keyboard on Portege R500?

  Hello everyone,

  I get a Toshiba - 10J Portege R500, with the QWERTY keyboard.
  I want to change it with the QWERTY keyboard, because I usually use the French.

  But I don't know on the net the explanation or detail to achieve this.
  Someone get some photos or some tips to change the keyboard on this laptop.

  Thank you

  Do you want really to replace by yourself and lose the warranty?
  The Portégé R500 is a portable large company and I think that it s not the cheaper one.

  In your case, I would not risk losing the warranty.
  So ask the Toshiba service provider in your country for a keyboard layout AZERY-compatible and for replacement.

  I think that it s safe.

• How to change the keyboard on Portege M300-101?

  Hello

  I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

  Best,
  Dainis W. Michel

  Hello Danis

  Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

  In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

  If you still think that you do not write anything again.

• change the keyboard from English to Korean and addition of Greek and Hebrew to the version of Word 97.

  My wife has a new laptop Lenovo with windows 7 and we tried to change the keyboard to add Korean, and we cannot.  On prvious Windows on the older PC operating system, it has allowed this and all we had to do was to toggle between the two.  My wife is Korean and wants to send emails in Korean to family and friends here and in Korea.  Was able to do so until the new laptop.

  I'm having a hard time getting Greek and Hebrew and Latin spelling, even if I checked to make them work, they do not.  I have Vista Premium on my Toshiba PC.

  Hello

  ·        Have you installed the Korean language on the system through Windows updates?

  I suggest to install the Korean language through Windows updates, then select the language for the keyboard layout and check.

  How can I get additional language files?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  Once you have done the installation of the language pack, add it to the keyboard layout, and then check to see if your wife is able to type in the Korean language.

  Add an input language

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-an-input-language

  Change your keyboard type

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-keyboard-layout

  It may be that there is a problem with the version of Microsoft office Word 97. This is a very old version and the last is Microsoft office 2010, I suggest you to uninstall Microsoft office Word 97 from the system and install Microsoft Office 2010. Click on the link below.

  http://Office.Microsoft.com/en-us/products/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Edge E320 - change the keyboard and add an mSATA SSD

  Hello

  I have an E320 of edge with I5 and 8 GB of DDR3 memory.

  First of all I want to change the keyboard which is English - UK, and I want an English-United States. Can you direct me to a link where to find parts of edge? I'm from jahpang.

  Second question, can I add an SSD slot mSATA and keep at the same time the five 7200 RPM for storage and change the boot on the SSD drive.

  I found this link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=PD015155

  so I think that it is possible, but I want a confirmation. and I found this SSD and they know E320-compatible:

  http://www.mydigitaldiscount.com/mydigitalssd-128gb-50mm-bullet-proof-mSATA-SSD/

  Thanks in advance,

  Mihai

  Hey ciurica,

  Welcome to the forums.

  the part of the keyboard, get in touch with our team of service in this regard.

  http://bit.LY/LNVsuppNum

  with respect to the SSD, yes you can. Once you have it installed, you can change the bios startup sequence.

• Where is the option to change the keyboard shortcuts in AE?

  Hello

  I am very pleased with Adobe After Effects, but how is it still possible that you can not change the keyboard shortcuts in the application? ! Adobe is well known for making very friendly interfaces, then, how is it possible that such a simple command is not the EI? There is a good chance that he will change?

  Best wishes

  Michal

  You can change the keyboard shortcuts. You are editing a text file. You can find the file by opening the Preferences dialog box and reveal in Finder/Explorer the button at the bottom of the General category.

  If you want to make a feature request, you can do so here:

  http://www.Adobe.com/go/wish

• Change the keyboard shortcuts for zoom

  Hello

  When you look at the keyboard shortcuts for MAC, the 100% zoom is broken as alt '0' of the command, and yet it is displayed in the drop-down list as 'n'?

  

  Is it possible to change the shortcuts. The 100% zoom was simply command (apple) page '0', which is now fit to.

  Can someone help with how to change shortcuts, please?

  See you soon

  G

  The shortcut by default to zoom to 100% should be command + 1.

  You can change the keyboard shortcuts in the Edit (Command + Option + SHIFT + K)

• Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Please help :)

  Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please

  Guess that's your logo. His place of 1000px

  

  Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the

  opposite of white

  

  And then resizing the image size under Select image menu and place values expanded in the dialog box

  as below.

  

  That's all. It may be useful

  Terri

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• Computer laptop need to change the HDD in the SDS?

  Have 3 questions related to the Toshiba SSD!
  1. what laptop need to change the HDD in the SDS?
  ATA, http://www.toshiba.com/taec/adinfo/ssdfacts/ so 1.8 and 2.5, I look at who is the same dimenssions and right?

  2. I have this model Toshiba R200-S2031, is it possible to change drive HARD 80-SSD 256 1.8 inches? I understand that my model has 1.8 IDE I can't take 2.5? But replace IDE ATA is possible that they are the same size?

  3. If I R500 with 64 SSD drive, can I replace it it with greater SDS and the same size of thumb? Let's say I have 2.5 64 GB SSD ich so I could replace it with 500 GB SSD?

  tnaks for answers.
  and Toshiba - thanks to make small laptops, really enjoy.
  you want to update faster, but I LIKE THEM!
  Thanks Toshiba!

  Husbands

  (1) as a general rule, all laptops can be upgraded to an SSD. If the connector on the SSD is the same as the original hard drive connector, it should work.

  (2) I believe there are 1.8 "PATA SSD available, google is your friend.

  (3) I think the R500 is using a connector ZIFF customized for the SSD drive, then you will not be able to install a standard SATA or PATA 2.5 "SSD Drive. I don't know if you can buy SSDS with the connector ZIFF, once again, google can help you.

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows