Bulletstorm question actually get to play the game :(

Similar Questions

• After playing the game the Sims 2, impossible to shut down the computer, get black screen

  Hi all

  I am running Windows 7 Home Premium 64-bit, and I recently installed the Sims 2 DVD Edition. The game itself works very well. He's not planting or lag or cause my computer is turned off. I can walk much and create characters; what I noticed is that some of the sound effects play, which is minimal.
  However, after playing the game and I'm going to shut my computer down, the screen just goes black and the computer stays on. The processor will run nothing will work. The computer just stays, but the screen remains black. He doesn't even go to the "shutting down" screen or anything. Straight black. I let it stay like that for 15 minutes just to see if maybe, it was just to take some time, but the computer still shuts.
  It normally stops if I do not play Sims 2.
  Original title: Sims 2 causing my computer does not shut down properly?
  I think I have Directx 11, because when I installed my graphics (ATI Raedon 7770) it updated automatically to that. I play other games like Skyrim here, which does not cause this weird close the thing. I installed the patch from EA Games for the game itself, as well.
  Help would be appreciated, because I'd really like to be able to play Sims 2! If one of the expansion packs resolves that it be so. Anything to solve this problem!
  Thank you.

  Hello

  According to the Windows Compatibility Center, the Sims 2 game is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=the%20Sims%202&v=EA&UID=1&l=en&pf=0&PI=0&s=Sims%202&OS=32-bit

  Method 1:

  I suggest you to install the program in compatibility mode and check if the problem persists.

  Please visit the sites below:

  To uninstall a program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install a program in compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, then I suggest you to contact the program provider for assistance with the issue more on the site:

  http://support.EA.com/

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

   

• Why not the menu of Zoo Tycoon 2 to properly play the game televised?

  After I loaded the program, he will play through the introduction, but when it gets to the menu, the writing is huge and will not allow anything beyond this point. You can't click to play the game.

  After I loaded the program, he will play through the introduction, but when it gets to the menu, the writing is huge and will not allow anything beyond this point. You can't click to play the game.

  Hi, e. Boyd,.

  Your system meets the minimum requirements?

  For product support, information, including issues of common interest, fair questions, useful links and tutorials, visit the Zoo Tycoon 2 Solutions Centre .

  Check this page

  http://zootycoon.com/support/TechSupport.htm

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Not able to play the game Metro 2033 on Windows Vista-based computer.

  I just installed the game Metro 2033 on my Vista system that uses a 1080 screen.  In fact, I have two identical screens.

  The game requires activation Steam and Steam normally will attempt to update the program rather than simply enable it during installation.  This leaves a person in the dark as to what happens during the installation.

  It turns out, I use a 3G modem that Steam refuses to support their network of Bit Torrent, so download speed for an update of a concert is around 12 kb/s or 8 hours to make the point on a program that has not yet installed.

  After work, I was quite surprised to find that the program would not go on Steam.  He then took a few hours to find out that there is a solution, that I could load the game by running the executable file that had been installed in the directory Steam for Metro 2033.

  Unfortunately Metro2033, when started this default way a unknown screen resolution.  Thus when the game is started from the Steam directory nested, one gets a message "out of range" on the display of 1080 and nothing can be seen.

  Short of launching the game out, I tried the game again, to my great joy, the second run displays a safe mode issue and I ran it in safe mode.  It is quite an exciting game and I played it all night.  However, I had also contacted support original THQ regarding installation problem/solution.

  Then I fell asleep.  The PC was on.

  The next day, I played the 2003 Metro game again, but I entered in some difficult areas of the game, and I had to reload the saved game.  After awhile, I opted to exit the program.  Later, I started the program, but this time I inadvertently clicked on the Metro2033 icon who had installed Steam.   In my solution, I had pasted a link to the directory of Steam under the original icon and had pressed the wrong button.

  Of course, the first thing I saw, after playing the game for 12 hours, was "out of range".  I opted to return to the office...

  ... However I couldn't come back on the Vista desktop.  I have a 7000, and even Microsoft Entertainment keyboard by pressing the buttons of Windows or Media center wouldn't let me come back to the office.

  The day before, I needed to do this that I've experienced to workaround to start getting and I noticed that the only way I could get on the desktop to run the Task Manager to kill the out of range on my screen message has been to press the Media Center button.

  Once the Media Center menu on breaking the subway 2003 menu I could then enter the office and use the Task Manager.

  However, the next day when I inadvertently started the STEAM version, and again, the screen is become black and says 'Out of Range', I found that my system was stuck in this loop.  No way to get in the Manager of tasks at all, not even with the Media center button on my keyboard.

  Now the background of my question.  When I was forced to start my system again, I noticed the normal BIOS screen and the bar of Vista with Vista is loading, then the familiar sound of Vista boot, but now NO SCREEN at all on startup!  Now, something had inserted a driver in my Vista start which forced my display say "Out of Range" from the start of the desktop of Vista and Vista computer has not yet noticed this.  Normally, I would think that they claim that the screen resolution is wrong and put it on, instead, nothing else than the out of range message rigid or flexible boots.

  Original title: can someone tell me what happened here? Metro2033 and steam game.

  I checked by plugging my second monitor.   The system has Safe Mode startup and I was able to do a restore of the system from the previous day to evening to return to the office.   However, I am quite confused as to what happened.  How the Metro 2033 problem "out of range" migrate to Windows startup by running an update of Steam?

  I use the latest service pack for Vista.

  
  

  It seems that the STEAM snuck in an update and then everything worked fine.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to play the game run runtime error: 3.

  Original title: runtime error #3 (trap)

  When I try to load my pc game it comes up with the runtime error #3 (trap) how to solve this problem or the chance to play the game.

  Hi Robert,.

  It seems that you have problems with the game play, you get the runtime error: 3.

  To help you with the problem please answer the following questions:

  1. you play games online? If so, which browser do you use?
  2. If you are referring to the game installed on your computer, what is that?
  3. What is the exact full error message that you receive?

  4. did you of recent changes made to your computer?

  If you play games online with Internet Explorer, you can read the following article.
  
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  
  Also check out the following link:
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Impossible to play the game downloaded on Windows Store

  Today, I downloaded two games from store Windows. I played a game with one and it must next after that it took less to play.

  It will not play.

  How can I play them.

  I didn't know how to start the new question. I don't know much about computers

  Thank you

  Kathy

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/i-am-having-problems-after-installing-a-game-game/cef0ef06-bb9d-4016-9d30-a7f9f10fa63c

  Hi Kathy,

  1. which is the game that you are not able to play on the computer? The problem is specific to this game?
  2. think you that same question when using other applications on the computer?
  3. What is the accurate and complete error message you get?

  There could be several reasons why you will not be able to play the games. I suggest you try all the steps from the following link:

  Solve problems with a soft
  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Post us the results after trying the steps above.

• Bought a WNR2020 and is no longer able to play the game "LINE: Disney TsumTsum.

  I replaced my old equipment with NETGEAR N300 wireless router with antenna 5dBi external high-power (WNR2020v2) recently and now I'm not able to access the LINE: Disney TsumTsum game on any device (phone or Tablet) when it is connected to my home network. The error I get trying to connect to the game is "error code:-1 cannot connect to the game." Network is unstable. Please wait a moment and try again"all other internet activities seem to work very well, and if I disable the wifi on my phone or connect to a different wireless network, far away from home (phone and tablet), I am able to connect and play the game very well. I left all the default router settings and double checked that there is no blocked sites or on parental controls.

  Someone at - it ideas? I contacted the creators of the app if you count the necessary special security settings, but they have been no help.

  Just to update everyone, I finally got this work (and I don't know why it works). I updated my DNS server Google public DNS servers and I am able to connect properly to my game now. My ISP is Comcast.

• When I play games on pogo or facebook window pop up to play the game is too small.

  Original title: popup screen too small__

  When I play facebook or pogo games windows is too small to access all the button to play the game.  It was ok earlier in the day, but now the screens are too small.  Is there a way to revert to the original?

  Hello
   
   
  1. what the text on the Web page? Is it too small?
  2. is it a problem with these two games only? Have you tried to play another game on facebook?
  3. what Internet browser are you using to play these games?
   
   
  Method 1.
  You can try the following steps and check if the computer gets you the expected size of the screen.
  a. once the pop-up window click on it.
  b. hold down the button and use the mouse wheel to scroll and check if it changes size.
  
  Method 2.
  If the problem is different I would ask you to send us the screenshot of the problem.
  Follow the tutorial below to download the screenshot.
  http://social.answers.Microsoft.com/forums/en-us/vistaassistant/thread/ca5463aa-ec2f-4497-8cc4-cfe7fd5861e6
   
  Looking to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't play the game full screen

  Original title: gambling problem
  

  I have 1 question... Why when I wan games of tricks... can't full screen... but I already put in video to the game for the full screen... option a lot of game I folds... but still the same

  • i using windows 7 Home Premium

  Hello

  ·        What games you try to play?

  Follow the steps mentioned below.

  Step 1:

  a. the game .exe file you want and click right on this.

  b. Select properties, and then click shortcut.

  c. in run select maximized and click on apply and OK.

  Now, try to play the game mode full screen and check if you are able to play.

   

  Step 2:

  Adjust the resolution of the screen at the bottom and check if you're able to play games full screen. See the article mentioned below.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fallout3, complete Crash, whenever I play the game

  Whenever I launch Fallout 3, it wont let me play for about 5-10 minutes (I timed havn't, but it seems to be pretty random) and then the computer will turn off by itself. It happens with some other games that I tried as well, but so browesing im internet or fun with a broweser-based game, everything will work fine as long as I'm leaving the computer or until I have play Fallout 3 or other games.

  Windows 7 Home Edition:
  Processor: Intel Core 2Quad CPU Q8200 2.33 GHz 2.34 GHz
  RAM: 8,00 (3.25 usable) GB
  System: 32-bit operating system

  Oh! And I play the game on a bass-model system that has run the game using only basic graphics and it does not. This computer is high, along with the game and more than double its needs.

  Also, I got the computer checked and re-checked carefully manually and with Norton antivirus, and everything is clean in all areas.

  I can't find the answer anywhere, please help.

  I heard about what past a lot actually. In addition, this game is BUUUUUGY.
  People have tried a number of things to fix it and who knows what will work for you. I will list what I found (in no particular order)

  • Reset your default controls
  • Reinstall .NET Framework (because Fallout 3 apparently installs a Beta version on your machine - which is just nasty)
  • Delete some/all of your saved games
  • Update your drivers
  • Update directX
  • Make sure that the value of transparency in low water
  • Make sure that the game is patched
  • Disable all mods
  • Update your audio driver (if the last update doesn't work, try the beta version if you feel lucky)

  I wish there was something I could tell you, but it could be really huuuuge several things...

  Source: http://www.tech-forums.net/pc/f15/fallout-3-crash-desktop-solution-here-189880/

  Good luck!

• My computer ran out of battery og by practicing a game and now I can play the game

  I played the game and my computer Asus ran out of battery and now I can get into the game, but I can't get to the game side where ist the game loading and then nothing happens. I can press enter the game is shot?

  What can I do about it? Problemsignatur
  Problemhaendelsesnavn: APPCRASH
  Programnavn:Westward_IV.exe
  Programversion:0.0.0.0
  Tidsstempel program: 4b0191c9
  Fejlmodulnavn: Westward_IV.exe
  Fejlmodulversion: 0.0.0.0
  Tidsstempel for fejlmodul: 4b0191c9
  Undtagelseskode: c0000005
  Undtagelsesforskydning: 00332560
  The system version: 6.0.6002.2.2.0.768.3
  Landestandard-id: 1030
  Verder information 1: 3 c 19
  Verder information 2: a54aff084bd449456520e45e3ff5da41
  Verder information 3: e6e5
  Verder information 4: 29792ad77aaf48c26609c1ab7d180d9c

  Hi Shannon,

  Welcome to the Microsoft Answers community.

  This is because the computer was arrested while playing game. The game files might have been corrupted.

  Method 1: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.
   
  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  Method 2: If the same problem then I suggest to uninstall and reinstall the game and check.

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Black screen when playing the games

  I play several different types of games on my computer and just recently, I noticed that when I attempet to Alt + Tab to go to my office or a different window, I get stuck in a black screen with only the mouse showing sometimes. This came only in the last week and went with all the games that I played. I managed to make Ctrl + Alt + Delete but can only solve by making the system to reboot. All playing the games themselves, I don't encounter any problem, but only when I try to go to a different window that already passed.

  Help?

  Well, nothing has really changed, you can try the system restore and restore a week ago and see if it solves your problem.