BURN TO CD OR DVD

Similar Questions

• Carpet * a UJ - 831S: cannot burn a CD or DVD, but possible burning RW media

  Hello
  I have a really strange problem when I burn cd or dvd (any brand) I can't do that, but I can burn a dvd RW or cd RW. When I try to burn normal dvd, his show "Please put a blank or rewritable dvd" and when I try to burn normal cd its burning but sometimes 10% and 90% time.
  his wird becase when I burn cd - rw or dvd - rw (any brand) everythink is ok (still) and I have no problem with reading any cd or dvd.

  I don't know that my dvd is ok or I have to buy a new one?

  Please help me.
  you are my last chance...

  Hello

  Looks like the lens can not calibrate correctly.
  The objective must be calibrated before using the media. Each media need to another status to calibrate. If this calibration doesn t work properly the drive cannot read or write media.
  Well, in this case there are not a lot to do.
  The drive needs to be replaced.

  But have you checked if the engraving option has been enabled on the drive? If this isn't the case, in order to check it out.

  -Right-click on the DVD drive-> properties
  -Go to the menu point record
  -Enable recording for the DVD player

• Satellite A350-20s cannot burn any cd or dvd

  Hello

  I have a problem with my dvd player. I can't burn a cd or dvd.
  I tried with several blank cd brand and dvd with Nero and I still have the same problem.

  The software crashes without an error message.

  I need your help.

  Thank you.

  Hello

  Are you trying to copy disk protected from copyright?
  Maybe this is not possible due to some restrictions
  If not, you should check to see if an update of the firmware of the player is
  If it is available, then you should find it on the European driver Toshiba page.

  Last but not least if may be a hardware problem, but the ASP must be contacted as a last resort. I mean in the majority of cases, the CDs and DVDs used is responsible for these issues
  I had this problem too and able to solve using another brand I m now with TDK-R discs

• Satellite P755-S5262 cannot determine if the DVD drive can burn a CD or DVD

  I recently acquired the P755-S5262 and cannot determine if the DVD drive can burn a CD or DVD.

  The description of Toshiba wrote:
  Drive DVD SuperMulti (+/-R double layer) supporting up to 11 formats but I can't imagine that a laptop of this caliber cannot burn a CD/DVD.

  I can't find an answer or a description nowhere else.

  Someone on this site/forum can answer my question?

  Hello

  The CD/DVD drive can burn CDs and DVDs

  I recommend using compatible diskettes... I use TDK and DVD r CD and they are really cool

• Pavilion 6000: cannot burn pictures on a DVD + RW on my hp Pavilion 6000 (drive is hp DVD A DH16A BLH)

  I can not burn pictures on a DVD + RW. I use Verbatim DVD + RW discs. When I try to burn photos, I get the message "Please insert a recordable/writable disc". I can burn photos to a CD, but I want too much DVDs!

  Help, please! I am not technically minded so please keep this in mind when replying

  Across the Atlantic, it seems that way. If you put in a DVD movie is the little icon for the disc switch to reflect the title of the movie? The test would be if you can boot from a bootable DVD as a Windows 7 install disc or any other bootable DVD. We strive to rule out hardware vs software and if the DVD player works before Windows starts so the problem are software and a replacement of the drive will not help. If she can't boot from it, then it's a hardware problem. It is not the upper and lower part thing of filter, you can fix with the automatic setting of Microsoft or it wouldn't work for the CD, either.

  You can also try a disc cleaner for the lens that you can buy at any store that sells a lot of DVD movies.

  So before you buy the replacement, try my suggestion above, if you can. In the contrary case, it sure looks like material.

• How to burn video files to DVD

  How can I burn video files to dvd via laptop?

  Created a video using a webcam and my laptop has a dvd / cd/cdr drive to play and burn. I do not know how to burn my video to dvd... any input please? In advance thank you!

  You will need a third party software that will convert and burn the video file. If you want to be able to watch the video at home or auto dvd players you will need a software who authors the file as well. I prefer Ashampoo Burning Studio 10. You can download and get a free trial from the link below. It is an excellent program and well worth the $15.00 you can buy it for after the expiration of the trial period. There may be some restrictions on the trial version but, I'm not there.

  http://www.Ashampoo.com/en/USD/pin/2610/Burning_Software/Ashampoo-Burning-Studio-10

• Media Center XP tells me that I need a burner to burn a cd or dvd. It's never happened before. What Miss me?

  I am trying to burn a recorded TV DVD, and all of a sudden, Media Center says that a recorder is required.  I can't understand what has happened.  I tried to run this set of codes, and it does not work.

  %windir%\ehome\CreateDisc\PxShare.exe/i
  %windir%\ehome\CreateDisc\pxhpinst.exe
  %windir%\ehome\CreateDisc\SBEServer.exe/regserver

  Thanks for any help.

  Hello

  Microsoft Windows XP Media Center Edition is included in your hardware device or system, the hardware manufacturer provides technical support and assistance for this software. The manufacturer of your may have customized the installation with unique components such as specific device drivers and optional settings to maximize the performance of the material of this manufacturer. If you need technical help with Windows XP Media Center Edition, contact the manufacturer of your directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware.

• How can I burn and watch a dvd on my windows xp. and what do I do

  I want to know how to burn DVDs, s under windows xp, and I have to be able to do

  To watch DVDs, you need to install a DVD decoder...
  or download, install, and use a media player like VLC.

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  ===

  If you want to burn video DVDs that will play in a
  DVD Player standalone you need DVD Authoring
  Software.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• My windows dvd maker Burns single photo slideshows on dvd and wont burn your movies on DVDs without stop, does not burn even the windows sample videos

  my creation of windows guard dvd stop responding and stops whenm I am trying to burn a video on dvd. the only thing that it will burn is a photo slideshow

  a different view on the same subject, I downloaded the recommended free dvd burner called wondershare and it works fine. I think that one of many tbhe updates of windows, I had since the last time I was able to burn a video dvd, must have corrupted, that of why I wanted to reinstall it but can't find a download on the windows software download for it

  =======================================
  I don't think DVD Maker can be reinstalled, but at least
  you have found a solution.

  If you happen to have Vista Movie Maker 6.0, you can
  disable the filters inside and creating DVDs should be affected.
  Reach... Tools / Options / Compatibility tab.

  See the following link:

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
  (scroll way the lasf FAQ):
  «What can I do if am having problems with video filters in Windows»
  DVD Maker? »

  See you soon.

• Why is there no option to burn pictures on a dvd in the photo gallery for windows vista

  I try my best to find a way to BURN a DVD of my photos that I had downloaded in windows live photo gallery, or windows photo gallery.
  I even try to find a way to burn pictures on a DVD via windows developer.

  NO LUCK.
  It isn't even an option anywhere to BURN a DVD.
  There are options to post on twitter or facebook, NO I need or can use.
  There is even an option to copy on my computer, I do not need.

  I have a lot of photos that are on windows live, and all I have to do is burn or create a DVD, so I can send it out, but there is simply no option for this?

  I have windows VISTA BASIC.

  "I checked up on top of the windows for the info site, and he mentions to click on the" "burn the dvd icon" ", but IT is there NO SUCH BOTTON of CLICK ON MINE :>>>

  I hope someone could help me with this frustrating problem

  Vista Basic does not include Windows DVD Maker.

  If you want to burn a data DVD, you can use Windows
  Media Player, check the following links:

  Windows Vista - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you want to burn a video DVD that will play like a movie
  in a free-standing DVD player... you need Authoring DVD
  software.

  First... Create your slideshow video with Windows Movie
  Manufacturer and publish (save) in the. Film WMV format.

  Windows Vista - put on the road with Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Then you need DVD Authoring software to create video
  DVD... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• How will I know if I have a dvd burner? It says: dvd-rom/cd-rw on the console

  How will I know if I have a dvd burner.  It says: dvd-rom/cd-rw on the console.  I just upgraded from Windows Vista to Windows 7

  She say on the front door of the oprical drive?

  Readers of DVD-ROM DVD.

  DVD - RW is a burner.

  CD - RW CD burns.

  Apparently, you have a combo drive that will read... DVD and CD and burn CDs.

• Download a DVD Maker and burner in order to burn pictures on a DVD

  I guess I have to download a DVD Maker to my Home Basic Windows Vista model T3646 H32 version to burn pictures on a DVD, a DVD burner.  How can I get downloads and what are the indications for do?

  Hello Miss Roxane,

  Thank you for your message.  You can look in Windows Live Movie Maker for free option to make a slide show and burn it to CD or DVD.  You also have the possibility of purchase of download/3rd party software that will do the job you're looking for.

  I also move this thread to the programs Forum.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I burned an AVI to dvd with windows media player, but there is no audio data. What has gone wrong?

  I burned an avi file which was a movie to a blank dvd but therfe was no audio recorded.  What has gone wrong?

  I burned an avi file which was a movie to a blank dvd but therfe was no audio recorded.  What has gone wrong?

  ====================================
  There are several types of AVI files, and they can
  be problematic. Maybe the info would be
  be interesting reading... good luck.

  If you want to just put your video on a DVD for
  for archival purposes, you would create a data DVD.

  See the following article:

  Windows 7 - burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
  (See "to burn a disc using the ISO image format")

  To create a video DVD (which will play in)
  a free-standing DVD player)... you need DVD
  Software authoring as Windows DVD Maker.

  See the following articles:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  If you still have problems, the AVI may need to
  be converted to WMV format before burning.

  There are to many converters available on the net...
  some free, some details... the following freeware is
  just an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the WMV icon at the bottom of the screen.

  The 'WMV output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  That should do it...

• I have only 300 GB, I discovered that 32 of the tokk games up to 3.32 GB. Can I burn it to a DVD and use them like that?

  I have only 300 GB, like I had more but don't know how to do in this regard. I win a lot of Bigfish games, I discovered that 32 of the tokk games up to 3.32 GB. I have more than a hundred of their games I bought so I hate to remove them. Can I burn it to a DVD and use them like that?

  I may be possible. There are several factors that can stop the games run from a DVD.
  A better option for success would be to use a USB stick, but I'll be referring to DVD.
  The kind of games that you download big fish are more likely to be able to run from a DVD a lot of games. The best way to know is to burn on a DVD, but the process will be a little tricky when you burn the game to the DVD it will change the installation path (from C:\ to the drive letter of your DVD eg - E:\).
  You can try the following-
  -Copy the folder of games on DVD

  -Rename the folder the game is installed on the HARD drive. Just add a few letters before the name of the game, for example, Bejeweled to aaa Bejeweled.
  If the experiment fails, simply remove you the extra letters and plays the game.
  (a) - If you do this, you go back to the original name to uninstall the game if you want to later, and the Launcher of Big Fish (or what is called the Big Fish program) may have a problem when you rename the Games folder as well, so don't try to run the game from the Big Fish app to use a shortcut.

  -Make a new shortcut to the games .exe in the folder that you copied to the DVD. and see if the game will be launched from there.
  (a) you must always change the path on the new shortcut if it still reads
  the original location of the game is installed.
  To do this, you change the drive letter in the properties (R\Click on the shortcut)
  in the original example - C:\.  There are two places you need to do this-
  'Target' and ' start in '. If the name of the games is long, it may be easier to copy the
  'Target' in Notepad to reveal the path drive. You can change the path of the reader here and then copy and passed to the 'target' box in the properties of the shortcut.
  Do the same with "start in" if necessary.

  If you have a lot of video or music, then they would be more suitable for playing from a DVD.
  If you are running low on HARD disk space the best option is to install a second drive HARD a 500 GB HARD disk is cheap, better value for money than a USB key and easy to install.  There are many tutorials on the i-net for installation
  a HARD drive.

  .

• Can I use any disc burning program to create DVDs from en "DVD folder"?

  I wonder if I create a DVD folder in yet that I can then use it outside of Adobe applications and burn to disc.

  When I create my final product in still, it shows me the possibility of my output as a "DVD folder" project instead of maybe a "DVD" where he would have been burned immediately. I want my project to be transferred to a person who can produce discs in bulk and/or so that I can burn with, say Windows DVD maker. What is the way to do it?

  what you want to do is to select "DVD image!

  This will create one. ISO file (disk image) which can be burned to disc

  using any number of programs still including DVD burning!

  

  HAHAHAHAHAHAHAHAHAHAHA!