Burner DVD Electronics Pioneer DVR-TD10RS

Similar Questions

• Pioneer DVR-K16S can no more read on DVD-R media

  I just updated my BIOS a few days ago. I don't know if it is related to that, but my DVD player can read either any media DVD-R or DVD - RW.
  He can still read DVD + R and DVD + RW as it was.
  I tried to find a firmware for my Pioneer DVR-K16S but did not.
  Please try my find the firmware I'm looking for help.

  And what model of laptop you have exactly?

  It seems that ODD drive has a problem of calibration and impossible to define the objective in the right position. What do you think about this?

  May is the time for a new drive.

• Cannot use k16a Pioneer DVD to burn DVDs on Satellite Pro A

  Hi every1

  I got using DVD Pioneer k16a PC Toshiba laptop

  The thing is while I'm trying to burn DVDs system does not recognize.
  I can burn CDs.

  Tried to update driver and reset DMA but does not.

  Has any1 familiar with this problem?

  Thx for your time.

  Hello

  Have you tried burning different s DVD?

  I remember my laptop couldn't t burn on Verbatim DVD I tried the TDK and finally the driver CD/DVD burned as DVDs

  Did you use a burning software? Which one??? I use Nero. It of great!

  It would also be interesting to know if an engraving error message appeared

• Burned DVD - Equium A60 playback

  Hi guys, I was wondering if someone can help me. I have an Equium A60-692 with a Pioneer DVR-K13A CD-ROM drive. The current problem I have is that whenever I insert a DVD that was previously burned, not only by my pc, but others that the CD-ROM drive is unable to read. DVD, that I created in the past that worked very well also stopped play. All I get is the orange led flashing first and then rest it perminently on resulting in a failure in the dvd playback. The player plays original DVD movie very well and plays also any form of cd. Do you think the reader is endangered or is there a setting that has been changed? Any help on this would be greatly apreciated.

  Best regards Richard

  Hello

  It's not easy to say why it of not possible to read the burning DVD.
  You log out of engraving? Sometimes the medium cannot be read because the sessions of burning are not closed. But this is only possible if you burn CD/DVD several times.
  The second possibility could me not supported way. You must use different media.
  However try to remove you drive the Device Manager and reboot the device. The operating system should recognize the drive again. Well maybe this procedure will solve this problem.

• I am not able to burn DVDs on my Satellite A60

  Hello!

  I have a Toshiba Satellite A60 with a Pioneer DVD - RW DVR-K13A. And whenever I try to burn a dvd, it does not work. The drive detects the dvd but I can't burn. I tried several burning such as folder software now! and Intervideo WinDvD Creator. What I need to upgrade the burner or something.

  And the format of the dvd are DVD - R and I checked the manual, and it says: I am able to burn DVD-R.
  Thanks in advance.

  Post edited by: Slintas

  Hello

  This path is not easy to tell if there is only a few small problem or maybe a malfunction but from your description, I assume that the reader can read but not write DVD media. In this case, it is really possible that the drive is faulty.

  If you have tested with different DVD media and the different burning applications, I'm pretty sure that the drive is faulty.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• Pioneer DVR-KD08 issues on Windows 7

  Hi!, I'm asking here beucase is my last choice... I had Windows Vista Home Premium installed on my Sony Vaio VGN-CR460F, which has the CD/DVD Pioneer DVR-KD08 ATA attached... but well, there is NOT a driver for the CD/DVD drive... that's why sony vaio using a driver Optiarc AD - 7260S... but the problem is the following:

  After installing my new Windows 7, the software did not recognize the driver Optiarc AD - 7260S, he places a 'Pioneer' Driver, but this driver does not work... and when I try to find any other driver, he says that he's already been materialized, so he won't find all...

  The first question is: where can I find a driver (driver Optiarc AD - 7260S) so I can install it MANUALLY (with no configuration... it doesn't let me install if is an installation program)

  Now... After looking for drivers, I went to Sony ESupport Page... and I have downloaded the updated driver Optiarc... but when I try the update... it wont let me, because windows 7 recognized the Pioneer drive (it was like optiarc in vista back then) since windows 7 recognizes the Pioneer drive... Optiarc UPDATE or even used Driver SETUP I would install it... (It is said: instalation error, there is no Compatible drive...)

  So mi second question is: How can I update my drive with the update installation program? ... Given that windows 7 recognizes the drive as pioneer... it says it is not compatible with the installer! ...

  I ask this because after upgrade my Windows Vista to Windows 7, the player collapsed to be able to read or write any DVD or CD, I tried to make it work with Mr Fix It Windows... and deleting the LowerFilters and UpperFilters registry... Then please don't answer that...

  I just need one manually to install my driver to make it work.

  Thanks :)

  Hi RoZuRiGo,

  1. What is software that does not recognize the drive?

  You can first try uninstalling the software Pioneer.

  Step 1:

  Uninstall the drivers Pioneer

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the game sound and video controller in Device Manager

  c. right click on the audio device and click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  Step 2:

  You can check the following link and try to install the firmware in Vista compatibility mode and check.

  http://www.Sony-Optiarc.EU/SupportService/downloads/fwdownloadpages/ADseries/ad7260sfwfile.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• How to burn DVD when my Mac Mini is not a taken SuperDriver support

  I made iMovie project. When I wanted to create iDVD project I received a message < Your Macintosh has not have supported SuperDrive. Please note that while you will be able to work with the iDVD project, you will not be able to burn a DVD disc >

  OS X El Capitan

  Mac mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Iris 1536 MB Intel graphics card

  Any body knows how to burn DVD when my Mac Mini does not support SuperDriver.

  Thanks in advance

  Prangins

  1. Purchase an external optical drive
  2. borrow an external optical drive
  3. get use to another Mac equipped with an optical drive

• Burning DVD - R

  I recently bought a laptop TouchSmart tx - 1027ca, as well as support for laptop from HP that I have the laptop usually sitting in tablet mode.  I was wondering if the DVD can be burned at this angle, or if it must be flat on my desk.  I use currently stand is more high angle, but I guess I want to know if it is possible to burn at any one of the three angles.  Also, assuming you can burn at this angle, y at - it no worries about data not being not saved properly compared to if the laptop flat seat.

  I'm sorry if this seems to be a stupid question, but I couldn't find the answer anywhere and just wanted to be sure.

  Thank you very much in advance,

  J..

  OK, ok... just for the pleasure of making this post solved (which I hope it will be Lethal), yes you can burn DVD-R at any angle with the support and there is no data corruption. (This can also be confirmed by the fact that some desktop computers are designed to lie flat on a desk like standing vertically in a position to 'tour' and it is possible to burn media in this position without any problem).

• Equium A100 - CD is no longer burning but still burn DVD

  Hello all you have a problem with my laptop recently I tried to burn a cd and in any program I use says something wrong with the disc etc and burn a little and displays the status bar.
  But I can still burn DVD so I am confused help much appreciated.

  Its model Equium A100 - 306 XP

  Hello

  Try to clean the laser lens with a cotton ball and alcohol tip.
  In my case it helped to solve a similar problem with an optical disk drive.

  But be careful when doing this!

• Satellite Pro L650 - ODD cannot burn DVDs

  I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help

  Can you please tell us which laptop model you have and what operating system are you using?
  Your optical disc drive can read the DVD?
  What burning software do you use?

• A60 burned dvd problem

  Hi help
  Bought equium a60 to burn DVDs using clone, but after about 40 min when watchingburned the picture begins to break up and him freezes

  Hi Kat

  I use the Nero Burning software too and it works great. I t n have no problem. In my notebook, it is DVD multi burner, and I can burn CDs and DVDs successfully. I put t think Hat overheating may be responsible for this.

• Burn DVDs on a60

  I just bought an ea60-155 how can I burn DVD it seems to be no software for this

  Hey Kevin,

  you need software such as Nero or CloneDVD for dvd burning. Most of the programs that you can download from the internet. But after a while, you will have to pay for them.

  Good bye.

  Michael

• After the last update can not burn DVDs

  Current enforcement 10.11.4 on Imac I5, end 2013 with external dvd player from Sony. Always had trouble make him start to burn but now can't burn DVDs at all. Get connection errors, low connection errors and even several icons on desktop DVD. 14 with good quality dvd using toast. USB is connected to the directly to the mac. ResetPRAM, transported to various ports usb. Sometimes dvd will go up but not available or when you are ready to burn receive error messages. Before last update worked most of the time. Such a simple tsk, which has always been a test since the disc removed.

  Try reinstalling the toasts with the connected reader.

  If this does not work, try resetting the SMC: reset the management system (SCM) controller on your Mac - Apple Support