Pioneer DVR-K16S can no more read on DVD-R media

Similar Questions

• DVD - RW DVR-K16S can no longer write to CD.

  Please I'm looking for a solution for my dvd rom DVD - RW DVR-K16S who has stoped writing on CD. When I started writing something on a CD, a message appears saying ERROR WRITE. Now I'm confused. I don't know if it's the cd rom that is damaged or there is a software problem.

  I tried a burn with a different software. All proved futile, the drive can read DVDs and CDs, the only problem is burning.

  Remove the device from Device Manager, then restart the unit. After this check in the Device Manager, and if everything is ok check disk properties and activate the CD writing.

  Test again.

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• I can be more open with my Windows Media Player video

  When I go to my msn, or shaw email.when, I'll open a video someone sent me I get the message: Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  He started last week, as then I was able to open it?

  Hello

  1. what version of Windows Media Player is installed on your computer?
  2. have you made changes on the computer recently?
  3. What is the file format of the video file?
  4. is this a video online that you are trying to play?

  Method 1.
  Try the steps listed for Windows XP in the article below and check.
  You cannot view, add, or remove items from the Windows Media Player library
  http://support.Microsoft.com/kb/925718

  Method 2.
  Refer to the procedure described in the article below and check.
  Resolution of the problems of reading in the Windows Media Player for Windows XP
  http://support.Microsoft.com/kb/306317

  I hope this helps.

• Why PS/Bridge CS6 can no more read metadata BULLIES after update?

  There was an update today and now all my .xmp files are either deleted from my partner 1DX Canon RAW Images. The new update deletes these files or cannot read the metadata of the RAWs. I have RAW and JPEG and I see that the info is always associated with JPEG files.

  Also - I can't write or modify the RAW info to assign copyright, keywords, etc..

  I'm on a Mac Pro running OS X 10.9.2

  Do you have disk cleanup tools like MacKeeper/CleanMyMac installed?

  Please see

  http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html

  Kind regards

  Ashutosh

• Why my laptop used more read the DVD. says I have no decoder?

  When I first got this laptop (vista) it played DVD, now it does not work.  Says I need a decoder

  Hi, Chris,.

  Do with Roxio and Cyberlink software?

  Did you uninstall software recently?

  To check if the DVD decoding software is installed, right click on command prompt and select run as administrator

  Type the following: dvdupgrd / detect

  Press enter

  You should see a message with the software brand

  Resolution of the problems of reading

  http://Player.InterActual.com/help/support/articles/0137.asp

  How long it lasts?

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

• Can't burn files to DVD, error: "Media is not recognized.

  Original title: cannot burn files to DVD

  I am running Windows XP. I tried to burn different files on discs DVD new (e.g., Imation DVD - RW and RiData DVD + RW). I tried using Easy Media Creator 9, AShampoo Burning Studio ^, a Windows Media Center to burn my DVD discs (especially JPEG photos). In each case, I get the error message that my "media" are not recognized. This player will play music but it not "burn" my photos. Help, please!

  Hello
   
  1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
  2. have you ever burned a DVD using this DVD player in the past?
  3. are you able to burn the CD?
  
  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems
  
  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/
   
  See also:
  Windows XP CD Burning Secrets
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03september16.mspx
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite 5200 903: can't read my DVD data burning

  Hallo,

  I have a problem with my DVD/CD-ROM. He can no longer read my DVD of data (backups of my hard drives) that I burned with the same. Also it can read the DVD movie only after I put the DVD in and out a couple of times. He has no problem with the CD.

  Don't you think it's a software or a hardware problem.

  Thank you
  Matthias

  Hi Matthias,

  This sounbds as a problem of possible material for me. As you know that the laser must be re-phased to manage the DVDS and allowed tolerances are much smaller. So your device can handle CD correvtly but fights with DVDs.

  Have you tried cleaning the lens on your DVD-ROM, this can improve the situation for you.

  Good luck

• Sam L20-183: Pioneer DVD - RW DVR-K16S cannot read DVD

  Hi all!

  I have the Satellite L20-183 with Pioneer DVD - RW DVR-K16S player. This is a new computer, I bought it a week ago. The problem is very strange, after several days of use of the laptop drive does not read or write DVD! The process of reading or writing with the CD is excellent. Who is wrong? I didn't change the firmware or something like that. I don't really know what to do. I can't reinstall the system since the Toshiba Recovery dics's on DVD and it won't start...

  Help, please

  email: [email protected]

  Artur

  Hi Artur

  Try to remove the drive from Device Manager and reboot your device. After restarting the OS should reinstall the drive. Then try to play the DVD.
  Well, I also read a few topics in the forum a similar car problems and it seems that you are driving can has a calibration problem. In this case, you should replace the disk. I think that it isn't a reason to be angry. Your device is under warranty and all replacements must be done for free.

• I have a HP G56 I can't read the DVD on it more!

  I tried the automatic update and the Microsoft Fix tool but it says it cannot detect a problem!

  Doesn't seem to be able to locate the CD ROM on my laptop, a message appears that device driver software was not successfully installed.
  Thank you in advance of the charges.

  Hi Don,.

  Thanks for choosing Microsoft Community to post your question.

  It seems that you are unable to read the DVD. I'll be happy to help you. This problem may be caused because of DVD device drivers.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the model number of your laptop HP G56?

  3. what fix - it did you run?

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: Try to download and install the drivers for DVD at the following link.
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=321957&prodSeriesId=4247525

  Method 2: Try the following Microsoft Fix it

  Your CD drive or DVD cannot read or write media: http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  

  Method 3: Refer to the suggestions from this link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Pioneer DVR-KD08 issues on Windows 7

  Hi!, I'm asking here beucase is my last choice... I had Windows Vista Home Premium installed on my Sony Vaio VGN-CR460F, which has the CD/DVD Pioneer DVR-KD08 ATA attached... but well, there is NOT a driver for the CD/DVD drive... that's why sony vaio using a driver Optiarc AD - 7260S... but the problem is the following:

  After installing my new Windows 7, the software did not recognize the driver Optiarc AD - 7260S, he places a 'Pioneer' Driver, but this driver does not work... and when I try to find any other driver, he says that he's already been materialized, so he won't find all...

  The first question is: where can I find a driver (driver Optiarc AD - 7260S) so I can install it MANUALLY (with no configuration... it doesn't let me install if is an installation program)

  Now... After looking for drivers, I went to Sony ESupport Page... and I have downloaded the updated driver Optiarc... but when I try the update... it wont let me, because windows 7 recognized the Pioneer drive (it was like optiarc in vista back then) since windows 7 recognizes the Pioneer drive... Optiarc UPDATE or even used Driver SETUP I would install it... (It is said: instalation error, there is no Compatible drive...)

  So mi second question is: How can I update my drive with the update installation program? ... Given that windows 7 recognizes the drive as pioneer... it says it is not compatible with the installer! ...

  I ask this because after upgrade my Windows Vista to Windows 7, the player collapsed to be able to read or write any DVD or CD, I tried to make it work with Mr Fix It Windows... and deleting the LowerFilters and UpperFilters registry... Then please don't answer that...

  I just need one manually to install my driver to make it work.

  Thanks :)

  Hi RoZuRiGo,

  1. What is software that does not recognize the drive?

  You can first try uninstalling the software Pioneer.

  Step 1:

  Uninstall the drivers Pioneer

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the game sound and video controller in Device Manager

  c. right click on the audio device and click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  Step 2:

  You can check the following link and try to install the firmware in Vista compatibility mode and check.

  http://www.Sony-Optiarc.EU/SupportService/downloads/fwdownloadpages/ADseries/ad7260sfwfile.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  According to this table of compatibility: http://esupport.sony.com/perl/support-info.pl?&info_id=11 DCR-HC30 may use the following maps:

  Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB

  Mark 2 Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB.

  You can read the table to make sure I was reading it correctly.

• How can I uncheck "read only" in the download folder in a way that it will remain disabled

  How can I uncheck "read only" in the download folder in a way that it will remain disabled

  If done through properties does not stick, have you tried running the command attrib-r at the command prompt?

  Click Start, click run, type cmdand press ENTER.
  To view the syntax for the Attrib command, type attrib /? at the command prompt.

  Check MS article for more details.
  You cannot view or change the read-only or system attributes:
  http://support.Microsoft.com/?ID=326549

  I guess that you are authorized to make changes on this file, if it does not play here.
  How to set, view, change, or remove special permissions for files and folders in Windows XP
  http://support.Microsoft.com/kb/308419

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">