Burning DVD disc does not not - D:------. Is not Accessible and error Code 2130932483

Similar Questions

• CD/DVD drive does not work. Error code: 39

  Original title: CD/DVD, HELP! Help! Help!  PLEASE, I BEG YOU!

  My CD/DVD drive is not reading any CD that is placed in it.  It allows you to work just fine now nothing at all, it's not same playiing or read the installation CD "s provided with the system and they are all scans CD that came with the computer when I bought it."  I am even unable to reinstall the drivers or anything else that I've seen a code # 39, I have no idea what it means.  I have never added any hardware, I installed my old program of words on this computer which is my original windows xp, but when I installed it it never gave me any problems.

  I NEED HELP, HELP AND HELPS TO SOLVE THIS PROBLEM, IT'S THE SECOND TIME I CAME TO YOUR SITE, AND I HAVE NOT RECEIVED ANY ASSISTANCE, I'M TRYING A SECOND TIME!  Help! Help! Help! PLEASE!

  Hello

  What happens when you try to reinstall the drivers? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Perform the System Restore to the date where the CD/DVD drive was working fine.

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Burn to disc does not

  I can't burn CD/DVDs.  It does not burn it to disc.  Problem running on both computers!

  Test you all items just to check
  the burner work?

  That's why I suggested CDBurnerXP... If it fails also
  You may have a hardware problem with your burner.

  It would be unusual for two burners to fail in the
  at the same time but not impossible.

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Satellite L30 VISTA - DVD player does not empty and clean recorded DVD

  DVD - RW 4 x discs ignored. When I try to 'burn' of ULead DVD Movie Factory or play a previously "burned" DVD made on my old model Qosmio, the DVD tray opens (with the disk in it) and with the message "Please insert disc". If the tray closes with the same disc always in it, it does exactly the same thing again.

  Product Commercilly DVD is most recognized and played. This problem exists since the laptop was purchased. Would appreciate any help.

  If this problem existed on the first day, why did you wait so long and not tried to resolve as soon as possible?

  I recommend you to install the Nero trial version and check the functionality of engraving. Try please to create CDs or DVDs burning data or maybe some movies on DVD. Test these media. If you report about the same so I can believe that there is a serious problem.

  One last thing. Try to start with recovery media. Please let me know if the recovery procedure starts correctly.

• My CD/DVD drive does not read and is therefore no longer is visible on my computer, the BIOS or Device Manager.

  I just realized when inserting a CD, he has not read. I havn't he used in awhile, so it can't just happen. When I insert the CD you can hear it spin and green light flashes, but after about 10-15 seconds it stops and the light goes out. Under 'My Computer', I see more player. I don't see the driver CD/DVD option in my Device Manager menu longer, and I do not see it in the BIOS. I have a HP Pavilion Labtop.

  Any ideas? Thank you!!

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Since it is not recognized in the BIOS, which means that the reader could have failed, there is a possible cable or
  problem of controller or other hardware problems.

  ===================================

  If you can get it to be recognized in the BIOS and it still doesn't work, maybe these will help.

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
  DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps. Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L650 - DVD player does not work and not visible in my computer

  Hello

  recently, I noticed that my dvd on my toshiba drive does not work.
  This isn't even apper in the 'My Computer' folder.
  And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

  http://img267.imageshack.us/img267/8458/31854306.jpg

  He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

  Hello

  You need to remove the upper and lower registry filters.
  But before doing so, please remove the CD/DVD drive in Device Manager.

  Then start the registry (regedit) and then remove the filters above and below this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop

  I think this should help you

  Good luck

• CD / DVD DRIVE DOES NOT START? SAYS CODE 10

  I tired to uninstall the driver, and then restart the computer. It still does not work. When I go into the Device Manager, it says device will not start up, code.10. Is it possible to fix it? When I put a cd in, it sounds as if it will start, but doesn't.

  Try this.

  Remove the filters, uninstall the driver and then restart the computer and wait a few minutes and try again.

  No disc will eb read until this yellow device driver is first set.

  This method works on xp and vista. Try the link below.

  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

• Dell Wireless 370 Bluetooth wireless internal mini map does not, download the error code 43.

  Original title; - minimap wireless Bluetooth does not

  All of a sudden my internal Dell Wireless 370 bluetooth minimap has stop working and displays an error: Windows has stopped this device because it has reported problems. (Code 43). Could someone help me please

  Hello

  1. did you of recent changes to the system before the show?

  Method 1:

  Follow the link below and run the fix - it tool and check if it helps.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the link below and download the drivers for the Bluetooth device and install and check if that helps.

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?c=us&l=en&s=DHS&CS=19&DriverID=R226750

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Windows does not update 80072F8F - error Code:

  Get this error message after you install a new graphics card. The old one-stop working. My PC has been down for almost 2 months because of this, so updates are now critical.

  Windows used manually or automatically update, my time/date/year are broadly and cannot update either. When I try to update time, I get this message "an error has occurred so that windows was synchronizing with time.windows.com". I have other choices from other time synchronization servers, but none of them does not work either.

  I run Vista Home Premium 64-bit

  I have a problem connecting to some Web sites. Windows tells me "There was a problem with this Web site security certificate." I had this connection to hotmail message just to report this error. I get this connecting to Yahoo and many other sites. But I you the chance to replace and enter the Web site, against the better judgment of Windows.

  I have googled this error code and have tried a few ideas to fix, but nothing seems to work.

  Go to start / Control Panel / Date and time and click on change date and time.  Use the calendar to update the date and boxes to adjust the time.  Adjust the first date - then the time.  If necessary, clear syncronizatiion temporarily while solve you the problem, and then turn it back on once it is very close again.

  That alone might be causing all the other problems, so let's see what happens once it has been repaired.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Defender of victory does not work and error 800705 b 4

  Hello when I'm trying to run my Defender to win 7 he waits sometimes and it gives me error 800705 b 4 and the defender of victory still does not tell me how to deal with this problem and for more information I also have a problem with win 7 updates.

  Install free Microsoft Security Essentials or Avast free for a FREE anti-virus.

  Do NOT install both.

  Download MSE: http://www.microsoft.com/en-us/download/details.aspx?id=5201

• Windows Defender does not illuminate. Error code: 0x800705b4

  I did a search for the above-no error code came not upward with anything.  My computer is doing a complete analysis of Microsoft Security Essentials, yet Windows Defender does not illuminate.  This is for Windows 7-64 bit.

  Frank C.

  Hi Frank - Welcome to Microsoft Answers community.

  Check the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/f2ad10c9-203A-40E8-8d96-b4e88394387d
  http://social.technet.Microsoft.com/forums/en/winservergen/thread/2d5360db-BC6D-4B55-8983-54aa1c7486db
  http://social.technet.Microsoft.com/forums/en/winservergen/thread/108f7171-5a91-41d7-96c7-488d6311fe98
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/b4d088ba-33C1-4177-90d7-f57ecd395763
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/355d53fd-7ac6-4B6E-926f-9473e23279cd

  I hope this helps...

  Best regards
  Nathalie Itknowledge24.com