Screen LCD 20-inch HP Lp2065

Similar Questions

• I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  Hello

  He got this 1 day, or has it just begun?

  If it was always this way, it could be a manufacturing defect or your advanced display settings may be incorrect. The latter can be determined according to the settings/Advanced/display/personalization in the control panel settings. See Customization here, it varies depending on the manufacturer, but you focus on controls that adjust color output.

  If it has started, then it is possible the monitor had a malfunction. I put another monitor (if available) on the system. If the problem persists, then the fault is in the video card or display drivers. If it disappears, then the monitor can go wrong (you can try to adjust the settings on the screen itself to see if it has no effect). If it turns out to be the graphics card, I would like to firstly download and install a new set of drivers for the graphics card or the manufacturer of the system (the best for download, then uninstall the current set restart and install the new download).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Satellite 5205-S505 - support wide screen LCD TV?

  I have a new wide screen LCD TV with a VGA port, I connected this with my old Satellite 5205-s505 via the VGA port as the second screen. But it displays 'unsupport signal' on the TV screen.

  Can someone have the answer.
  Thanks anyway.

  Hey,.

  I think that it s according to the external display what resolutions it supports.
  Normally, your computer user manual laptop, you will find a list of the supported screen resolutions and you should check this!

  I also recommend to install the last page of Toshiba display driver.

• dust behind the screen LCD - common problem?

  Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
  facing a problem with the LCD screen.
  There seems to be a defect or the dirt behind the glass
  because it blocks the light of a pixel. Any attempt of
  apply moderate pressure to move this filth that has failed. I was
  I was wondering if it is common with screens LCD expect a sort
  I can't believe that this has passed quality of imperfection
  control. Have I not justification for firing
  toshiba for fixing, it is barely 1 week old?
  I have read the warranty booklet and there is no mention of
  dead pixel return policy can you elaborate on what is
  and what is not covered by the warranty?

  see you soon,

  Richard.

  Hello

  In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.

• IQ816 double video screen LCD (multiplex) problem

  I have an iq816 in which the motherboard just died, then it wouldn't turn on, POST, nothing. The motherboard has been replaced and the system now starts at the bottom of windows very well with one exception: all that is shown on the display is multiplexed 6 times. The image to fill the entire screen fills to only 1/6 of the screen and is repeated 6 times. The machine has no video output, so I can't test an external monitor.
  
  Here's what I know so far:
  1. the symptom appears during the during the POST, not only in Windows and BIOS configuration screen, then it cannot be a driver problem.
  2. the system has a video card discrete MXM and two LVDS ports on the motherboard (LVDS2 for discreet video) and LVDS1 for the embedded video. I already tried to remove the discrete video card and connecting the LCD to LVDS1 (integrated video), but the problem persists, this isn't a video card problem.
  3. in the configuration of the BIOS, the machine claims to be an iq504, not an iq816. I know that the machines take the same motherboard (same HP reference at least), so I don't know whether to be alarmed by the present or not. I tried to Flash the latest BIOS for the iq816, but the listed model is always incorrect. Is there another firmware, I need to flash, or is it a distraction?
  4. There is a set of DIP switches on the motherboard that I have not found any documentation on, but they are labeled GPIO, so I doubt they will help. Yet, no idea this here?
  5. There is a block of jumpers 8-pin without a label. I think that the bit is used to reset CMOS and reset password, but would like to know what are the other pins.
  
  6. the causes I can think of:
  A. bad cable LVDS (other on command - update)
  B. bad screen LCD (game over)
  C. something to do with this strangeness of motherboard model
  
  Thanks for any help/insight!

  Hey joesuffceren,

  I'm sorry that you use in this show, but thank you for providing this useful information! I did some research on your motherboard.

  Here is a link showing the motherboard specifications - develop internal connectors

  GPIO is listed there as the DIP switch used in the factory to match the motherboard to the LCD so it might be your answer. I searched for any kind of documents I can find on which positions the rider must be on for the iq816 but have not yet find something. I wanted to get this information for you right where you want to go ahead and try changing this autour rider to see what works.

  I hope this information helps! Forward to your response

• How can I remove the base on a screen LCD S232HL?

  I am moving and you need to remove the base of a screen LCD S232HL can anyone help?

  I think you have to shoot, place the monitor on a flat surface with a cloth under the screen to prevent scratches and pull on the base.

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sony VAIO all-in-One PC 20 tap computer touch screen LCD SVJ20214CYB Windows 8.

  I want to buy the Sony VAIO Tap 20 all-in-One PC computer touch screen LCD SVJ20214CYB Windows 8. I'll be able to use a Wacom digitizer pen in Windows Journal and Office OneNote?

  Hi Treoc,

  Thanks for choosing Microsoft Community!

  Want to know if the Wacom digitizer pen works in the Windows Journal and Office OneNote, I suggest to contact Wacom Digitizer support.

  http://community.Wacom.com/

  I checked in the Center of Windows 8 compatibility for more information about this device, unfortunately it is not listed there. You can also check using this link.

  Also see this link for Windows 8 features:

  http://Windows.Microsoft.com/is-is/Windows-8/meet

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Windows 7 can be installed without screen lcd monitor r

  Windows 7 can be installed without screen lcd monitor r

  N ° you must enter information and you will need to see what happens...

• Bubble like spots on the screen LCD T410

  Just noticed this a few minutes ago on my T410 (2516-CTO), there are three major tasks and three small spots on the centre-left of my screen. I tried to wipe the screen with a clean Microfiber cloth and a gentle jet of glasses cleaner on the cloth. All the dust was released, but the tasks remain. They appear only when I inspect the screen with a flashlight on dead. These tasks similar to white reflecting film-y areas, like the surface of the screen LCD is peeled off with very thin air bubbles. They seem to resemble defects under the surface - is my LCD delamination or anything else bad past?

  Doesn't look like it, they think that his 'damage' I have to pay for. I've only had this T410 for a week.

  Good news! After a long out of stock, the technician on-site, finally, came and succeeded him. Less than 15 minutes so I was looking at.

• How to join the table in screens LCD

  Hello

  How can I join the tables in the screens LCD and show them in a datagrid?

  I run LCDS3 and tomcat.

  Any help is appricitated

  User (name, surname, address)

  Address (address, State, country, postal code)

  If you want to display data below in your data grid

  ---------------------------------------------------------------------------

  firstName.       lastName.  State

  ---------------------------------------------------------------------------

  user.firstName | user.lastName | User.Address.State

• I played with my xbox 360 on my LCD 32 inch tv for Christmas about 3 days ago, I went to turn it on everything, and it is has a blue screen I tried the same thing I think but no luck can help you pls.

  the xbox360 is going through the port at the back of the tv ypbpr and I tried to change from tv to hdtv on the back of the head of the xbox, but still won't help.

  Hello

  As you said that you have connected the Xbox 360 on your TV, I suggest you to ask your question in the Xbox forums, because they will be in a better position to help you.

  http://www.Xbox.com/en-us/community/

  For your information, I provide you this link.

  The screen of your TV or monitor is empty when you are connected to your Xbox 360 console

  http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=916158&lcid=1033&category=hardware

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen LCD HP w1907 and placement of external hard drive.

  I was wondering if my new set-up is safe. I mounted my monitor on a wall bracket and I have a drive external hard iOmega 1 TB on a half inch behind it. Is this safe, or will I have to move the hard disk so as not to affect the performance of each device? I don't want something bad happens or, but especially not the hard drive. I'm including two pictures so you can see what I mean. You'll excuse the mess, because I just finished the installation, a few minutes ago. A picture is a front view, to show what looks like the establishment. The other is a side view, so you can see what kind of game I'm talking about. The hard drive and monitor do not touch each other, but it's less than an inch between the two, and like I said before, I don't want to take any chances on ruining the monitor or the hard drive. Thanks in advance for any input you can give me.

  Thanks for a quick reply Aussie. The pictures she showed not too well, but there is a gap of 1 inch between the top of the screen and the bottom of the shelf I rode slot, maybe a little more. I made sure to leave enough space for the power button as well as I wanted it to have the appearance to be suspended in the air, more or less. I'm not really worried about the heat out of the hard drive, because this is only on the top, which is closer to the screen, BUT, I have a small bedside fan that I mounted in the thread hole to extract hot air out, and it works fine. The upper part of the hard drive gets that warm now, rather than being about to burn a helping hand when I had put it on the desktop, on the side walk.

  My main concern had to do with magnetic things, which apparently does not apply to LCDs, because this configuration has worked very well since I had finished it. I think that only applies to CRT monitors, because everything I pulled hard in the last week and a half the disk worked fine!

  Thanks again for the quick response!

• Replace the screen LCD 1280 1440 or 1680 for SL400

  My SL400 LCD screen broke. Right now I want to try LCD resolusion change 1280 1440 or 1680.

  My SL400 is 2743-CTO. 14.1 inch LED backlit panel. What if you need parts?

  Hello gongu and welcome to the community.

  Please refer to the web city link below for part number details.

  http://support.Lenovo.com/en_IN/product-and-parts/detail.page?docid=PD005461

  Best regards

  Tanuj