Busy server on the scan status message

Similar Questions

• get the ' scan status unavailable.

  I hooked up a scanner to a usb port. Sound, but can not scan - it says under scanner status "unavailable". the driver is up to date and works very well. I can just scan?

  Hi Erikw12,

  • Tried to connect to another USB port to check if it works?
  • What is the brand and the model number of the scanner?

  However, you can access the Device Manager and check if there are errors for the scanner device and after return from the error.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  You can also try uninstalling the drivers and scanning software, programs and functionality and Device Manager. Later, download the latest drivers and install. Access the link below and follow the steps to uninstall the drivers and programs to monitor programs and features:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also contact the manufacturer support scanning to check if you need to install any other drivers or updates to get the scanner to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to replace the < root windows > file \system32\ntoskrnl.exe on a system running Windows Server 2003 for Small Business Server when the system does not boot without it?

  I use an old server.  I've been reading that you can fix the file for XP if you have the disc but Server 2003 a 5 disk, that you would use, or would you use even one of them?

  Hi BrianStoll,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope that helps!

• Copy the new Gmail message to a local folder in Thunderbird-, and mark it as read ONLY on the Gmail server

  Hi forum,

  for a long time, I tried to set up a filter which copies new messages in the Gmail inbox to a folder in local mail in Thunderbird, and defines in addition/unread state correctly on both ends.

  However, no matter what I try, it doesn't work.

  There seems to be no way to set the playback on the IMAP server to 'read' State after the copy action and at the same time keep the "unread" status for mails that have been copied to the local folder in Thunderbird.

  It does not work even if I created an intermediate folder on the IMAP server where mail is first moved to and only then is copied to the local Thunderbird folder later.

  I also tried all sorts of combinations with the 'move later' and other actions to FiltaQuilla.

  I'm really at a loss. I'm the only one who wants to copy the message from Gmail to a local Thunderbird folder and get the status of unread / read appropriate on the server, as well as in Thunderbird?

  Bunch help, thank you

  Bravo David.P

  Why is that every time I ask about any TB support forum, I find myself explaining things instead of getting an answer?

  I need to mail to stay on the server, even if I delete it locally. What part of this is not understandable?

  In any case, don't bother. I fixed it myself at the same time by putting in place the new Gmail account in Thunderbird.

  See also:
  http://forums.mozillazine.org/viewtopic.php?f=31 & t = 2877149

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• Unable to join 7 Pro to the Small Business SERVER 2003 domain

  So far, I was unable to join a new Pro 7 laptop running an existing Small Business SERVER 2003 domain. Whenever I try to use:

  http://servername/ConnectComputer  I get a 403 http error and that it points to an IIS issue, but I can't seem to find a way to work around this problem.

  Then I tried to go through the system properties and computer name change and join. Then, I get a message "cannot locate the area." I tried to use the FQDM, only the name of the server, the domain name under the extension, and nothing works. At first, I thought it was a DNS problem, but, I ping the name of the server or any other computer by name, with no problems...

  Don't know what I'm missing here, but if anyone can shed some light on the situation, it would be greatly appreciated.

  Thank you

  Mark,

  If you'd want to repost your question on the Forums Technet MS, one of SBS experts it would be better suited to provide you with a solution. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error reported: Thunderbird will try to download a message that says that there is no such thing as the mail server. 86 other pending messages

  For the last two days, I can't get the messages. The following error message appears: "the RETR command failed. Error when retrieving a message. "Mail server pop3.tiscali.co.uk responded: cannot open the file ' /nfs2/mailgb/mail_29/27/12/a.lockley%tiscali.co.uk/0A70004056E64E83.msg' errno 2, the file does not exist. He has apparently 86 messages to download and more are arriving regularly

  Looks like there may be a logjam caused by either the webmail junk folder or more old not yet downloaded email.

  Try this:
  Account sign-in webmail via a browser.
  Empty folder 'spam' to the server.
  In Thunderbird new attempt to get the Messages.

  If still a problem:
  Access webmail.
  Read email oldest, but not yet downloaded.
  Delete or move to another folder.
  In Thunderbird new attempt to get the Messages.

  Report on the results.

• message from Firefox: "page isn't redirecting properly" Firefox has detected that the server redirects the request for this address in a way that will never end. * Why this mess

  "The page isn't redirecting properly?

  i receive this warning on a daily basis. it seems to occur whenever i open a message  in gmail or try to send a message. anybody have a clue about this? thanks!
  

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     *   This problem can sometimes be caused by disabling or refusing to accept
           cookies.
  

  See http://kb.mozillazine.org/The_page_is_not_redirecting_properly

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Get a fixed image and audio while playing a movie in Windows Media Player, also get the message: "network is too busy to read the file to its original quality.

  Original title: Windows Media Player

  When I go to play a movie using windows MediaPlayer all I get is an imagwe again with audio and this message 'network is too busy to read the file to its original quality. Also, all my other media playing programs read the video but are rather "lag". I think the problem is that I already used a program to download torrents called 'BitTorent' and maybe this has used up all my bandwidth or processing speed? Not really sure but would really like it if I could still use WMP and I'm looking for resolution to my problem?

  Thank you

  Hi Jeremy,.

  It seems that you have problems with playback of video files in Windows Media Player.

  1. what operating system do you use?
  2. this happens with all the videos?

  If you use Windows 7, here are a few troubleshooting steps that you can try.

  Method 1: Try to run the troubleshooting Windows Media Player settings Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: If the problem persists, try to disable and enable Media Player and check.

  Step 1: turn off Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.
   
  Step 2: Enable the Windows Media Player:
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3: Try to re register the wmp.dll file and check if it helps.

  a. log on as an administrator.
  b. click Start, type cmd in the text box Search , right-click on cmd.exe, click run as administratorand then click continue.
  c. at the command prompt, type regsvr32 wmp.dll, and then click OK.

  I hope this helps!

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• downloaded the trial version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (1) downloaded the evaluation version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (2) in addition, I want to assure you that I understand how the server works.  Is it just software?  No box to connect the computers up to?

  Hello

  The question you have posted is related to Small Business Server 2011. Please post your question in the Forums of Windows Small Business Server. Consult the following link:
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver2011essentials/threads

  Hope this helps

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.