Button grayed out ordering?

Similar Questions

• Console Remote button grayed out for M605 blades seen CMC

  Hello

  When connected to the CMC and look at a preview/properties/server status, M605 blades show the Remote Console as grayed out button, but the button iDRAC is normal.

  At the start of the iDRAC a blade, the Console tab can be selected and the Console launched very well. So nothing wrong with the connection to the console.

  • How the key of Remote Console can be enabled from the CMC? Why is greyed out?

  (BTW, in a chassis mixed with M610 and M605, of the M610 all show the button Console remotely normally, but the M605 are greyed out)?

  Thx for your help,

  John Bradshaw

  John,

  The M605 is a blade of more early liberated. The M610 is actually cut, everything that follows the M610 will support the launch of the Console remotely from the CMC. The M600 and M605 does not support, but can be launched from the Drac.

• What could cause suddenly LR menu 5.7 and two button grayed out (Mac OSX) the import?

  Trying to help someone in this situation.  Use LR 5.7 and importer.  At some point, import capabilities are grayed out.  Could it be because that the displaced using the Finder instead of moving pictures in LR?  Is there a way to recover from this without losing the photos?

  If the items have been moved using the Finder, try right-clicking (Ctrl-click) on a folder name in the LR library. Choose the location of the update folder and then navigate to the new location. LR can then update the database links in the catalog.

• Why Export button grayed out in first 10 items?

  I'm trying to export (in a file on a disk in the end) an excerpt from a minute to 10 minute video in my calendar.  In earlier versions of PE I went simply to file > export and picked up one of several options (film, etc.).  The export option is grayed out in 10 EP (which I use on the Mac).

  No idea how I can activate it?

  Thank you.

  Just place the work area bar to cover the range you want to extract and select only WAB in the dialogues on part.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• FAQ (29): why the "See the last SoftPaqs" button grayed out?

  When I'm in the mode 'All products' or "Building Driver Pack", "Show the last SoftPaqs" button is gray. How to enable this feature for SDM will show me the latest versions of the SoftPaqs for my selected models?

  

  In the modes of 'Building Driver Pack' and 'All products', you have the ability to check more than one model. Unfortunately, showing the latest version of a SoftPaq for more than one model is problematic because the same version of a SoftPaq maybe not the one which is responsible for all the models selected that makes the application unnecessary and ambiguous.

  Just think about it for a second. If we had a model (let's call ModelA) 5 years ago and another model who is only 1 year old (let's call ModelB) selected in SDM. Keep in mind that computer models of different years will probably have material differences that require different hardware drivers. Also note that this could be the case even if the models were of the same year. Furthermore, models most recent software qualification only goes back a number of years. It could very well be that the software can run on older models, but if HP do not qualify and test it, HP will not associate the new version of the SoftPaqs with older models.

  So, what does the request: "Show me the latest versions of SoftPaq for some models ModelA and ModelB" really means? We asked this exact question to various people and two completely DIFFERENT responses are returned. The answer seems to be influenced by the different needs of the Organization to which the respondents belonged to.

  For some, the answer was: ' show me the most recent SoftPaq who qualified for BOTH models. This is known as a query "AND". This query would only show what are the common SoftPaqs between ModelA and ModelB, but would show NO SoftPaqs, who were qualified for only one and not the other.  With this query, most of models that are selected, the lower number of SoftPaqs appears.

  But for other respondents, the answer was ' show me the lastest Softpaq is qualififed for EITHER model; which is a query "GOLD". This query would show all the SoftPaqs associated with each model. But it is not clear if each SoftPaq was qualified for ModelA, ModelB or for both. This request seems to be too broad, because the models have been selected, more likely it is that a SoftPaq would appear even if she wasn't qualified for a model on the list only.

  So, to illustrate this, imagine the following scenarios...

  Scenario 1

  We have three SoftPaqs. SoftPaq1 qualified for the ModelA and ModelB, SoftPaq2 is ONLY responsible for ModelA and SoftPaq3 is ONLY responsible for ModelB. What SoftPaqs should appear as the "last SoftPaq ModelA and ModelB"?

  Answer:

  Query AND: SoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 2

  What happens if the SoftPaq3 did not exist?

  Answer:

  Query ANDoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  OR queryoftPaq1 and SoftPaq2 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 3

  What happens if the SoftPaq1 did not exist?

  Answer:

  AND query: No. SoftPaq is qualified for BOTH models

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Add more models and SoftPaqs and results gets confusing real fast. Therefore, to avoid confusion, it was decided that the "View the last SoftPaqs" button would be disabled if more than one model was chosen because it is the only case where "See the last SoftPaqs" is not ambiguous. Thus, the "View the last SoftPaqs" button is available, if only a model (and OS and language) are selected.

  If you have several patterns that you manage, and you want to use the button "See the last SoftPaqs", please enjoy SDM configurations and save a configuration for each model. For more information on SDM configurations, please see using SDM.

• Scan button grayed out in fashion "show details".

  Photosmart 2710 all-in-one

  Mac OS x Lion

  Following the instructions in your video I have sucessfully open the scan window.

  In the detail view, there are three buttons on the right side at the bottom:

  Hide details, preview, Scan

  The button is grayed.

  Preview works as expected.

  If I changed my view simplified by clicking on "Hide details" the scan button works as expected. If I switch back to the detailed view it is gray again.

  Why the scan button is gray not in the detail view?

  After you click Preview to launch an analysis of the preview, make sure the scanning area is correct (there should be a box made of a dotted line around the scanning area.  If she is not there, drag with your mouse.

  Set the scan type, the format, and destination, and then click Scan.

• "Shrink button" graying-out seems to be on a timer

  Us have long been a problem on multiple computers XP when the button 'window shrink' (the one to the right of the "Minimize" button) will gray then (1) the application crashes, and (2) two copies of the program show in Applications like the running task manager - and cannot be completed.

  I am a tech at low altitude, and I cleaned computer "Sims2" of my wife.  This box has very rarely an ethernet cable is plugged in, and I cleaned up and stops each auto-set software up to date I could find too.  This greatly reduces the number of its accidents of Sims2 unexpected (no other machine that I use has Sims2 on it), but now if she leaves his machine on for a while then it will suddenly minimize, two copies of the game will be displayed in the Task Manager and then a very soft 'tick-tick-ticking' sound comes through the speakers.

  If I have several windows open on our Internet machine, I can sometimes see a window after another have his button 'Shrink window' go grey and freeze to turn (one at a time).

  I've seen it work on machines other than ours, but much more rarely.  (I'm loosely associated in a repair shop.  I have about 2000 hours of experience there and to a charity who renovate PCs.)

  I use Microsoft Security Essentials and Malware Bytes.  All updates are underway.

  I guess it is a virus, because I do not have a software problem.

  Hello

  You can view these methods:

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  Configure the computer to start start clean and then 50-50 approach use to check, with which application, these files are associated with. Once you find the application I would ask you to uninstall and reinstall.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Save and Cancel buttons grayed out, shouldn't be...

  CS5

  Windows XP

  My save and Cancel buttons are gray, even if there is a lot of undo and unsaved files.  I have to go to file-> save to save the file and forget-> cancel editing, it only goes so far.

  Sugeestions?

  Kim

  The element menu to cancel should take you as far as the button cancel. Also try display the historic range (menu: window > history) and see how far back which will take you (and you won't have to do an undo both).

  Generally, if something like that happens (or a keyboard shortcut does not work) my first recommendation is to stop and restart Dreamweaver.

  If this does not work, I'll try revuilding preferences.

• Disable the button (gray Out) browse file

  For all the gurus of the Apex.
  I am faced with a situation when I have an item in the list select - P2_DOCS_CATEGORY (with smart display Null) and an element to browse file - P2_FILE_INPUT and I don't want for the end user to be able to click on browse file (but I want it to be visible, so disabled state or gray outside would be perfect) before selecting anything in my select list (all except the non-null state where my Null value is - select) the Type-).
  I tried this script in the HTML header but apperantly he does not work for me:
  

  function FldEnableDisable (pThis)
  {
  If (pThis is 50)
  {
  $x('P2_FILE_INPUT').disabled = true ;}
  on the other
  {$x('P2_FILE_INPUT').disabled = false ;}
  }

  and

  onChange = "javascript:FldEnableDisable (this.value)"

  in the attributes of the Form HTML element ""
  
  Any ideas?
  Thank you

  Hello

  My sample
  http://Apex.Oracle.com/pls/OTN/f?p=40323:6

  I have this on HTML page header

  In the HTML Body Page attribute

  onload="$x('P6_TEST').disabled=true;"
  

  Then to the point element Test Lov HTML Form attributes

  onchange="FldEnableDisable(this.value);"
  

  At least it works for me in Firefox 3.5

  BR, Jari

• Video button grayed out and call quality info says that there are too many people in the Group call

  I recently downloaded the latest version of Skype and all of a sudden I can't make video calls to group because there is too much can people in the group, but when im chat only to one person still does not work. He said I can video call a maximum of 10 people, when I have 7 people on the group...

  any help on this?

  

  It is a known problem with the latest version of Skype 7.0.

  http://community.Skype.com/T5/Windows-desktop-client/why-can-t-you-turn-on-video-chat-anymore-in-big...

  Uninstall version 7.0 and install the 6.21.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• The unit button grayed out after upgrade to 4.1.4

  I have Fusion 4.1.4 running on a MacBook Air 11 '', 2012 model.

  After upgrading to 4.1.4 I can't select unit mode more.

  

  Any help would be greatly appreciated.

  Thank you

  Franz

  Reinstall the VMware tools in the guest OS.

  For more information, see this article

• PSC 1350 printer all-in-one: the "scan" button is grayed out.

  I'm looking for just a simple answer to this.

  My 1350 all-in-one (an old model by the way) has all of a sudden the "scan" button grayed out

  He shows me the overview of the analysis, but it does not scan.

  I used this computer and the printer together for many years.

  This isn't a device, just a regular connection.

  Frustrating.

  Hello

  Or select an area on the preview of the scan with the mouse or uncheck the custom size option and choose the required scan size, then you will be provided with the opportunity to complete the scan.

  Kind regards

  Shlomi

• Cannot export the PDF file into WORD Doc (that I just bought) system allows me to choose which PDF file but is grayed out in the area where is located the "Convert" button - so no activity.  I want to be sure that my order was confirmed the e-mail address

  RE: ORDER NUMBER: ADO18068065

  I just bought your program Adobe Export PDF but does not - Adobe allows me to capture what PDF I want to export - but won't let me DO NOT convert the file (the window to see where the PDF export is grayed out and I can't enter anything).  Can I entered an incorrect email when I signed firstly for the export of Adobe program ([email protected] INSTEAD of Correct e-mail address: [email protected] could you go to see if the order went through because your window opens each time I try to export a PDF file to WORD asking me to buy the program Adobe export again. )

  Thanks - Pls email me at: [email protected] with your answer.  

  Hi constancew92438621,

  Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the service to export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC.

  You can also use this service online at https://cloud.acrobat.com/exportpdf

  Let me know if you have still any problem?

  Kind regards

  Nicos

• Why active in my download Pause option is grayed out? Nothing happens when I click on the Pause button. ESP downloading youtube videos.

  I have videodownloadhelper installed module. Videos uploaded using it cannot be suspended. In addition, my firefox itself finally interrupted downloads between the two so I have to right click on the download file and select Pause then right-click again and select summary to go ahead with the download. But now the video download is paused and with right click it break option is grayed out is simply not available. How can I sort this strange problem?

  This is for all people with this annoying problem

  I followed the steps to the top and it worked, so ive disabled and uninstalled all the addons and themes, Ive restarted and began to install 1 by 1 thi is what ive installed:

  Add Blocker
  DownloadHelper
  Trust WOT
  DownThemAll
  Monkeyscript

  and they don't take my pause button and now it works fine, but when I installed:

  Youtubecenter

  problem, I love this addon anyway, so ive tried again in other order and the same thing happened to me but this time with script of monkey, so don't point to any specific addon, is just a weird problem, that of boring, but it can be solved in 20 minutes

  Cheers.

• Why the Build button is grayed out?

  CS 5.5 MC, S & T ed. Yet 5.1. Win7Pro64.

  My first attempt using again. Try to burn a project Premiere Pro 30 minutes of a / v clips and photos on a DVD SD without creating a directory. Want just the movie DVD + RW burned to play instantly.
  Follow the instructions in step 6 that is to click Build, but it is grayed out. I registered this sequel in 2012. What I don't understand?
  It might have something to do with settings in the properties panel? I'm not sure they should be, because they are not addressed in 5 steps. In any case, I clicked project check and got 2 errors, so I put the first Stop, play the same as the title button. Chronology of the hand is not defined. Operations: No permit. Had no error when I clicked on project to check again.
  Also, as suggested in another post, I tried to change out of build Panel to record DVD and Image, but generate button is still gray.
  I accepted all settings by default when the release was made on a DVD disc.

  The panels menus and timelines are empty. Not transcoded first Pro Sequence.prproj 1920 x 1080, 59,94 frames per second is on the project Panel. The miniature film plays normally on the project Panel. Flowchart panel shows a DVD icon.

  In addition, in the project settings dialog box, the name: Unitilted.ncor is grayed out. I don't know how to change this name.

  Thank you

  What are the instructions you follow?

  If your editing panel is empty, you have no chronology of l. And some of what you set (for example 'first reading' 'Stop') is incorrect. When you want a DVD with no menu and play the video at the start, you set the first play on your Timeline.

  Once you create the project again, you can no longer change its name. You can do a save as and change it.

  In the project Panel, select the order of Professor go in the menu timeline, and then create the timeline. Set the action to the end of the new timeline 'Stop' if that's what you want, or to himself if you want to keep repeating.