Return from drafts of af: inputListOfValues the values of registers

Similar Questions

• Paths always down after returning from a SAN switch at the service

  I had a problem where electricity is cut to one of my SAN switches.  Everything continued to work because all the hosts and storage are connected to a second switch SAN.

  Now that powered the SAN switch back on all paths through the SAN switch are still displayed as out of service.  If I reboot a crowd she restores all of its path through two switches SAN so there is nothing wrong with the zoning on the switch.  I see that the ESXi host host bus adapters connected to the SAN switch, even without reboot, when I do a switchshow (using Brocade switches) and I see that the configuration is correct.

  I tried a new analysis of the HBA, and this removes the paths through the HBA that is connected to the switch that loses power!

  I tried to reset the HBA to get to do a reset of the LIP by publishing: -.

  esxcli fc san storage reset - a < hba >

  for example

  esxcli fc san storage reset - a vmhba1

  and tried to change the State of the railways in assets with

  esxcli storage path together - State = active - path < path-runtimename >

  for example

  esxcli storage path together - State == active - path vmhba1:C0:T1:L1

  None of them have helped and I don't want to resort to restart the host, there must be a better way to bring these paths.

  I use ESXi 5.5 build 1474528.  Want to really upgrade to update 1 immediately.

  I have the advanced of that setting Misc.apdhandlingenable set to 1 and Misc.APDTimeout value 140.  The switch would have been off for more than 140 seconds.  I could try to set Misc.APDHandlingEnable to 0 and simulate the failure once again, but I'm not sure I want to do this because I remember issues with ESX(I) 4.x hosts becoming disconnected from vCenter following situations of CCA.

  Any suggestions?

  I followed it down to the driver used by the Fibre Channel adapter.  I had to update 10.0.100.1 - vmw.550.0.0.1331820 10.0.725.203 - 1OEM.550.0.0.1331820.

  The hosts have been using Adapters Emulex LPe16000 (IBM rebadged in an IBM Flex System).  See 5.5 ESXi hosts don't restore not path storage from the SAN switch failure. Computer services Pelicano so all the details.

• Default configuration of the windows features, returning from changes

  Failure configuring windows features, returning from changes

  What is the cause?

  Sorry, can't say. You must post a lot more detail.

• Cannot access the value of parameter task flow when type java.lang.string

  Hi all

  I use Jdev 11.1.1.6.0 version.

  Here's the scenario. I enclose the workspace.

  A taskflow (testScope1TF) simply have 2 obligatory parameters corresponding type is String and ArrayList.

  This stubborn taskflow placed as a region in a pop up (p1) in a fragment (testScope2Fragment.jsff).

  Have a command to link to testScope2Fragment.jsff and from there, I'll put the value of the parameter.

  Pop until I can access the value of the ArrayList, but for string, it is show null. However all these setting set the same bean. What is the reason for the string parameter showing null?

  Can anyone help to understand this strange behavior.

  Here is the link to sample workspace

  https://drive.Google.com/file/d/0b-8Suq_hutEhNE01blZFUnlQdzQ/view?USP=sharing

  To run the example - ScopeTestPage.jspx run-> click on commandLink 1 -> press the commandButton control pop up 1.

  In output integrated wls console like below.

  ------------------------------------------------------------------------

  Table list size: 2

  String value parameter: null

  Here's the code-testScope2Fragment.jsff.

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1" "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "" "

            xmlns:f=" http://Java.Sun.com/JSF/core ">

  < af:panelStretchLayout id = "PSL1" >

  < f: facet name = "center" >

  < af:panelGroupLayout layout = "scroll".

                             xmlns:af=" http://xmlns.Oracle.com/ADF/faces/rich "" "

  ID = "pgl1" >

  < af:commandLink text = ' commandLink 1 ' id = 'cl1' partialSubmit = 'true '.

  actionListener="#{viewScope.TestScope2Bean.tesctScope2Method}"/ >

  < af:popup id = binding = "#{"p1"viewScope.TestScope2Bean.viewScopePopUp}" >

  < af:dialog id = "d1".

  title = "Pop of the scope on the view upwards the Value: #{viewScope.TestScope2Bean.testScopeView String}" >

  < af:region value = "#{bindings.testScope1TF1.regionModel}" id = "r1" / > "

  < / af:dialog >

  < / af:popup >

  < / af:panelGroupLayout >

  <!-id = "af_one_column_stretched"->

  < / f: facet >

  < / af:panelStretchLayout >

  < / jsp:root >

  public class TestScope2Bean {}

  String testScopeView = null;

  ArrayList < String > testScopeViewList = new ArrayList < String > ();

  Private RichPopup viewScopePopUp;

  public TestScope2Bean() {}

  Super();

  }

  public void tesctScope2Method (ActionEvent actionEvent) {}

  Add the code in the event here...

  this.setTestScopeView (In ViewScope Test");

  testScopeViewList.add ("sjdjshdsj");

  testScopeViewList.add ("cdsfdsfsf");

  RichPopup.PopupHints applyHoldspopUpHints = new RichPopup.PopupHints ();

  this.getViewScopePopUp () .show (applyHoldspopUpHints);

  }

  {} public void setTestScopeView (String testScopeView)

  this.testScopeView = testScopeView;

  }

  public String getTestScopeView() {}

  Return testScopeView;

  }

  {} public void setViewScopePopUp (RichPopup viewScopePopUp)

  this.viewScopePopUp = viewScopePopUp;

  }

  public RichPopup getViewScopePopUp() {}

  Return viewScopePopUp;

  }

  {} public void setTestScopeViewList (ArrayList < String > testScopeViewList)

  this.testScopeViewList = testScopeViewList;

  }

  public ArrayList < String > getTestScopeViewList() {}

  Return testScopeViewList;

  }

  }

  Thanks in advance.

  I took as look at your code. The problem is that you use a popup in the region and regions have a bit different (refer to http://www.oracle.com/technetwork/developer-tools/adf/learnmore/67-queryform-in-popup-253861.pdf) in the regions. Must be addressed the refreshment of the ifNeeded region to make your sample (see image below):

  

  Timo

• Get the line item id and the value dinamilly with AJAX in tabular form

  Hello
  
  I have a table with a Popup Lov presentation, when I select something in the Popup of some elements (in the form of table) must be filled with the value returned from a query that uses the ID of Popup Lov (return value) as a parameter.
  
  How can I get this value and use only for this line?
  
  Thank you
  Alan

  Hello

  OK - that message sounds ok to me. You would like to check the javascript code after this line to see what he does - some alert() messages can help.

  To add a blank line to a tabular presentation, you can try:

  SELECT NULL Field1name,
  NULL Fieldsname
  FROM DUAL
  UNION ALL
  SELECT Field1name,
  Field2name
  FROM Tablename
  

  or, if you use 4 Apex, you can add a few::AddRow(); in the parameter "execute when Page Loads ' the page attributes

  Andy

  Published by: ATD February 8, 2011 17:57

• Retrieve the value of the sequence

  Hello
  
  I'm fairly new to Apex and I have a question about it.
  
  I have a form that users can fill data and send it in a table.
  The PK is taken from a sequence and submit the value retrieved is put in the table.
  
  So far so good.
  
  Now what I want to do is that, on Submit, still recoverable it value of the sequence also be put in another table.
  I did a process with the following source:
  
  insert into kl_hw (hardware_id_fk, klantnr_fk) VALUES (: P4_HARDWARE_ID, 1);
  
  But the: P4_HARDWARE_ID has no value yet.
  What can I do to get the value of sequence early or what is the correct way to do this?
  
  Any help would be appreciated.
  
  Wim

  When you run 1 process, it's like a row of process of

  ? In this process define you a page hidden item using the method previously posted and then use this element when you provide elements to the other table...

  Thank you

  Tony Miller
  Webster, TX

  What happens if you were really stalking a paranoid schizophrenic... They would know?

  If you answer this question, please mark the thread as closed and give points where won...

• Update the value of DataGrid

  I have a request - it can be found at http://reactorsoft.ath.CX/projects/Cygnus_v1/Cygnus_v1.html If a reference is required.

  In this application, I have a DataGrid. What I want to do update the rightmost 3 columns based on the data entered in the Act. Column of gains. Ideally, this will be row-by-row.

  The problem I encounter is that the value in the DataGrid control is not updated quickly enough when the itemEditEnd event is raised. If I return to this line and update the value is entered, the old value will be recovered. How can I work around this problem?

  In addition, another problem I encounter is that the triggerEvent itemEndEdit event value is not give me a value. This is supposed to tell me if the installation has ended due to a mouse event or keyboard. It is also essential to what I'm trying to accomplish.

  Can anyone provide me with an isight in this? It will be very much appreciated.

  A tip: use the method callLater to ensure that the dataProvider has been updated:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"creationComplete =" init () ">"
     
          Import mx.events.DataGridEvent;
  Import mx.collections.ArrayCollection;
             
  [Bindable]
  private var dp:ArrayCollection;
             
  private function init (): void
  {
  var da: Array = [{id: 1, amt: 0, c1:0, c2:0}, {id: amt 2: 0, c1:0, c2:0}];
  DP = new ArrayCollection (da);
  }
             
  private void calc(evt:DataGridEvent):void
  {
  var currObject:Object = [evt.rowIndex] dp;
  currObject.c1 = currObject.amt * 2;
  currObject.c2 = currObject.amt * 1.5;
  }
  ]]>
     
     
         
             
             
             
             
         
     
     
  

  Hope this helps,

  Dany

• The VI call does not show correct Boolean value returned from Subvi

  I have a Subvi, which returns a Boolean to indicate whether the system is WoW64 or not. When I run this by herself or with a probe VI, I get a TRUE result (my OS is 64-bit Win8, and I am running 32-bit LV2015).  When the VI is called as a Subvi, and the output is wired to a Boolean value on the front of the caller, the value is FALSE, even if it is TRUE inside the Subvi.  The LV2014 code is attached below.  It happens in 2014 but not 2013.  Is there something to do with DLL calls made by the Subvi which is corrupting the Subvi call?

  
  

• AF:inputListOfValues sets the value of the first item in the result set when using enter key or tab and component value autosubmit = true

  I use JDev 11.1.1.6 and when I type in a value in an af:inputListOfValues element and press enter or the tab key, it will replace the value I entered with the first element in the set of results LOV. If enter a value, simply click on the component af:inputListOfValues it works correctly. If I use the popup and find a value it works properly as well. I have a programmatic view object that contains a single transitional attribute (this is the view object that is used to create the list of the components of the value of) and then I have another object from view based on entities which defines one of its attributes in a list of the attribute value. I tried to use a base object view of entity to create the LOV to and everything works as expected, so I don't know if this is a bug when using programmatic view objects or if I need more code in the VOImpl. In addition, it seems after that first of the value being replaced by the first value in the result set that it will work correctly as well. Here are some excerpts of important code.

  Also, it seems that this does not work only if the text entered in the component af:inputListOfValues would have only a single game, returned in the result set. For example, given the result defined in code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy

  If we get into Cha, the component works as expected

  If we register A, the component works as expected

  If we get Jimmy, the component does not work as expected, and returns the first value of results IE. Brad

  If we get Fred, the component does not work as expected, and returns the first value of results IE. Brad

  I also checked that I get the same behavior in JDev 11.1.1.7

  UsersVOImpl (programmatic view with 1 transitional attribute object)

  import java.sql.ResultSet;
  
  import java.util.ArrayList;
  import java.util.Iterator;
  import java.util.List;
  
  import oracle.adf.share.logging.ADFLogger;
  
  import oracle.jbo.JboException;
  import oracle.jbo.server.ViewObjectImpl;
  import oracle.jbo.server.ViewRowImpl;
  import oracle.jbo.server.ViewRowSetImpl;
  
  // ---------------------------------------------------------------------
  // ---    File generated by Oracle ADF Business Components Design Time.
  // ---    Wed Sep 18 15:59:44 CDT 2013
  // ---    Custom code may be added to this class.
  // ---    Warning: Do not modify method signatures of generated methods.
  // ---------------------------------------------------------------------
  
  public class UsersVOImpl extends ViewObjectImpl {
  
      private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
      private long hitCount = 0;
  
      /**
       * This is the default constructor (do not remove).
       */
      public UsersVOImpl () {
      }
  
      /**
       * executeQueryForCollection - overridden for custom java data source support.
       */
      protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
  
           List<String> usersList = new ArrayList<String>();
           usersList.add("Brad");
           usersList.add("Adam");
           usersList.add("Aaron");
           usersList.add("Fred");
           usersList.add("Charles");
           usersList.add("Charlie");
           usersList.add("Jimmy");
  
           Iterator usersIterator = usersList.iterator();
           setUserDataForCollection(qc, usersIterator);
           hitCount = usersList.size();
           super.executeQueryForCollection(qc, params, noUserParams);
  
      } // end executeQueryForCollection
  
      /**
       * hasNextForCollection - overridden for custom java data source support.
       */
      protected boolean hasNextForCollection (Object qc) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           if (usersListIterator.hasNext()) {
       
               return true;
  
           } else {
  
               setFetchCompleteForCollection(qc, true);
               return false;
  
           } // end if
  
      } // end hasNextForCollection
  
      /**
       * createRowFromResultSet - overridden for custom java data source support.
       */
      protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           String user = (String)usersListIterator.next();
           ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
  
           try {
  
               populateAttributeForRow(viewRowImpl, 0, user.toString());
  
           } catch (Exception e) {
  
               LOGGER.severe("Error Initializing Data", e);
               throw new JboException(e);
  
           } // end try/catch
  
           return viewRowImpl;
  
      } // end createRowFromResultSet
  
      /**
       * getQueryHitCount - overridden for custom java data source support.
       */
      public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
           return hitCount;
      } // end getQueryHitCount
  
      @Override
      protected void create () {
  
           getViewDef().setQuery(null);
           getViewDef().setSelectClause(null);
           setQuery(null);
  
      } // end create
  
      @Override
      protected void releaseUserDataForCollection (Object qc, Object rs) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           usersListIterator = null;
           super.releaseUserDataForCollection(qc, rs);
  
      } // end releaseUserDataForCollection
  
  } // end class
  
  

  <af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                                label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                                columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                                searchDesc="#{bindings.UserName.hints.tooltip}"                                           
                                                simple="true">
                            <f:validator binding="#{bindings.UserName.validator}"/>                       
  </af:inputListOfValues>
  
  
  
  

  I found a solution to this problem. It seems that, when using a view object programmatic that has a transient as its primary key attribute, you need to override the methods in the ViewObjectImpl so that he knows how to locate the line related to the primary key when the view object records are not in the cache. That's why it would work properly sometimes, but not always. Here are the additional methods that you must override. The logic you use in the retrieveByKey would be on a view view object database object and would be different if you had a primary key consisting of multiple attributes.

  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
      return retrieveByKey(viewRowSetImpl, null, key, i, false);
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
  
      RowSetIterator usersRowSetIterator = this.createRowSet(null);
      Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
      usersRowSetIterator.closeRowSetIterator();
      return userRows;
  
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
      return retrieveByKey(viewRowSetImpl, null, key, i, b);
  }
  

• List of input values (multi-column) must return the output text once the value is selected

  Hello

  I am trying to achieve conditional:

  I create a searchVO(select '' empNumber from dual) - to accept the input value (name empNumber).

  I create empLovVO (select enum,ename, addr, city of emp). lov attached to empNumber (searchVO).

  In the list of values when I select a value (emp 1, a, xyz, abc), it must return the default aby associated with emp values 1 to my output texts

  the name of the EMP one.

  addr xyz

  City abc

  It should also automatically change the values if I select another empNumber.

  Please let me know how to achieve this.

  
  Thank you

  Firstly, for the searchVO, add a three other attributes, name, address, and City, the type of string:

  

  and make sure they are still editable:

  

  Then, you're mapped LOV enum attribute EmpNumber, right?

  Do similar for the newly created attributes, in the list of values dialog box validation:

  Ename--> name,

  --> addr addr,

  City--> City

  

  Then, just to show these attributes in the form of output text, and you'll get what you want...

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• Returning from universal theme item values - form Page (modal dialog box)-

  Hello

  I use the universal theme - modal dialog (the form page, page 7) and intend to return several values of the item to the page back 2 when the dialog box is closed.

  I'm back from the point values P7_DNAME & P7_DEPTNO of page 7 of the elements P2_DNAME & P2_DEPTNO on page 2 but does not work.

  Form Page - Page 7 (modal dialog box)

  Process - close dialogue

  Items to return - P7_DNAME, P7_DEPTNO (put several points of values here to go back to page 2)

  Report Page - Page 2 (that calls the page 7 of the modal dialog box)

  Here we have a dynamic Action. I use the event ""closed dialogue ' and 'Set value' action "

  Event (closed dialog box) -

  Action - set

  -Define (return goods of dialogue) - P7_DNAME, P7_DEPTNO Type

  -Selection Type (items) - P2_DNAME, P2_DEPTNO [here I am back to several items.]

  If I go back more than one Page values element, it doesn't any idea WHY?

  BUT if I'm back only a single value of point, there works perfectly well.

  Thank you

  Deepak

  You can return multiple items at once and their values are sent along, but you cannot set multiple items with different values by the action of a set value.

  You must create an action of the value set for each element you want to set the value with the value of the element to return.

• Returns the value of column line

  Greetings!  I currently have a request we will tell

  SELECT value, period FROM MAS_CFUS_KEYACM_CONTROLDATA ORDER BY cf_keyword_ID

  RESULTS

  Period value

  --------------------------

  100.0002 1 JANUARY 14

  -35.68 1 DECEMBER 14

  -1943.67 NOVEMBER 1, 14

  678.0013 OCTOBER 1, 14

  This continues for about 15 results by cf_keyword_ID.

  I'm looking to return the VALUE first in a new column called PREV1, the second value of PREV2, third in PREV3 and so on.  The same goes for the dates.  And all this for only the first 10 values of each cf_keyword_ID.  Can anyone suggest the best way to achieve this?

  Thank you!!

  Hello

  This is called pivoting.  Because I don't have a copy of your table test, I'll use scott.emp to illustrate.

  This shows the first 3 employees for each job, in order by hiredate, along with their hiredates:

  WITH relevant_data AS

  (

  SELECT ename, job, hiredate

  row_number () taken OVER (PARTITION OF work

  ORDER BY hiredate

  ) AS r_num

  FROM scott.emp

  )

  SELECT *.

  OF relevant_data

  PIVOT (MIN (ename) AS ename

  MIN (hiredate) AS hiredate

  FOR r_num (1, 2, 3)

  )

  ORDER BY job

  ;

  Output:

  WORK 1_ENAME 1_HIREDATE 2_ENAME 2_HIREDATE 3_ENAME 3_HIREDATE

  --------- ---------- ----------- ---------- ----------- ---------- -----------

  ANALYST FORD 3 December 1981 SCOTT April 19, 1987

  The CLERK SMITH December 17, 1980, 3 December 1981 JAMES MILLER January 23, 1982

  MANAGER JONES 2 April 1981 BLAKE 1 May 1981 CLARK June 9, 1981

  PRESIDENT KING November 17, 1981

  SELLER ALLEN 20 February 1981 WARD 22 February 1981 TURNER 08-Sep-1981

  There are actually more than 3 SECRETARIES and SALESMEN.  Which does not cause an error; the only first 3 are shown.

  As you can see, having less of 3 does not cause any errors, either.

  For more info on pivots, see the FAQ of the Forum:

  Re: 4. How can I convert rows to columns?

  I hope that answers your question.

  If this isn't the case, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

  Explain, using specific examples, how you get these results from these data.

  If yod post rather a problem using scott.emp, then you need not display the sample data; just results and explanations.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum:

  Re: 2. How can I ask a question in the forums?

• How to locate the values returned by the data adapter

  I have a need to internationalise/locate a string which our data adapter returns to the web client to fill out things like the table of inventory for our type of object.

  In other words, I would need to make the location in my Java code on the service side.

  But what I do not know how to do is how do I know what locale, the answer must be returned for.  I don't get the locale information in the query for the data.

  Looks like I found my answer: I can get information from the UserSession returned by the UserSessionService.

  One thing I discovered, is that the user must connect to the web client with the regional settings in place.  If you change the value of & local once the user is connected, the new value takes effect.  You will need to sign out and then sign back in.

• fatal error when installing master collection '[FATAL] installation - installation package error C:\Users\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx. Returns the value of pim_installPackage = - 1

  Hello

  When I try to install a trial like photoshop cs6 or master collection cs6 product, I get the error "Installer has not initialized. I used Adobe cleaner to remove all products cs6 and tried again, but no luck, same error.

  I opened the log file and find this line:

  [FATAL] Setup error - installation package C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx.

  Returns the value of pim_installPackage = - 1

  No idea how to fix?

  Thank you, Momu

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html