cfpresentation - manually switch to the next slide

Similar Questions

• Embed the video does not stop when moving to the next slide...

  Hello

  I have a swf file that has 10 slides.

  2 blades have video integrated inside. His works well when I look at continlusly and better bandwidth, but when I tried on lower bandwidth then the video takes time to appear. On average while when clicked on the next slide to ignore the video, overlapping sound happens.

  So what are the best way to stop the previous video of the slide with voice so overcome that problem.

  Please let me know.

  Thank you

  Jonathan morsa

  Have you tried using Insert > FLV or F4V option to see if it works differently to you regarding audio turn off when you switch to the next slide in the file?

  Insofar as the loading time of your videos, try adjusting your project to a higher percentage preloader, for example 50% or more.  However, in general, I would say that you don't place video files even moderately heavy on the slides to the beginning of your project.

• Quiz Skip button switch to another slide that isn't the next slide.

  Is it possible to make the button Skip Quiz jump to another slide outside the next slide? I use 7 Captivate.

  Basically I want the quiz slide to return to another slide that isn't the next slide.

  The default test buttons are not configurable. You can leave the default button of the workspace, insert an identical Skip button using n smartshape which places and set the action.

  Anthony

• How to make a slideshow w/o it automatically move to the next slide?

  Hello

  I have a collection of photos that I want to "slideshowed". I would like that they expansions of to fill the screen. But I want control over how much time the slide is displayed. I want the control to say 'next' (as opposed to iPhoto moving to x number of seconds). I hope I described what I want.

  My question: is it possible? I know it sounds like something that you would do on PowerPoint, but I don't want to resort to that.

  Any suggestions?

  Thank you!

  You can't, but you can set the value display time of each slide to maximum 27 minutes 10 seconds

  

  or the value of each individual slide of a duration of 59 minutes:

  

  Who would do essentially the same thing as you want and allow you to move to the next slide, or return to the previous slide with the arrow keys on the keyboard manually.

  

• Why a slide should a double tap to move to the next slide, the others are simple taps

  Hello

  I have 4 slides of film in a keynote presentation.  3 of them, a single tap once begins the next slide.  But I have a slide film which stops, but needs two cocks to move on to the next.  They all look the same transitions and effects (IE, no)

  Any ideas?

  Barry

  The usual culprits are either an object on the slide, visible or invisible, with animation attached, or the slide is duplicated

• Use the keyboard to switch to the next tab

  I use ctrl + tab to switch to the next tab.
  But this feature does not work since the first tab, only for all other tabs.

  I have the Menu bar on.
  I use alt + f to open the file menu, and so on for all the menus
  Even this command only works for all tabs except the first.

  I tried the shortcuts that you have provided on my Firefox. They seem to work fine.

  This problem could be due to an extension you installed on Firefox. To see if this is indeed the issue, please try Firefox in Safe Mode.

• I can't get the move animation to automatically trigger the next slide

  Hello

  New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

  Pointers or help with this would be really appreciated.

  Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

  the value of the drop of Transition start automatically

  Enter an amout for the delay, if any

• Shuffle all is no longer works, I have to manually advance to the next song or listen to the same song over and over again

  Since the update to iOS 9.3.1 my iphone is more my music mix.  I can type shuffle all, but he played just the same song over and over until I manually advance to the next song.  Any suggestions on how to fix it?

  It's strange because on my iPhone 6 if I hit Shuffle All (at the top - it doesn't matter if my view of my library is on songs, Albums, artists) it certainly mixes between songs and does not play the same song over and over again.

  Just to be sure that we are talking about the same thing-, you tap my music at the bottom of the screen and then click on library above, then press Shuffle All? Because that's what I did and had no problems. Maybe try forced him to leave the music application (double clicking the HOME button, and then drag upward on music app) or even try to do a hard reset of the iPhone (now the HOME and POWER buttons until the Apple logo appears).

• Quiz on progression to the next slide after an incorrect answer - Cp9

  Hi just goes Cp8 Cp9, import an existing module created in Cp8. knows a mistake in action/behavior on a quiz question slide. When the wrong answer is sent, presents legend of failure (it's good, same as before); However, the 'click anywhere to continue' behavior does not to the next slide. On the contrary, remains the same quiz question slide and all captions of your comments are deleted. The remains of Submit button. Tested and when the right answer is submitted Everything progresses well.

  Help, please. It is not happened to Cp8. Can't find it anywhere in properties that an adjustment needs to be done.

  Thank you kindly.

  Terri

  There are a few changes in the quizzes. You are on the latest version: 9.0.1.320?

  You can try to recreate something from scratch with the same settings, check if it is due to the upgrade?

  How many attempts do you allow level question? What is the action "after the last attempt?

• Go to the next slide - problem!

  Hello world

  First thing: I'm not an expert in Captivate, but I learn every day to use this great software... so please, be patient

  QUESTION:

  I am trying to generate a course, very small and simple, but I have a problem: when I click on "Preview", I see that each slide appears after the previous. I need to let the user decide when he wants to move forward!
  Example: I have to generate a slide requiring 2 min of reading, but after this time, it is important to stop Auto progression. I chose not to show the progress bar but the problem remains.

  All commands in a standard advanced action will be executed in sequence. If you want to display an image, you need to allow time for the user to see the image before the read head moves to the next slide. If you are on 9 Captivate, you can use the command 'delay next actions. " An easy way that can also be used on previous versions:

  • Create the button with just the simple command continue
  • Start the chronology of the image just after the point of suspension of the button
  • Extend the chronology of the image until the end of the slide (CTRL-E)
  • Estimate how much time the chronology of the image must be.
  • When the playhead is released by the click of a button, the image will appear and playhead moves until the end of the slide, and then go to the next slide

  

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• Sound does not stop with slide - sound pieces of the next slide

  After four hours of pounding on it and do not understand, I succumb to the demand in the community.  Here's how I did:

  6 blades (just started the project and decided to test it)

  Every slide except #2 has audio speech synthesis of the direction of speech. (I used Paul, but that shouldn't matter)

  I have a button on each slide to continue so that the blade stops for the user to view graphics, etc.  Button action is the next slide.

  When the slide plays, he reached the end of the audio and continues to play audio on the following slides, even if the blade has failed.

  Why didn't t - it's not the sound that stops at the end of the slide?

  You misunderstood what I tried to explain. There is no sense of silence if adds the audio clip itself (should be noise). But in the timeline panel, move the timeline audio off the beginning of the slide and leave space after him as well. Something like 0, 2secs

  

• How can I prevent Captivate to advance to the next slide, after the end of the audio and I click on click to show/hide sidebar box?

  I currently have a slide that plays audio.  While usage is listening to the narration that I can click on three different click the boxes with advanced actions to open and close text boxes, I want the user to read the value.  When reading narrative ends and I'll click on the boxes to click to read a text box, it moves to the next slide.  I understand that I may have to replace the box with smart buttons click but I don't know how to stop the progression to the next slide.  I already have a next button that is put on pause until the user clicks.  Any help would be greatly appreciated.  I'm on a tight schedule.

  Quickly, I created a sample file, just have a slide with three form buttons that act as the toggles and a next button. The first three buttons break late exactly at the same time and the next button.

  Since it's the slide by clicking the audio stops no audio at all (common misunderstanding). I created a shared action, with the purpose to display and the variable (mine are labeled v_one instead of v_visib) as parameters:

  

  StarOne is what you want to show/hide. You can click on infinite time on each key to show/hide this element. He won't interfere not audio, once he started playing he will continue. When the audio is finished, you can still continue to click. Just click on the next button will advance to the next slide. It's my calendar

  

  No need to rewind the playback head in this case at all.

• Why my project does not hesitate a second before moving on to the next slide?

  Hello

  I have a problem on the first slide on my project.  When I press a button to move to the next slide, the audio for the second slide comes immediately as it should, but the project hesitates about a second before it ahead on the second slide.  This only happens with my first slide...

  Any ideas?

  Looks like there could be something heavy on this second slide that needs to load.  Any graphics or widgets or interactions it?  Have you checked the weight?