Button with URL and JS problem

Similar Questions

• I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  It works very well.  Use the screening of high printing quality, but think about what resolution for your graphics card.  In fact if you have higher res images online versions, you can hot link to them from the PDF file.  I used to publish a magazine of the club until a couple of years, and while I've used InDesign, output to PDF format was exactly the same process

  http://www.marlboroughcameraclub.org.nz/photo-news/Arti/photo-news-2013/

  If you want to go one step further, take a look at this example, which uses the SWF to the page turn effect

  http://www.f11magazine.com/current.html

  I assume that your document is a good single page?  Photoshop is a clumsy tool for multi-page documents.

• With key and mouse problems

  First of all, I would like to turn off the box that appears when I place the mouse over an icon.  Several times he gets across what I'm trying to read and many times he says exactly the same thing as the icon.  How do I turn it off?

  Secondly, I have a laptop, and so have a touchscreen tablet.  My mouse seems to float itself or sometimes she does not respond to my touch or tap, and I touch or hit harder.  I watched my mouse properties and everything is correct and answer correctly.  There monte load static or is - it because my finger is too dry?  I am very frustrated and confused.  I hope there, can someone help me.  Thank you.

  Hi margin,

  What is the brand and model of your laptop?

  I suggest to follow the steps below and we update on the State of the question.

  We will clear the display file size information in folder under Folder Options ends and check if you get the file information when you place the cursor over the folder.
  

  a. start Microsoft Windows Explorer.

  b. on the Tools menu and click Folder Options.

  c. click on the view tab.

  d. Click to select or deselect the option information to display in the ends of file file size .

  On the question of the mouse, refer to the suggestions from this link.
  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  After completing the methods suggested above, answer us with the State of the question.

• Problem with cursor and software problem (hard to explain)

  I have a very strange problem and forgive me because I try to explain it.

  For some reason any every so often that I could be typing or doing whatever it is and the application stops responding and a sound will play whenever I press a key. It's almost as if someone clicked on the desktop, so when I type it does nothing. As soon as I click on the program, he responds once again, and I can't begin to do what I want with it.
  This happens about every 2 minutes or so, sometimes more, sometimes less. It can be completely random.
  I tried different mouse and try to use another USB port. Still without success!
  Once again I apologize for the awkward explanation, but I don't really know how else to explain it.
  Thanks in advance!

  Hello

  1. the problem occurs with a particular program or programs?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the mouse?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• Upload file multiple with Flex and ColdFusion problem

  Hi all
  
  I'm trying to resize images after download using the "multiple".
  Upload with Flex and ColdFusion"to
  
  http://www.Adobe.com/devnet/coldfusion/articles/multifile_upload.html
  
  In fact, everyone has a script that resizes the images successfully
  After the download of the images with this method?
  
  The reason why I ask is that I can't work properly, I tried
  all I can think and ended up with the code below. Which
  resizes the images, but does not delete the original file. The error
  who gets dumped is:
  
  "ColdFusion could not remove the file C:\ColdFusion8\wwwroot.
  \MultiFileUpload\uploadedfiles\0040.jpg for a
  unknown reason. »
  
  That does not really help. So I try to delete the original files
  manually, but windows will not let me also and wrote its been used by an application.
  If I download files over that I can then delete the original files
  the previous download.
  
  To me, it seems that the flash drive is not release the file
  
  Any help would be greatly appretiated.
  
  Richard
  
  
  

  Do you have applied the latest patches? There was a problem with locked files after using imageResize.

  http://cfsearching.blogspot.com/2008/04/ColdFusion-801-patch-issue-image-files.html
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402604

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Link a URL to a button with rollover and rollout flash movie clip.

  I've created a navigation bar for my site and I need to add a url for the clip, it was rolling and rolling, but when I put the url it cuts the roll outs overthrown or barrel... what should I do?

  IM using the coding...

  on (rollover) {_root.home.gotoAndPlay (2)}

  }

  (deployment) {_root.home.gotoAndPlay (1)}

  }

  Thank you

  Daniel Derrick

  on (rollover) {_root.home.gotoAndPlay (2)}

  }

  (deployment) {_root.home.gotoAndPlay (1)}

  }

  {We (Release)}
  getURL ("http://www.adobe.com");
  }

• Creation of IDCS6 Mac interactive button with URL

  I was asked to write a series of scripts that will automate the construction of interactive objects such as buttons that activate then a web page or an email address.  I looked at the object model and the button object has a property called gotoURLBehaviors which, if you look at a button that is already created, contains the web address of any web page, the button is shown.  The button works.

  However, if I try to write in this list by using the add method ESTK tells me that this property is read-only.

  How can the use of Javascript, I get my URL associated with the button that I create?

  He got the add method

  var niceButton = app.activeDocument.buttons.add(undefined, undefined, app.activeDocument.pages[0]);
  with(niceButton){
      geometricBounds = [0,0,10,10]
  gotoURLBehaviors.add({url :'www.myurl.com'})
          }
  

• Synchronization with iCloud and pictures problems

  I recently discovered I was missing a few old photos Photos Apple and iCloud. It's about a years of photos from 2014. I think they disappeared right around the time Apple dropped iPhoto and switched to the photo program. I was able to locate the photos in my old iPhoto Library and was able to import them to Apple pictures - so I have them on my computer - but they are not automatically synchronized to iCloud.

  I would like to have all my photos stored in iCloud - I searched the FAQ and user forums but could not find a description of this particular problem.

  Any ideas on how I can get iCloud to import these newly added photos?

  a few thoughts - but with so little information we can only make assumptions

  1 - get up-to-date - you say you have OS X 10.10.5 - you are six updates behind - the latest version is El Captain OS X 10.11.6 - it have many bug fixes and many new features

  2 communicate. us your iCloud and on Mac and on every IOS device status settings

  3 - iCloud is not a backup, is a synchronization service - you need a system with the downloaded original and a backup in addition to the iCloud photo library

  LN

• On Satellite L555-10R with Tempro and disc problems

  Hello

  The service the customer in France did not answer me, I bought a laptop thinking that the customer service was bad. Once more I'm wrong, I come from Acer and I to have the same quality of service after sale = zero.

  So, I'm here to try to get answers to my questions.

  I have some problems for a while on my laptop:

  * _ #1_ *-I am regularly informed of updates of Tempro. Currently the version 3.3 is available. But when I try to install it, I have a message that says:

  * Fatal Error *.
  * Installation ended prematurely after an error *.

  * 2_ # _ *-another problem when I start my laptop, it says that the disk cannot be verified. A window informs me a Drw10 error or something like that.

  I want to thank in advance if you can help me.
  Sorry for my bad English language.

  Good day
  Laurent

  Hello

  Have what ASP you contacted in France?

  With regard to the Tempro.
  I recommend that you set the notebook back to factory settings by using the HARD drive recovery options (press F8-> fix my computer-> HDD recovery).

  End of the process after the retrieve, update Windows 7 to the last State.
  Download the most recent 3.33 Tempro, then try to install this new

  Usually, this should help you

• Rights user to register with services and drivers problem

  I have a computer with a permissions problem in the registry HKLM/SYSTEM. When I try to start some services I get error 5 - access denied. It is the same for the installation of a driver.

  I tried to reset the permissions with subinacl to something like FULL - SYSTEM CREATOR OWNER - FULL, everyone - READ. I also tried secedit to restore default permissions. Seen such permissions in regedit seem compatible with an other computers running Win7. The only way to activate from the services was to set permissions on HKLM/SYSTEM to everyone - FULL. Then, the system can connect at least on the network.

  The "Access denied" message when you install a driver rest again, when I use Process Monitor I can find some results ACCESS DENIED to create the new key in HKLM/SYSTEM/services for DrvInst.exe process. Process runs under NT AUTHORITY/SYSTEM account and the level of integrity of system. I have also some ACCESS DENIED results for files in the WINDOWS\System32\DriverStore hierarchy.

  If the problem has been resolved. The cause was the Aztec Media Settings Manager distributed with Softonic downloads malware. After removing this malware, everything works like a charm.

• 4.2 of the ACS and EAP - TLS with AD and prefix problem

  Hello

  We have the following situation:

  -2 X ACS (ACS SE 4.2 1 x and 1 x 4.2 ACS) for domain

  -2 x ACS (ACS SE 4.2 1 x and 1 x 4.2 ACS) for domain b.

  First of all, there is a problem to have an ACS SE and a CBS work together for an area, I do not? When we haven't had that one area and the two SE ACS were responsible for domain A, it worked.

  Now after the changes, authentication of machine with EAP - TLS is no longer in effect. In the newspapers, it always says that "external user DB is unknown" for a username (machine) as host/abc.domain.ch

  This is the normal output of the Remote Agent, he finds the host but then nothing happens:

  CSWinAgent 2009-11-30 16:32:13 0140 3672 0x0 customer who connects from x.x.x.x:2443
  CSWinAgent 2009-11-30 16:32:14 0507 3512 0x0 CPP: NT_DSAuthoriseUser received
  CSWinAgent 2009-11-30 16:32:14 0474 3512 0x0 NTLIB: Creating Domain cache
  CSWinAgent 2009-11-30 16:32:14 0549 3512 0x0 NTLIB: domain Cache loading
  CSWinAgent 2009-11-30 16:32:14 0646 NTLIB 3512 0x0: none of the trusted domains found
  CSWinAgent 2009-11-30 16:32:14 0735 3512 0x0 NTLIB: cache loaded field
  CSWinAgent 2009-11-30 16:32:14 2355 3512 0x0 NTLIB: user "host/abc.domain.ch" found [FIELD]
  CSWinAgent 2009-11-30 16:32:14 0584 0 x 3512 0 RPC: NT_DSAuthoriseUser response sent

  So I did a test of the ASA to see if the host is a problem (until changes have been made it was not a problem):

  AAA authentication RADIUS host 10.3.1.9 username host/abc.domain.ch to test (the ASA becomes the host / entry for the correct Windows scheme with the $):

  CSWinAgent 2009-11-30 15:39:23 0140 3672 0x0 customer who connects from x.x.x.x:1509
  CSWinAgent 2009-11-30 15:39:23 0390 0 x 3728 0 RPC: NT_MSCHAPAuthenticateUser received
  CSWinAgent 2009-11-30 15:39:23 0474 3728 0x0 NTLIB: Creating Domain cache
  CSWinAgent 2009-11-30 15:39:23 0549 3728 0x0 NTLIB: domain Cache loading
  CSWinAgent 2009-11-30 15:39:23 0646 NTLIB 3728 0x0: none of the trusted domains found
  CSWinAgent 2009-11-30 15:39:23 0735 3728 0x0 NTLIB: cache loaded field
  CSWinAgent 2009-11-30 15:39:23 1762 3728 0x0 NTLIB: had WorkStation CISCO
  CSWinAgent 2009-11-30 15:39:23 1763 3728 0x0 NTLIB: Windows authentication attempts for user ABC$
  CSWinAgent 2009-11-30 15:39:23 1815 3728 0x0 NTLIB: Windows authentication FAILED (Error 1326 L)
  CSWinAgent 2009-11-30 15:39:23 0373 3728 0x0 NTLIB: retry authentication to the domain
  CSWinAgent 2009-11-30 15:39:23 0549 3728 0x0 NTLIB: domain Cache loading
  CSWinAgent 2009-11-30 15:39:23 1762 3728 0x0 NTLIB: had WorkStation CISCO
  CSWinAgent 2009-11-30 15:39:23 1763 3728 0x0 NTLIB: Windows authentication attempts for user ABC$
  CSWinAgent 2009-11-30 15:39:23 1815 3728 0x0 NTLIB: Windows authentication FAILED (Error 1326 L)
  CSWinAgent 2009-11-30 15:39:23 0456 0 x 3728 0 RPC: NT_MSCHAPAuthenticateUser response sent

  It is clear that the test failed because of the bad 'past to a computer' but it's a different output as before. I saw that in ACS 4.1, you can change the prefix of send_break_action for nothing, but in 4.2 it is no longer possible.

  This could be the problem, or if someone sees no other problem?

  Best regards

  Dominic

  Hello

  I encounter the same problem with my acs. I have all of the attempts failed for the default group. For the default group made configuration is not available. Is - this thereason behind all this?

• BIOS with S10e and 14cn97ww problems

  I've updated my s10e at the new 14cn97ww of Bios version (via automatic update of lenovo thinkvantage service). Now I have can´t access to my Bios by pressing F2 or in fact any button to start upward.

  I have can´t system access recovery too for this matter and splashtop doesn´t start either (but it is enabled in the lenovo quick start tool).

  Windows XP starts works fine and still, but it bothers me that I have can´t access Bios and Splashtop. Y at - it assistance for this problem? I tried to change the Ram, tried to remove the battery and pressing the power button and tried to downgrade the Bios which unfortunately didn t work.

  Help, please.

  Thanks in advance.

  After calling the Lenovo Customer suppot I tried removing the battery and press the button 'market' a few times more and now everything is back and working fine.

• Web Service - Call with URL and SOAP in return?

  Hello

  Is it possible to call a WebService for Coldfusion with a URL like http://site/component.CFC?method=doSomething & parm = 1 and send the response returned as SOAP? Seems that I get a response from wddx when I do it this way. I know that I can create a web service object and call from Coldfusion, which is really nice because we can use the SOAP response as a query object. Is it possible to do this "invocation" from a http call?

  Thank you!

  I used this approach for interacting with SWC to an Ajax call on the client, return JSON or XML of the CFC, but don't think that this approach would be ideal to return a SOAP response.

  Technically, you can use this method to return a SOAP response, however, this means that your method of CFCS should generate and return the XML SOAP itself. CF automatically will do that for you as it does when you call a CFC as a Web Service.

  You can call a web service to CFHTTP, but I think it's a lot more work than using CFINVOKE. There is a post of nice blog on this approach:

  http://www.jamesnetherton.com/blog/2007/01/14/invoking-a-WebService-using-cfhttp/

• 11G with ASM and RDBMS problem when the server reboot (dependencies)

  Hello
  
  I just install the new version 11G with ASM for the first time. When I restart my server, RDBMS start before the ASM service isn't over to start. It's like when the care services, CSS and EVM have been replaced by the OH dependencies have been lost. The OH service is started but it's as if he is not optional and others start immediately (ASM and RDBMS).
  
  Early restart, I see the OHservice started and the DSO after that (on the road), but when the RDBMS starts the instance handle of stay (inactive and not mount) because unit number logic for the catalog of service is not available yet. I see in the alert.log to RDBMS catalog segment is not found or not existing (/ catalog not nfound).
  
  If I wait about 3 to 5 minutes and restart only the RDMBS all start without problem.
  
  Is there a way I can adjust the stop with the 11g version service or use the crsctl to indicate to the RDBMS service start only when all the ASM service (MON) segment are mount?
  
  Thank you

  Normally the database is started by the clusterware and not by the windows service.

  Thus, there could be 2 ways to do this:
  (a.), try to assign the Windows of the database service to manual. It must be started by clusterware.

  If that doesn't work, try this:

  (b) leaving the service to automatic startup (Windows), but disable the automatic start of the database. This you can normally change in the registry
  -Online-online Oracle-online key HKLM => ORACLE__AUTOSTART
  (not 100% sure on the key, but I'm sure that you'll be able to find it.)

  Unfortunately do not have atm WindowsCluster to try it myself.

  Additional please check if your db instance has the correct dependencies defined in the clusterware.
  Make one

  stat ora res crsctl. .db Pei

  and paste it here.

  So good luck...
  Sebastian