11G with ASM and RDBMS problem when the server reboot (dependencies)

Similar Questions

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Why is the uncompadible again toolbar google with ff5 and his long, since the introduction of ff5 why havnt u fixed it

  Why is the Google toolbar always uncompilable with ff5 and his long, since the introduction of ff5, why do u not have this fixed

  You are welcome.

  Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

• Dell XPS 15z: "your battery is temporarily disabled. If please shut down your computer and try again when the unit is in the operating temperature"

  Hello

  last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off.

  the laptop refused more late start... therefore I reconnected it the charger and the laptop turned on with the light that displays the State of charge (white light near the intersection of the keyboard screen) starts to blink in a cycle of 5 times... 4 times orange and 1 white time... and this cycle continues until I use the laptop.

  and this message when I go to THE BATTERY option "your battery is temporarily disabled. Please shut down your computer and try again when the unit is in the operating temperature"my cell phone is outta warranty... what should I do? kindly help

  hchentanshankar,

  Welcome to the community.

  I am sorry to read that you are experiencing this issue.  The battery is likely guilty, but you should check to see if there are any problems with the laptop or AC adapter / CC before you rush out and replace the battery.

  I would start by checking the bios, boot the system by pressing F2 to enter the bios, you can also press F12 and select the bios menu.  Once in the bios look for the option for AC adapter warnings, if they are disabled they can and save the changes. If there is a problem with the adapter, you should start getting errors on the adapter.

  If the adapter seems well, disconnect the battery from the system and turn off the laptop.  Wait an hour or two and then replace the battery and restart the system and see if you continue to get the message.   If you can run the laptop on battery only to leave the battery completely and then load it again and see if the problem returns.

  I know that this may not be possible before you buy a new battery but if possible try a power adapter and the battery and see if the problem persists.  In this way, you can know if the problem follows the laptop battery or the AC adapter.

  Please let me know what you find.

  TB

• Installing Oracle 11g with ASM

  Hi all
  
  I'm new with oracle 11g and I want to create a database with ASM and I can't get there.
  Could someone tell me the step to make or send a link here?
  Fact the below steps
  1 - install the software oracle only
  2. install and configure grid infrastructure
  3. create the database with asm
  
  Thanks in advance

  Salvation;

  Please check the docs below for steps

  http://www.Oracle.com/technology/products/database/ASM/index.html
  http://www.Oracle-base.com/articles/11g/AsmEnhancements_11gR1.php
  http://www.pafumi.NET/RAC11g_and_ASM_on_VMware.PDF

  Respect of
  HELIOS

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted (zip also does not work)

  Cannot install adobe creative suite 6, do not load and install further when the second cd is inserted

  This question is unanswered.

  artistichooves artistichooves February 6, 2014 06:31

  I've only had 3 programs installed with the two cd I got with my adobe creative suite 6 (edition education, student and teacher)

  It didn't load any further when I insert the second cd. (tried several times) on my windows 8.1

  I got a license number, but it does not work on the creative cloud

  I tried to download the zip file, but it did not work

  I have ragequited (sorry)

  and now I want to try again.

  -J' have the license but I can't use my cd or download the zip

  -are there a cd I can buy again or something?

  It seems that my series works more :/

• still no luck with highlighting and try to use the Edit with photoshop elements Editor

  still no luck with highlighting and try to use the Edit with photoshop elements Editor.

  Yes, I clicked the change of use with photoshop elements, editor in Chief but still, don't put not to...

  region and I select view selected in organzier files. I don't understand what is happening. I never had this problem before and I have 12 for a long time.  How can I fix it?

  
  

  You can keep answers to the original discussion, or it's going to go very confusing - http://forums.adobe.com/thread/1438997?tstart=0.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• My husband doesn't like the itunes account is under my name.  I have a way that he can have his own name and sign on with her and still exist on the family account?

  My husband doesn't like the itunes account is under my name.  I have a way that he can have his own name and sign on with her and still exist on the family account?  Also, have we HAVE two-step verification?   It's a real pain.

  Yes it can have its own ID and share your content via the family sharing, he needs to sign out of your ID and to create his own, then one of you needs to invite another family sharing.

  You don't need to use 2 verification step, if you want you can disable to my Apple ID

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Hit to the broad area when the server is connected to the internet

  We have a new server running windows standard server 2008R2. When the server is connected to the internet, the computers on the domain are faced with offshore and they receive the error message saying "Unable to connect to the database". How we solve this problem?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• Restart the scheduled task when the server is restarted

  Hi all
  
  I have a work planned and executed through Service Center control. Then, the server has a regular job of system which restarts every week.
  
  I would like to know what is happening with this scheduled task when the server is restarted. I understand that I must again manually lunch at work.
  
  Anyone know what is the easiest way to automate a task that starts the task OWB?
  
  Thank you very much in advance for your help.
  
  Concerning
  Victor.

  Hi Victor,

  I understand that I must again manually lunch at work.

  you don't need lunch again job - OWB.
  Employment in the Oracle database still in State SCHEDULED after restart of the database.
  It is a problem of OWB, she had lost the synchronization status of a task planned with Oracle database

  Kind regards
  Oleg

• How to set up the database restarts automatically when the server starts?

  Hello
  
  What is involved if I configure Oracle database starts automatically when the server is started/restarted?
  
  I guess that change the following entry in/etc/oratab
  

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:N

  TO

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:Y

  is not sufficient - there is more than that. But what is it?
  
  We can also configure the listener to automatically re / start?
  
  I guess that everything what is the solution, it will also apply to Oracle 11 GR 2 databases/ASM - right?
  
  The platform is Redhat Linux 64 bit (version 4.7 & v5.9).
  
  Thanks in advance!
  
  Best regards

  Hello

  Below is one example of autostart services database and the listener.

  1 > make/etc/oratab file entry Y as:
  ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

  2 > create a file called "/ etc/rc.d/init.d/oracle" as root, containing the following.
  --------------------------------------
  #! / bin/sh
  # chkconfig: 345 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Define ORA_HOME as equivalent to the $ORACLE_HOME
  # from which you want to run dbstart and dbshut;
  #
  # Define ORA_OWNER to the userid of the owner of the
  # Oracle in ORA_HOME server.

  ORA_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  ORA_OWNER = oracle

  If [! f $ORA_HOME/bin/dbstart]
  then
  echo "Oracle startup: cannot start.
  output
  FI

  case '$1' in
  'Start')
  # Run Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
  known - $ORA_OWNER - c $ORA_HOME/bin/dbstart
  ;;
  'stop')
  # Stop the Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c $ORA_HOME/bin/dbshut
  known - $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
  ;;
  ESAC
  -------------------------------------------------

  3 > use the chmod command to set privileges to 755.
  chmod 755 /etc/rc.d/init.d/oracle

  4 > associate the appropriate oracle service run levels and set it to auto-start by using the following command.
  chkconfig--level 345 oracle on

  Note:-back, I've done this for a long time... Please check the dbstart use pfile or spfile to start the database instance.
  Thank you

• Problem when running server SOA

  Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
  
  12 characters do not match "Expressions of folklore <>" expected "" "
  TForm is running and is accepting applications
  12 characters do not match "Expressions of folklore <>" expected "" "
  
  When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
  
  Could you help me? If I'm going to write more information.
  
  Thanks in advance
  
  Edited by: 948093 2012-07-23 06:07

  Hello

  It seems that when you call after a command.

  startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

  try this way.

  soa_server1 startManagedWebLogic.sh T3: / / :

  Make sure you gave Admin Server port or not.

  Check your config file to check the port and IP address or correct.

  Kind regards
  Kal

• password by default when the server is inaccessible

  Hi, I recently configured AAA. When the server is running everything is fine, but when the server is inaccessible, I'm locked up. How can I put on a default user name and password when the server is inaccessible

  Thank you

  James

  There are several ways to configure AAA so that you are not locked if the server is not available. You can use a username that is configured locally, as you suggest here, or you can use the configured line passwords.

  To use a locally configured user your configuration might look like this:

  rick user password Cisco

  AAA authentication login default group Ganymede + local

  Or, to use the online passwords as a backup of your config might look like this:

  AAA authentication login default group Ganymede + line

  You also probably need a backup to access the privilege mode. This is done usually by using the configured locally enable secret. To do this configuration might look like this:

  the AAA authentication enable default group Ganymede + activate

  HTH

  Rick