Buttons and objects multiple multi - State

Similar Questions

• Insertion of a button to close a multi state object

  Hi all

  Have worked for centuries trying to close a State multi, joyless object to a button.

  This is the process I followed, which I was hoping the consequences.

  I have create a block of text, which is then cut and copied into a broader framework. This image is then set to "worthy framework to content.

  This framework is also defined as a block of text scollable (Auto Detect, Hide bar, position to use the Document).

  This frame is then copied with the narrow graphic and I chose the 'convert selection to a multi-state object. I have ensured that graphic close don't overlay not the text box.

  State 2 then then made transparent and subject to State multi is set to "hidden so that triggered".

  I double clicked on the close image within the Group and converted into a button. The button is then attributed to go to State 2.

  Finally I fund a graph that is converted to a button that opens the 1 State of the multi state object.

  But it does not work. There seems to be a copy of the State multi object generated during the above process and this ensures that the State multi object does not disappear when you click the close button.

  I tried all kinds of ways to make this work, but without success.

  Makes me mad and would appreciate really no work about being posted here.

  Thank you very much

  H

  What text? The button?

  If so, don't convert it to a button. The buttons are still pixelated. Instead

  just leave as native work and draw a no fill/no frame run above it

  and convert that to a button.

• Interactive buttons under multi-state objects?

  I have a multi-state object that changes state when a key is pressed. The object of several State is a superposition of the entire screen, showing additional information on the content of the button is. I have the set opacity so you can still see the buttons behind the object of several State. But you can also interact with buttons, even if the multi-state object is on the buttons. Is it possible to change this?

  If you can see, you can interact with them. If you want to block put a button them in each State and have to go to the url with navto://nul

• Create a slideshow inside a multi-state object

  Hi, first of all I'm pretty new to DPS hope if this isn't a stupid question. I created an object multi-state for a picture show/hide effect. In the main report, I want to create a slide show, however when I select the objects I want to choose the State of object of slide show with her just to copy the State they are, rather than creating a new multistate with just images for slide show.

  So I guess the question is is it possible to create a nested object of multi-state?

  Hope that all of the senses.

  Thank you

  
  Paul.

  Can Felipe - you put the script?

  Here's another example and instructions:

  http://ContentViewer.Adobe.com/s/DPS%20Tips/7f80a0ffed3a4ff08734bc905aac4a29/DPS%20Advance d%20Overlays/14_NestedMSO_CS6.html

• DPS - simple edition - PDF rendering, text of multi-State performance issues

  Hello

  

  Please advise on the question above...

  On a retina display ipad, I have problems with States multiple objects that contain text. The left column is a clear text, object not multi-state. However when I place the text in a multi (right) state object it is not rendered in high resolution. A bit pixelated.

  One question - Cloud Creative License

  iPad Version original Gen III retina

  My application is compiled using the version of the app: v24

  I also experienced performance issues of the use of the PDF manual... When you edit a page, everything is super grainy and then ~ 2 seconds later it makes crisp. It used to be made in advance, or much faster. Maybe I was using PNG? I went in mode like PDF than recommended in countless articles. Is that the slow makes just an induced effect of PDF? What can I do to optimize? Recommendations?

  Thank you very much!

  Richie

  You must select PDF as the format and optionally vector in the slide show of the Group Folio overlays pane.

  And Yes, the delay in rendering is something you have to live with for now.

  Bob

• Animations, and multi-state object buttons

  Is it possible that I can have a button that works with animations, into a multi-state object?

  When buttons, that departure/return animations, convert into multi-state objects, buttons to lose functionality and I can't have their target in the menu animation.

  Use the edge or convert animations using in5 to overlays of web.

  Just to be clear... we are talking about DPS here, right? Not EPUB or publish online?

• Dynamic object multi-state buttons sometimes remain in hover state.

  I created a lot of buttons multi-state smart shape (Cap 9, not a responsive project). All the buttons perform the desired actions, but they sometimes remain in the rollover State even if the cursor is not over the button. The error seems to occur when you move the mouse quickly from one button to another without clicking. Is this a known issue? Does anyone have a solution or work around it? Thanks for any help!

  Kurt,

  Looks like you may have discovered a bug.  I suggest that you connect this issue with Adobe.  I don't have a miracle solution that I can offer.  I think you are right that the problem is caused by the speed with which you access objects. The browser detects the mouseover event but seems to be missing the mouseout/mouseouthandler() event that follows immediately after.

  This happens with other browsers?  You will find that it is just the IE who has this problem.

• The use of objects multi-state for the next stage of the course 9

  In my old clumsy e-Learning authoring tool, I could create a slide with several steps. You would click the button Next to display text and graphics.  When you get to the last step, the next step button disappears, so that you know that you have completed. How can I make this work with multi-state Cap 9 objects?  I created an object with 3 States multi-state. I created a button with an action go to Next State.  It is fine until you get to the last State.  If you click the button again, it starts again with the first State.

  Yes, I can create several buttons. But I really just want a button called next step which disappears after posting the last State.  The user would know that she had displayed all the steps.

  Any suggestions are welcome.  Thank you.

  Jeanne M

  Here is a sample script:

  

  This has been implemented for 6 States (for a container of text, the Normal State is an empty form).

  There are 2 user variables:

  • v_counter has a default value of 0
  • v_max is the number of States, you can replace it with the literal '6' or you need to

  The first decision "done" check if the counter reaches the maximum value (v_max). If this is the case all States should have been disclosed, and it should end the loop. That's why this decision will disable the button used to change States (SB_StateTrigger) and here also to change its status to an invisible state (AfterLoop). Upon return to the slide, the State will be back to Normal (visible), and simply activate the button again. You can replace this with a simple action to hide as well if you want.

  If the first decision is not true, there are still reports to be shown and the counter is incremented.

  All 6 other decisions are similar (I collapsed 2 of them): they will test the value of the counter and show the associated State. I used to state3 on a common standard. This makes it possible to use exactly the same advanced also action if the total number of States is less than 6. Simply change the value of v_max.

• Multi-state object, smart in cap 9

  I have 5 buttons multi-state 1 slide. Each of them changes the State of a separate object. It works as expected with the exception that I would like each button on remand in an inactive state when clicked. Should I change action each button in a tip action that changes the State of the separate object AND change the State of the button itself to low to make this work? If Yes, what is the point of having a State down a a button shape smart so it does not remain in the State once clicked down?

  Thanks in advance for any answers.

  The variables are so close to measures progress/shared how can you live without variables when talk that you are experienced with advanced actions, I do not understand. The best way to start with advanced or shared actions using system variables in the group 'Film Control'.

  What I explained on the States of the button is common to all the buttons in all applications, not only to the shape buttons in Captivate. Just to clarify.  The limitation that exist in Captivate is that you cannot change the form for Inbuilt says (hope that changes later), but you can add as many custom reports you want, and those who have no limitations. Create a 4th state that resembles your idle state, which is very easy with shapes.

• Multi-state objects appear on the top

  I'm knee-deep in my first iPad/Digital edition design. I have some objects multi-state containing buttons (to change the State on - click a grade side is that a less frustrating way to do this?) that are supposed to appear behind other objects. When I go to preview, he puts these objects on the other, by concealing the things that are supposed to be at the front. Layers seem not to matter, order of creation of objects seems not to matter and clearly the arrangement is not serious.

  It is supposed to look like this (InDesign):

  

  The preview looks like this (Content Viewer):

  

  I moved this to the DPS forum.

  Yes, the only thing which may exceed an interactive element is another interactive element. Create two State ESM with identical States set to play once, is the usual solution.

• Multi-state objects in InDesign CS5

  Hello everyone, I'm doing several States objects in InDesign CS5...  I have two objects multi-state on one page, and I have a few buttons in one of the several state object, when I checked the button actions, I don't see the second name of the multi-State under 'Object' for this button object.

  Can someone pelase guide me, the way that get this multi-state object second name under the keys please?

  Thank you very much.

  You cannot contol one MSO on the other. This is a limitation of InDesign.

  There are solutions but without seeing the document, it is difficult to

  recommend a.

  Bob

• All the States of the button convert objects

  Is there a function to convert all the States of the button objects?

  Button to convert to object"function converts only the active state, other States are lost.

  I don't know why it works this way because multi-state objects have an option to "liberate all the States of objects.

  Of course, I can do it manually by duplicating the button, selecting the rule of law and by converting each State of the button to an object. But there may be a single function for this as with the multi-state objects?

  Sorry about that...

  Here's the script for the button:

  var i, b = app.selection[0];
  
  for (i = b.states.length - 1; i >= 1; i--) {
         b.states[i].releaseAsObject();
  }
  
  b.convertToObject ();
  

  Hope that helps.

  --

  Marijan (tomaxxi)

• Multi-state object does not work in the Office Viewer

  I have problems with a slideshow of image (multi-state object) in a manufactured magazine Adobe DPS.

  When looked at on ipad or android, everything works perfectly. But this does not at all on the Viewer from the office.

  is this a known bug?

  Is there a work around for the next issues?

  

  Here is a link to this question with this question:

  ECO Sustainable Design Office EN 2015: peace in a former tobacco factory

  Kind regards

  Myra

  Myra,

  Office Viewer is old and it is really useful only for the most basic content preview. We have not updated the Viewer from office more than three years. I suggest to use the iPad or Android directly devices to get an overview of your work.

  Neil

• version 8.0.2 of iOS on iPad Air, AutoPlay multi - State Object question

  Hello

  I'm having a problem in which some objects multi-state value auto-play and stop finally State do not play in the Adobe Content Viewer (version 32.1.0) iOS on iPad running iOS 8.0.2. On the desktop, I work in an updated version of InDesign CC. Oddly, some objects multi-state (in the same articles) do work: both are looped MSO, but change the DCL of non-working (which consist of a container empty like State 1 and describes the text (no States have applied effects) to State 2) to the loop does not solve the problem.

  I am at a total loss - I have tried to reconstruct the ASM, the reorganisation of States, change timer values, defining the DSO to loop, reverse order... but nothing works. There seems to be a question Content Viewer (version 32.1.0) iOS 8.0.2, IOS because WHO play as expected in the office and on iPad content viewer using earlier versions of the viewer of content on the version 8.0.2 of iOS and iOS 7.1.1 and iOS Content Viewer (version 32.1.0) running on iOS iOS 7.1.1.

  In addition, after reading a folio in Adobe Content Viewer (version 32.1.0) on an iPad to Air and return to the display of the library, the settings gear icon disappears also. Typing in the box where the icon should be always displays the menu. This does not happen on a Mini iPad.

  Any advice would be appreciated.

  It is a known issue that we will address with our statement on Monday.

  Neil

• Object with several States and slider in the "folio" are pixelated, settings seem correct.

  I can't keep an object with several States to be rasterized text, as well as a slider which is also dithering.

  I read that you are supposed to adjust the folio, and article up to be .pdf and the cursor should have the possibility of vector chosen.

  I have not found anything to object state multi for these parameters.

  What happens is when I exit the folio to Adobe Content Viewer, only the text of these items is rasterized. All other texts to be crispy. Tested on Mini iPad and iPad retina and both are blurred.

  Is there a way to force the vector option? It seems even with the selected options it is still screening test in interactive elements.

  Thank you!

  I don't know if I missed something, but it seems to work now. Maybe the v26 option (I deleted the old folio and recreated, and it works as expected now.)

  Can you send me a link to information about the scrolling content and the position of the document? The method I used the frame was from an article of Adobe, although it could be old.

  Thanks for your help!