Buttons and video Clips (in and out)

I'm working on my own website for my graphic design work and I use flash for the introductory movie, you can either ignore or after a time, will send you directly to the home page.

On this introduction movie (which animatedface_mc sick call) I put two other clips with flashing eyes (left and right). The eyes would be constantly flashing, this page is in progress. That we work.

On the side are buttons of the names of celebrities and once clicked on adding video clips to the main animatedface_mc. For example if I clicked on the monroe_mc, it adds this famous Marilyn Monroe mole (using the mask or opacity, depending on the function of the face) on the animatedface_mc. If I clicked on tyson_mc, he adds his face tattoo. I used the following code to it:

monroe_btn.addEventListener (MouseEvent.CLICK, monroeshow);
function monroeshow (event: MouseEvent) {}
monroe_mc. Play();
}

tyson_btn.addEventListener (MouseEvent.CLICK, tysonshow);
function tysonshow (event: MouseEvent) {}
tyson_mc. Play();
}

There are at least 10 other buttons on this page, but I just realized that some of the features of the face are running too and so seems not good. I was wondering if there was a way that when you click a button, it turns off the video clips which are already turned on, so maybe that tyson_mc and chaplin_mc were already, and I clicked on monroe_btn, monroe_mc shows to the top and tyson / video clips chaplin may be disabled. Tyson and chaplin buttons would still be clickable, it's just that their film clips, if already, could be put off.

I tried the following, but it doesn't seem to work: tyson_mc.enabled = false;

Thanks in advance for the help.

You need not have a frame on the main timeline 2 If you have any framework 1 now.  You can use tyson_mc.visible = true;  When it is click on the button of tyson as if it was previously invisible, it becomes visible again.

That would be the basic series of commands by clicking a button that is capable of producing...

function resetMCs() {/ / shared by all buttons}

monroe_mc.gotoAndStop (1);    or monroe_mc.visible = false;

tyson_mc.gotoAndStop (1);       or tyson_mc.visible = false;

}

monroe_btn.addEventListener (MouseEvent.CLICK, monroeshow);
function monroeshow (event: MouseEvent) {}

resetMCs();

monroe_mc. Visible = true;

monroe_mc. Play();    See the comments below
}

tyson_btn.addEventListener (MouseEvent.CLICK, tysonshow);
function tysonshow (event: MouseEvent) {}

resetMCs();

tyson_mc. Visible = true;
tyson_mc. Play();       See the comments below

}

If mole and tatoo movies don't really animate at all and tell them to play fair, then you could end up with several images for them and only control their visibility instead of telling them to play.

Tags: Adobe Animate

Similar Questions

  • Buttons in video Clips

    I am currently working with a menu and submenu buttons in the video clips - the script on the buttons in the clip is

    on (release) {}
    gotoAndPlay ("scenename", "#labelname");
    }

    When the button is tested by itself, the code works, but when the button is placed in the clip that it doesn't work anymore - is there a way to make the buttons work to in the clip?

    -Bill

    Yes, to return to a level, you can use this...

    on (release) {}
    _parent.gotoAndPlay ("BlahBlahBlah")
    }

    _parent. you will do as many levels as you want to go and _root. you will need to return to the main timeline.

  • buttons inside video clips

    I created a button and placed within a clip.  I added the script (as2) the button below however when I test the movie, the button does not work.

    on (release) {}
    tellTarget (_root) {}
    Stop ("226");
    }
    }

    The button is located in clip "page1".

    Page 1 is on frame 120

    I don't know that I have not included.

    Tracey

    You may be having a problem because tellTArget is supposed to get a string argument, and maybe because you are citing the frame number which must be given not (unless it's an image tag).  Since you are using AS2, try using...

    on (release) {}
    _root.gotoAndStop (226);
    }

  • Need help... buttons & amp; video clips

    On stage 1, I have a movie clip symbol. Inside the movie clip symbol are the button symbols that are being animated. Basically, I want these buttons allow to fly on the screen and the user and then click one of these buttons to go to an image within the current scene label (btw, there is only 1 scene and it is called stage 1). The buttons are created and the animation of their flight on the screen works beautifully; However, they do not attend any image labels.

    In my button symbols, I have my different States.
    In my video, I placed the button symbols, created animations, and in the last frame on each button, I have a goto action script and read the label for specific image.
    In my scene, I placed the clip.

    What I am doing wrong?

    Richie - you totally rock! Thank you very much!

    Just in case anyone has the same problem, I've done here is the answer that Richie gave me...

    I think that something is wrong with the call of the film of root with the image tags. I coded buttons on the main reach timeline directly it worked fine. For example... If you put this

    on (release) {}
    _root.gotoAndStop (13).
    }

    on the 2 button on the project, it works fine. The code just the buttons with the frame number and you should be home free. I hope this helps.
    Richie

    THANK YOU ONCE AGAIN RICHIE!
    Kimberly

  • How to make a reset button and add the action script to reset all my drag drop video clips

    It's HOT need help quickly by the close of business Thursday

    Hello kglad and all, I have a problem with adding a reset button for my drag and drop video clips.

    The problem is, if a student dragging a movie clip to a wrong address on the SWF, I want them to be able to hit a reset button that would lead the SWF even they opened and what would showup a page clear to restart drag them and drop exercise.

    I know how to make a button for this want just the appropriate action script to be able for the user to start over with no symbol of clip from movie on the page.

    Seal55

    You must either code to reset everything or you can reload your current page:

    loadMoveNum(this._url,0);

  • Several video clips on stage and layers - play and pause all (via the buttons)

    I've been designing a Visual presentation in Flash CS5, there are a few video clips on the stage who are set to play a certain amount of time. The problem I have is that I'm not familiar with coding/actions. I want to have a play and a pause button to pause at any time (not a given) and speak with the public. Then, I want to be able to click on the play button to resume from there (wherever I stopped of). I hope get help and be able to learn from your responses. I don't know how clear my question is, but I can clarify if you need me for...

    Thank you very much!

    If you see no error message and everything works the way you want, you're good.

  • Dynamically place video clip on the corner and the overall position with a mouse click (button) that is always running.

    Anyone know the code to find the global positioning of the coordinates X and Y of a click of a button which turns constantly,
    then the code when you click the button, it displays a clip on the top-(position de x et y lorsque vous cliquez dessus) to the angle that you clicked (so the buttons are always rotating so others can click on them where they are)

    to explain the context, I am designing a model to the top of an interactive round table
    When someone approaches her and click on one of the buttons that move, it reads where the person has clicked on it and open a new box (video clip) where they have clicked on it (on the corner) so is not backwards if you're upstairs.

    I have included my .fla file that shows the four navigation buttons and a small diagram
    explain what I'm trying to do.

    you don't have a class named MethodAnimalMC.

  • Video clips as buttons - regardless of my actions to stop and event listeners

    OK, so I think I'm along with related good files to show you guys! Learning just about everything, so forgive my ignorance so far!

    In any case, I'm just trying to understand movie clips as buttons and followed along on Lynda.com - however, I seem to do these things, but when I test my movie, the button loop just independently the bearings or the actions of the judgment.

    You can check this address www.midnyc.com to see anim failed, and you should be able to import as well. Here is my code:

    reversal function (e: Event) {}
    myBtn.gotoAndPlay ('in');
    }

    myBtn.addEventListener (MouseEvent.MOUSE_OVER, reversal);

    function implementation (e: Event) {}
    myBtn.gotoAndPlay ('out');
    }

    myBtn.addEventListener (MouseEvent.MOUSE_OUT, rollout);

    Thanks in advance for your help. And in KGLAD, thank you for recommending how publish a little better! Given that I've ever had links etc... Sorry about that.

    Do you have any kind of error messages?  Normally if there is an error in coding, clips and other things go haywire.

    For you, the event handler functions, try to specify the event that corresponds to the event of the listener...

    function implementation (e:MouseEvent) {}

    I think that 'EVENT' would be a mistake anyway... 'Event' would be correct

  • Buttons and video clips

    I have a number of buttons in a single clip. If I type this code in the movieclip, where there are the buttons it should work?

    Pic2.onRelease = function() {}
    photo_mc.loadPhoto (image [2]);
    picture_num();
    }

    He has not worked for me, don't know if the clip is preventing to be clickable, but the roller on the effect of the buttons works.

    first of all, I would place the code in frame 1 of your document and from there is much easiert to target any nested object, for example. I have a movieclip with 5 buttons, movieclip is called "myMC" and buttons are called "myBut1" at 5. I have them would target the root of this way.

    myMC.myBut1.onRelease = function...
    myMC.myBut2.onRelease = function...

    I don't think there should be a problem with the buttons inside movieclips, but I normally always use movieclips as buttons and not the native flash button object.

  • Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

    Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

    I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

    I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

  • Can I change several non-contiguous single video clip segments and the remaining segments together in a functional element?

    I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

    Windows XP

    Movie Maker 5.1 (2.1.4028.0)

    I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

    Windows XP

    Movie Maker 5.1 (2.1.4028.0)

    ============================================
    The cartel command only works if the video has been imported
    in segments (this only happens when "create Clips for video
    Files are checked in the import screen.) or if the files are divided
    in the timeline with no editing. If the files are changed or re -.
    organized the handset command will not work.

    You can save segments individually if all other files are
    removed from the timeline. The original file must be
    adding to the timeline and edited for each successive change and
    record.

    Easy solution... you can combine edited clips by registering the
    the project in the. WMV format. The result will be a single. WMV
    video file.

    XP Windows Movie Maker 2.1...
    To save in a .wmv movie file...
    Type of... CTRL + P (or go to...) File / save movie file)
    to open the wizard movie recording.
    Choose... My computer.
    Next /.
    Enter a name and a location.
    Next /.
    ICT... "Best quality for my computer.
    Next /.
    Wait while the movie is saved.
    Finishing...

    Personally, I prefer to split video files and remove the
    unwanted part instead of use the trim option.

    "Split a Clip in MM2.1.

    Drag the video/audio clip to the
    Timeline.

    Read the video/audio by clicking on the
    "Play" button under the display screen.

    You will see the playback indicator
    (vertical line), advancing through the
    timeline.

    Click on the button "Pause" to the point
    where you want to split and type...
    CTRL + L or click the "Split" button to the
    at the bottom of the display screen.
    (you can also make adjustments to)
    Drag the playback indicator)

    Make splits as much as you want and
    remove unwanted in law clips
    Click on / delete.

  • Fusion audio and video clip

    Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?

    richardb

    So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote

    I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.

    What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.

    I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.

    Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?

    If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.

    Please consider.

    Looking forward to hear your progress as your schedule allows.

    RTA

  • I have used Acrobat Pro DC to embed a video clip in a video and, when prompted, updated my copy of Flash Player to 17.0. Now, even if the Adobe site confirms that Flash Player 17.0 is installed and enabled on my system, the video still fails to pla

    I have used Acrobat Pro DC to embed a video clip in a video and, when prompted, updated my copy of Flash Player to 17.0. Now, even if the Adobe site confirms that Flash Player 17.0 is installed and enabled on my system, the video still does not play when I click on the Start button. Instead, I keep getting the prompt direct me to install the necessary revision of the Flash Player. Can any clarify what is happening here and I need to do to remedy this? I'm working on a system with Windows 7.

    You must install the NPAPI Flash Player (for Firefox, etc) not the plugin for Internet Explorer ActiveX plugin. Acrobat cannot use the ActiveX version.

  • Batch apply and markers on video Clips

    I have a series of about 100 clips to quickly throw in Premiere Pro and export as file combined on a regular basis. However, I would like to apply a short (0.5 second) cross dissolve (audio and video) between all clips, including a fade in and out on the clips of the first and the last.

    The problem with creating a sequence of all clips and trying to apply the cross audio and video dissolves at all (using the sequence-> apply default Transitions) is that I don't have and markers on clips, so transitions do not work.

    Is there a method of batch brand-ins application and breaks mark on each clip of my project to 15 images in and 15 frames before the end of EACH clip?

    For starters, I entered in preferences and video and audio transitions by default value 15 frames/0.5 second.  I have also tried to cut a clip to the desired length, copy the clip, paste the attributes on another clip, but that did not apply for the brand of component snap and brand.

    Any help would be greatly appreciated. Thank you!

    Take a look to automate to sequence.

  • New problem/bug when I put in and out of the points on a clip. Auto zoom unwanted in clip timeline.

    Game clips for log and set the scenes and out points I'll use later.  Something has changed with the new update and I think it's a bug.  When I hit the I and the keys O to set points on a clip before you drag the sequence, he zoomed in on the scenario of the clip.  I don't see the time line full clip unless I have to zoom out which is a pain at the time and repeatedly.  How can I get this back to how it was before?  It did not used to zoom in and out, it just marked your entry and exit point as he played leaving unchanged clip timeline.

    I use windows 7 with first Pro CC

    Hello

    Thanks for your post. I think you are using Premiere pro CS6 as the project option is included in the file menu and in the video there is an option of the project available and visible. Please update your CS6 with 6.0.5 last updated and the problem will be corrected. The link is provided below. Please update once the issue is resolved.

    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5631

    Kind regards

    Vinay

Maybe you are looking for