Buttons radio in the html page generated by cgi script has stopped working after update for Firefox 4 (from 3.6.16).

Similar Questions

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Windows Vista 32 SP2. Can't open images "in the error Page" says that Windows Explorer has stopped working. Hard drive works after that tasks are more.

  CPU is 1.5 GB dual Intel processors

  get a blue screen with same error a few times, especially when on the internet

  Hello

  1 have you tried the methods mentioned in the post above?

  Please get back with the results so we can help you better.

  Method 1: You can also configure your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Also I suggest you to see the link below, which will help you solve the stop (blue screen) errors in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Some of the steps in the link remains valid for Windows Vista as well)

  Hope this information is useful.

• Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working.

  Original title: the task bar icons

  Several months ago the button, if that's what it's called, the task bar that displays hidden icons has stopped working. Can I get a virtual device driver format in the registry is incorrect when you use a disk with the drivers on this subject. I found information on how to correct this problem and now the botton of task bar work again although it works until the computer is used for a while. How is the hidden icon button suppose to work or it should be visible all the time? Also the virtual device driver registry entry has something to do with it? I think that the problem of the DMV has installed a Norton program antivirus software that was on a disc that came with the computer.

  Hello

  1 have had any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

   

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• The predictive text on my iphone 4S has stopped working even though I turned on. Help?

  The predictive text on my iphone 4S has stopped working even though I turned on. Help?

  Greetings Emmyneo,

  It seems that the predictive text on your iPhone stop of work not at all. Is this correct?

  First thing I would suggest would be to turn off predictive text, and then turn it back on again. The place to do this is in settings > keyboard stop predictive , then press. See this help page for reference - Enter text - iPhone

  If the predictive text feature was not returned as expected, quit all running applications and try again.

  Force an app to close the iOS

  If the problem is still present, restart the iPhone-

  Restart your iPhone, iPad or iPod touch

  Thank you for using communities of Apple Support.

  Be well.

• My Lightroom worked the perfect time, but today when I start the program I get a message "Lightroom has stopped working".

  My Lightroom work all the perfect time, but now when I start the program I get a message "Lightroom has stopped working".

  I use Windows 7 pro SP1and Photoshop and Lightroom CC. I think that it is a more recent version.

  Yes, I use the administrator account

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• AutoFit Guest stopped working after update the VMWare Tools

  I've updated Workstation version 8 to 10.  I had several virtual machines of Windows 7 x 64 I then updated with the latest VMWare tools (v9.6.1.1378637).  Now, one of the virtual machines will not automatically resize correctly.  (Three other virtual machines with the same o/s resize correctly and with Windows Server 2008 resizes correctly.)  Workstation is set to Autosize > Autofit guest.  The resized correctly VM before VMWare Tools has been updated.  In other words, the auto resizing feature worked for the virtual machine within the 10 workstation when the previous version of VMWare Tools was installed.  Upgrade VMWare Tools triggered behavior.  When I use the 'Fit Guest Now' view of the virtual machine command flashes but does not resize.  When the my computer window is resized, the prompt is not resized.

  I tried the following:

  • Uninstalled and reinstalled VMWare tools.
  • Confirmed VMWare Tools (vmtoolsd.exe) is set to start automatically and runs.
  • Changed the display of the virtual machine settings to a custom resolution and then to 'host to use setting for monitors '.
  • Attempted to change the resolution of the guest, but he won't go high 1920 x 1440 (it should be set to 2556 x 1496 based on the resolution of the other virtual machines that resize correctly).

  Thanks for your suggestions!

  Update of material compatibility on the virtual machine to which auto resize has stopped working has helped auto resize again.  Hardware compatibility was 6, 5-7.x.  I've updated to be compatible with 10.

  The question remains as to why three other similar virtual machines (with the same compatibility level of 6, 5-7.x) should not be updated so that the automatic resizing to work.

  I didn't want to answer my own question but hope this helps people who have encountered this particular problem.

• button to open the html page

  OK, so I am putting together my portfolio and I want people to see my images larger than what is on my site. So I thought, it's to make the picture a button and do a window of html (a popup) to see the larger version. Is the right way to do it or is there a better sugguestions? If this way is a good way can you let me know how to do this? This is my first flash site, if you want to check it out I have an almost complete version on web emoney
  
  Thanks, Erik

  ejsmojo wrote:
  > okay so I am putting together my portfolio and I want people to see my pictures
  > larger than what is on my site. So what I thought is to make the image a
  > button and open a window of html (a popup) to see the larger version. Is
  > this the right way to do it or there at - it a better sugguestions there? If
  > this way is a good way can you let me know how to do this? It's my first
  > flash site, if you want to check it out I have an almost full on version
  > http://www.emoneydesigns.com web

  It's a good approach, you can stick to it. I wouldn't do it otherwise.
  To open pre-set you need this kind of action related to the pop-up button:

  on (release) {}
  getURL ("javascript:n_name = window.open ('image.html', 'window1', 'width = 350, height = 250'); void (0); ») ;
  }

  Suggest placing the image in the HTML page, you can set the Nice title for her. If you go the
  JPG directly, it displays a path of ugly to the file on the server.
  Second, the name of window1 mind. Use another name for each link, otherwise happy you
  opens in the same window.

  --
  Best regards

  Urami

  --

  The beauty is in the eye of the beer holder...

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

  I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

  Hello

  • Have you tried the suggestions of Imran M in other post?

  You can view these methods:

  Method 1:

  Temporarily disable UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:
  I recommend the clean boot and try to run the program.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Explorer Windows has stopped working. Same for the Task Manager.

  I have Windows Vista and have had this computer for several years.

  I tried to work on something yesterday and I found that all my Office 2007 programs would be would break immediately at the opening, while they were working fine a week ago (the last time we used them).  I ran the diagnostic program came not upward with anything and then installed a bunch of windows updates I received automatically.  When the computer restarts now, I get a window in the corner that says 'Custom settings', then a window appears and says that Windows Explorer has stopped working.  I can ctrl/alt/del and open Manager tasks, but when I try to do no matter what to whom, it also stops working.  I not to download anything so I really don't think it is a virus.

  I can't open programs or menus, even if I think I can get a screen of command.  I ran all the tests in the installation disc and did not get any where or the other.

  If anyone can help, I would really appreciate it.

  Thank you

  Mike

  I can show you a workaround until Microsoft fixes their problem.

  As soon as you enter the office hit

  1-CTRL/ALT/DEL to get into the Task Manager
  2. click on the tab Applications (top left corner)
  3. click the new button on the task (lower right corner)
  4. in the Open box, type explore and click the Enter key
  5 do step 3 and 4 once more as quickly as possible

  This should stop the process of recycling the error message

  After stops in the process recycling, you can leave the Task Manager and minimize the Explorer window.  Also, you should be able to leave the Task Manager and windows Explorer now.  If this is not the case, just keep the Explorer minimized window.

  You should now be able to use your computer as usual.

  Let me know how it works for you.  If it works well, spread the word.

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot open the control panel and workstation - "Windows Explorer has stopped working"

  Original title - I can't open my computer or control panel.

  I try to open my computer or control panel so I can uninstall something I think that may have caused a problem. When I try to do so, a window opens saying "Windows Explorer has stopped working". I don't know what to do. I think it was some game, I installed recently which caused this.

  Restart your computer in safe mode by pressing F8 just before windows logo appears after intervention by the bios. And see if you can open my computer or control for safe mode. If you then uninstall the program/game where you doubt. also run msconfig and remove startup programs that you do not use frequently and do not trust. Also if you have recently added a toolbar or of any custom theme and then disable it. then reboot in normal mode and see if the problem persists. It will be useful.

  Good luck!

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]