Buttons stopped working!

Similar Questions

• new tab button stop working

  Since yesterday the new tab button stop working. I tried clicking on the + as usual but nothing happens. It lights up blue when I click but nothing else. So, I tried via file, new tab but also Ctrl + t.
  I tried to restart and update too.

  The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Uninstall this extension.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Satellite A300 - 15K - 2 media buttons stopped working

  Hello.

  I have a problem, the first 2 of my multimedia buttons stopped working...
  I tried to uninstall several times but it didn't help.

  I also have nothing to choose in the list in

  Toshiba Assist-> optimize-> Toshiba Button Support.

  I need help. (there were 2 posts before).

  Hello guys

  Can you please stop crying here, and perhaps tell us what the problem is here?

  Expensive J3... what you are writing about. What operating system do you use? What drivers? What kind of error?
  Multimedia keys are not controlled by drivers. What is - that you already tried?

  Hay metalbullet, the same questions for you - what order, what OS? Sorry, but you didn't offer any relevant information.

  Have you tried with this VAP suggested by Akuma?

• ThinkPad Bluetooth Laser Mouse buttons stop working

  My ThinkPad Bluetooth Laser Mouse is a great device, except that very often the buttons stop working; for example, I can click the close X at the top right of a window and nothing happens. I found that cross all possible button clicks, including failover of the scroll wheel, will get running again. My assessment is that the software Lenovo mouse Suite merges very often on the State of the mouse buttons; for example, software problem, not a hardware problem. Frequency is approximately 1 event in 20 hours of use. What must I do to get help?

  Windows 7 x 64 with all updates

  ThinkPad X 220 with built-in Bluetooth

  Mouse Suite Lenovo: 6.47 (upgrade to 6,48)

  UPDATE: just had to happen once again (still ongoing: 6,47). I tried a lot of things with the mouse and the only thing that solved the problem was to tilt the mouse wheel (first to the left then to the right).

  UPDATE: I recently had the left and right tilt scroll wheel assigned to respectively backward and forward, and I don't remember having this problem before I did these assignments, so I changed both of these assignments to disabled to see if that makes a difference. I've also updated the Mouse Suite version 6.48 software.

  

  For further investigation:

  100% reproducible failure

  When I opened Firefox 11.0 with only one tab, the window control icons (Minimize, Maximize, Close) would correctly highlight on mouseover and works correctly when you click on it. When I then open or switch to another tab, there was no highlight on mouseover and is no longer, they responded to clicks. Other actions of the mouse work properly, including the icons of window control in other apps I tested.

  I uninstalled then reinstalled Firefox 11.0, define a new profile is empty, and the problem persisted. I checked for other reports of this problem in Firefox, and while I found a (very) few similar reports, I found that there was no evidence a general problem in Firefox.

  Successful correction

  I uninstalled ThinkPad Bluetooth Laser Mouse, mouse, Lenovo, ThinkPad UltraNav Utility, ThinkPad UltraNav Driver and rebooted, installed just the TrackPoint with the Microsoft Compatible PS/2 driver, and the problem does not recur. I think only installed two UltraNav packages with system update, then the Lenovo ThinkPad Bluetooth Laser Mouse with mouse Suite, and the problem still does not happen. It continues to operate correctly.

  My assessment

  My assessment is that something subtle had screwed up in Lenovo UltraNav and/or mouse Suite, which has been fixed by uninstalling and then reinstalling everything. I don't think that there is a problem in Firefox.

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT

• Qosmio F50-111: control buttons stopped working using VMWARE Workstation

  Hello

  Since I've installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media library, next, previous, updated muted and light webcam and dolby) stopped working.

  So I chose Restore my Vista before installing on my VMWARE of ve. It works again my buttons work...

  BUT I need to install this software (vmware) for my use of employment.

  I've tried remove and install then new value-added Package from Toshiba Web site, but it does not work.

  Please help me

  This means that applications (in TBS folder, such as TDspBtn.exe, TBSbtnSt.exe,...) start running, but stops immediately.

  Thank you for coming to help

  Here the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=181231

  + After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). +
  + Clear hook and restart. After the reboot, the buttons should be working. +

• Toshiba control buttons stopped working on Satellite

  "turn off the lights" and "windows media player" media buttons no longer work...
  They did a couple of days. Not sure why they stopped working.

  When I open media player manually, the * play/pause, stop, previous / next buttons * work, just the * LEDs power switch * and * media player * buttons don't.
  If anyone has had the same problem or knows how to solve this problem, would be very grateful if you could let me know...

  Thank you!!!

  Hello

  > If anyone has had the same problem or knows how to solve this problem, would be very grateful if you could let me know...
  Why you n t search in the forum for questions and similar problems?
  There are a lot of threads!

  Just a tip; you need to reinstall VAP

• Control buttons stopped working

  Hi all

  This is not an important thing, just a pain in the ass and when something is supposed to work I love it to!

  Anyway, the four buttons on the left of the keyboard - internet, Media Player, stop, play etc have stopped working for some reason any.

  Any ideas?

  Thank you

  Liam

  Hello Liam

  Always cela for some reason comments. ;)
  First try to make back the OS to an earlier time using System Restore tool. Maybe solves this problem on an easier and faster way.

  Good luck!

• Tecra M4: Rotation button stopped working

  The spin button (the one in the middle of 3 buttons on the screen) stopped working. It always works as ESC key is not a problem of hd. I would like to know exactly which driver is responsible for managing this kind of behavior, then I'll try to reinstall.

  Please

  Hello

  As far as I know that the TOSHIBA Tablet PC button driver is responsible for the good working of the ESC/Rotation order and key function Cross.

• Satellite A660-1FM - function buttons stopped working

  Hello

  The glowing function ceased buttons on my A660-1FM worked, except the volume control those. In addition, the button on the touchpad that turns off the power also stopped working.

  I tried to reinstall the Value Pack, but this made no difference. The impact of this is that I can't turn on wireless more!
  Anyone got any ideas?

  I want to restore to factory, I had to do this once already when this new laptop refused to stop. I don't want to spend all my time to reinstall applications from scratch every month :)

  See you soon
  Andy

  Hi Khaled,

  Did you also remove the old version of the package of added value before you install the latest version? It would therefore be important if you didn t do try again!

  Since when have you noticed the problem?
  You can try to restore the system to a previous point. If it s just a driver problem the system restore will help you.

  By the way: also check the BIOS! There you can also toggle the buttons illuminated.

• Equium A60 media buttons stopped working

  I don't know what I've done, but all of a sudden my button of media on top of my keyboard stopped working. I reinstalled the Console and controls, and now the Internet Launch button works but not the buttons play/stop/etc with Media Player.
  Help, please

  Go to the control panel and select the application of controls of Toshiba.
  Here, you must select the MediaApps tab.
  Please check if the command audio CD and DVD video control options are defined.

• Qosmio X 770 - 11 c - function buttons stopped working

  function keys have stopped working - unknown reason because no special actions not completed - pc recover function used to a known point that the buttons were ok - no results - last PPV installed 1.5.15.64 - no results - 1.70 BIOS is installed

  What happens when you reboot your laptop?
  You can use these buttons again?

• The USB headset volume buttons stopped working

  Let's see if a second go make me somewhere...

  I have the Travelite ASUS HS-1000w headset. It is compatible with all versions of Windows. I got this headset special for about two weeks before the volume buttons stopped to change the volume.

  It is plug-and-play 'driver for free', so there is no update driver for him - I checked. It is always set as the default audio device to use when it is plugged. I don't have any Intelli-products (IntelliType, IntelliPoint; someone has suggested that there could be a conflict).

  It worked with no problems whatsoever until one day, I restarted my laptop and ONLY stopped volume keys their functions for an unknown reason. It is not the USB port; change ports makes no difference. It is not the helmet; the buttons work when tested with other computers, PC and Mac. Nothing has been installed during the session before rebooting, not even the updates of Windows.

  Still the volume buttons still don't move the volume slider. I have tried everything I can think of, including uninstalling the driver/restart/connect the headphones back in and let him make his case. My last stations are making a Win7 repair install and if this does not work, reinstall Win7 entirely. But, as we can guess, I don't want to have to basically EVERYTHING (200 + concerts) reinstall on my computer just to get one thing working again which, at this rate and based on past with her, events cannot be guaranteed to stay work again for much longer after that.

  What REALLY bothers me is that seems to be the only person on the planet who is having that kind of question.

  How can I get these buttons work again if it's something on my computer that affects their? If anyone has any clue that could help me somehow, I'll give you $ 1 billion.

  (Well, not really, but darnit, I'm DESPERATE!)

  Hi Tyberious,

  Please see the post below with a similar problem:

  http://VIP.ASUS.com/Forum/view.aspx?board_id=21&model=HS-1000W&ID=20100306223646109&page=1&SLanguage=en-us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• All my buttons stopped working, and I have no error codes or anything: s

  So I work in an iOS app using Adobe flash pro cs6 and I had all my btn from the framework, the background layer, so the inclinometer never disappear is so the layer that contains the code for these 3 buttons (back, Menu, Next) as3 layer and the layer background n buttons have a keyframe under 2 until frame 100 with no other keyframes... so I decided to add a menu right in the first image (1) with 3 buttons plus (work in reality completely all 3) and I noticed that when I remove the codes Connectionwithsuchprocedures a (Menu buttons), the 3 other buttons start working, if I have the code again, then the 3 buttons is the two frame stop working, here are my codes:

  The three buttons on the menu (the work one, but when I delete the code other highlight function)

  / * import flash.events.MouseEvent;

  Stop();

  chapt_sel.addEventListener (MouseEvent.CLICK, ChapterSelect);

  inst_btn.addEventListener (MouseEvent.CLICK, Instructions);

  abt_btn.addEventListener (MouseEvent.CLICK, AboutME);

  function ChapterSelect(evt:MouseEvent): void {}

  gotoAndStop (5);

  }

  function of the Instructions (e:MouseEvent): void {}

  gotoAndStop (2);

  }

  function AboutME(a:MouseEvent): void {}

  gotoAndStop (15);

  }*/

  as you can see has the / * / to close the code so that the other buttons not working

  and here's the code for the non-working one, unless I close the code above:

  import flash.events.MouseEvent;

  Stop();

  N other EventListeners

  menu_btn.addEventListener (MouseEvent.CLICK, menuFunc);

  next_btn.addEventListener (MouseEvent.CLICK, nextFunc);

  back_btn.addEventListener (MouseEvent.CLICK, backFunc);

  Variables

  Functions

  function backFunc(evt:MouseEvent):void

  {

  var invalidFrameNumbers:Array = new Array (1, 5, 11, 13);

  var validPress:Boolean = true;

  for (var i: int = 0; i < invalidFrameNumbers.length; i ++)

  {

  If (invalidFrameNumbers [i] is this.currentFrame)

  {

  validPress = false;

  break;

  }

  }

  If (validPress)

  {

  prevFrame();

  }

  }

  function nextFunc(e:MouseEvent):void

  {

  var invalidFrames:Array = new Array (5, 12);

  var validPress:Boolean = true;

  for (var i: int = 0; i < invalidFrames.length; i ++)

  {

  trace ("check if invalidFrame [" + invalidFrames [i] + "] == [' + this.currentFrame + ']'");

  If (invalidFrames [i] is this.currentFrame)

  {

  trace ('Invalid frame matched, invalid press');

  validPress = false;

  break;

  }

  }

  If (validPress)

  {

  trace ("no invalid image detected nextFrame() running '");

  nextFrame();

  }

  }

  function menuFunc(a:MouseEvent): void {}

  gotoAndStop (1);

  }

  Please help: s

  for non visible:

  menu_btn. Visible = false;

  next_btn. Visible = false;

  back_btn. Visible = false;

  to make visible (the default setting unless the code like this is running):

  menu_btn. Visible = true;

  next_btn. Visible = true;

  back_btn. Visible = true;

• Buttons stop working after pressing the other buttons

  I have three buttons and when I click on the other, the first stops working (for example, no trace event and he traced back to the frame 'tab1'), but the third is still working. Then, when I press the third button the two first and second is no longer working. If I take the stop lines, buttons work fine. The following frames were simply stops on them.

  B1.addEventListener (MouseEvent.MOUSE_UP, b1Pressed);
  B2.addEventListener (MouseEvent.MOUSE_UP, b2Pressed);
  B3.addEventListener (MouseEvent.MOUSE_UP, b3Pressed);

  function b1Pressed(event:MouseEvent) {}
  trace ("hurry b1");
  gotoAndStop ("tab1");
  }

  function b2Pressed(event:MouseEvent) {}
  trace ("hurry b2");
  gotoAndStop ("tab2");
  }

  function b3Pressed(event:MouseEvent) {}
  trace ("hurry b3");
  gotoAndStop ("tab3");
  }

  Is there something obvious that I'm missing?

  Thanks for the ideas.

  Scott

  Check following things:

  1. All three buttons are available on all chassis. [tab1, tab2, tab3]
  2. There is no key between the two images.
  3. If there are key frames are of course you have buttons on the separate layer where there is no frames keys from the beginning to the end.
  4. If you have to have keyframes for the buttons then assign the event listener once more on each keyframe. [as when you insert a keyframe, gets a new bifurcation place]