NFS Carbon does not start in Windows XP a black screen and hangs

Similar Questions

• X 1 carbon does not start after Windows Update.

  Hello

  It was a yes I work on this X 1 computer laptop carbon and no default value.

  I had a windows update yesterday, I did it and my computer turns off naturally.

  This morning, I can not start it, it starts up fine, Lenovo sign appear but nothing after. only a black screen with blinking underscore.

  Any ideas?

  Thanks for your help.

  Hello

  Thanks for your help, but I already did that and no results. I call the warnaty Center and they change the card mother and ssd. so I lost all my files... they told me that they can save them...

  Now, I received a laptop cool but cannot be used because the SSD is not empty, no part of recovery and they gave me a cd of installation still... 2 weeks without a computer for my CEO with all files down... really painful.

  I close the topic, thanks for your help tho.

  Kind regards.

• My Mac mini end of 2012 does not start: stuck at the total black screen

  Thus,.

  I tried to install Windows 8 with bootcamp using a USB key. It did not work ("" can not do a new partition on this disk or some * like that "") but this, I'm sure that has not affected my install OS X, I've never been format the Bootcamp partition.

  So, I leave the Windows installation program, reboot and remove the USB key. Now, I get the black screen that OSX shows when it has no OS, giving me the impression that he wiped / corrupted installation.

  Very well...

  But there is a twist. I can not hold option to join the boot device selector, nor can I press CMD + R or retrieve internet. Metal target does not work. I have reset the NVRAM successfully a few times, but it start always black.

  I am using a wired keyboard and mouse. I tried to use external SuperDrive with a CD player. As well as USB. I'm lost and I'm an experienced technician, and I admit that I am an iSheep. Then Yes.

  Thank you.

  (And I didn't get any update of third party other than an SSD, which worked well for centuries)

  EDIT: and I reset the SMC EDIT 2: I know also that this probably isn't a hardware problem, I am positive my OS X install and the OS X recovery partition are corrupt. I don't understand why I can't hold option, and I don't understand why the recovery of the internet does not work when you have no recovery partition. I would be grateful if I could start anything, without having to open my Mac.

  Do you get a startup chime?

  Unplug everything except KB/monitor / power and try to start with the command + R and press the Option key.

  If still problem dismantle the Mac and disconnect the internal disks and try again

  Try reinstalling the memory

  Try an another KB

• Computer does not start properly, shows only a black screen

  When I turn on my computer, my home page is not upward.  She's just standing on a black page.  Someone can help me.  It also only allows me to reset or clean.

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my computer does not start when turned on a black screen monitor

  Computer most of the time will light up all the way and the screen remains black. If I push the power button on the monitor, you can see briefly what the screen should look like through the dark.

  What should I do to fix this?  I have Windows XP Professional

  Hi TraciLucia,

  ·         You receive an error when starting?

  ·         You see the desktop behind the black screen icons?

  Try the following.

  Method 1: Start the computer in safe mode and check the number. Report of the results.

  Method 2: Check to see if this article helps you.

  Computer stops responding with a black screen when you start Windows XP

• Final Fantasy VII for PC does not work, it will launch a black screen and then stay there.

  I installed Final Fantasy VII, I applied the patch 1.4, I tried all compatibility modes, but the program still not stop responding to a black screen.

  I made a blog that compiles things necessary to the execution of Final Fantasy VII on Vista/7
  http://deadaimgames.spaces.live.com/blog/CNS! 23D808D5C5803715! 427.entry

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Windows Defender service does not start on Windows 7

  On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
  I can't remove Defender another upodate no longer works.

  Someone knows a solution?

  Hello

  Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

  In addition, you can read about trouble of Windows defender:

  http://support.Microsoft.com/kb/931849

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• HP-P7-1026 b: Desktop does not start on Windows 10.

  Desktop computer does not start after reboot. Windows 10 message PREPARING AUTO REPAIR leads to next screen CHOOSE YOUR KEYBOARD LAYOUT and freezes / disables keyboard and mouse.

  Virus ISVProgramme can do so many things, do not rely on them. Also, why buy a new hard drive! Yours is still perfectly fine. I guess staples suggested, to avoid dupes. If you want a new hard drive. Your recovery disk should work as well as your old hard drive like new.
  Do not open e-mails that you are suspicious. One click and they own a computer.
  Good luck.

• t460p does not start after windows birthday 10 update of 1607

  Hi, please help

  I had a birthday windows 10 update of 1607

  It inexplicable the pc, and the screen went black for more than half an hour.

  Now, my t460p will not start any longer, he stops on the red square of lenovo, sensor power print, button and finger are lightning,

  I don't come to a bios, pressing ENTER while booting does nothing.

  How can I boot my laptop?

  Thanks for the help!

  In response to the reports of the Lenovo ThinkPad systems client does not start with a screen as expected after the upgrade for the update of Windows 10 anniversary, Lenovo has provided a workaround solution.

  A TRICK of Service has been made available here: https://support.lenovo.com/us/en/solutions/SF16-T0077

  Thank you