By aligning an entire table in regards to the margins?

Similar Questions

• Updated scoreboard celled without redrawing the entire table

  I have a program that uses a Table hint. Each line is a step program and in the same row, there is a countdown indicating the time remaining.

  Update the remaining length of cell is easy enough to help replace the subset of table (is there a better way?) but whenever I do it looks like LabView redraws the entire table on the screen, and this causes the annoying flashing-flashing of text in the table.

  I reduced the updates to 500mS and that "works", but there are still some flashes and 500mS reduces the precision of the synchronization.

  Is it possible to update a single cell on a table hint without redrading the entire table?

  Tables, always teetering.

  Try to drop a decoration above it, the value transparent border/fill. I remember that, with my field engineer, back in LV 8.5 and ending up in the incredibly annoying time discussing.

  I think that not fair to say he'd be only even partially covering it to remove the flicker of screen refresh.

  Edit - in fact, I * think * he has to cover even the label of the table to delete a part.

• Title, title, line-Align multi-column Tables

  File under: trouble Frame, with a little hacky work-around

  In the format of two columns we work routinely, we often need a table that is on the scale of the column, but maybe take in several columns.

  The problem is that the title suite (TableTitle, if used) and never align with the departure of position/title. That's because continuations are starting at the top of the column, while the table itself begins (default "Anywhere") under the anchor line (supposed to be 'in the column' for this discussion)...

  OK, what happens if we change Table > start [Basic] table designer to:

  • Top of the column: Oops, which becomes the top of the Next column, leaving the anchor text column-widower (but it gave me an idea).
  • Top of the Page: Oops, who becomes top of the Next page, leaving the anchor text page-widowed.
  • Float: no effect

  OK, what happens if we change the anchor text Format > paragraph > Format by Designer [paging] to:

  • [Paging] in all of the columns (AAC): Oops, table appears only in the left column on all pages, or;
  • Spacing between lines, including negative and space [base] values seems to have no effect. Using a tiny police only minimizes the problem and he's not healing.

  I thought that I had found how to solve this problem at some point, but did not remember it. I'm writing this in part to seek a simpler solution. Web research has found only one candidate, solid solution, and it was, of course, 404. Perhaps chassis versions have at least the FM7/Win and FM7.1/Unix that I regularly use improvements to this address.

  We normally just to work around the problem by using an AAC format and a table that spans the page, with a gutter of fake Center, simulating a stream of multiple column. In a recent case, I wanted a real wide single-column table of length variable (due to the conditional lines and expected future growth), but I wanted the items to align columns. The table raised on one page, which is a limitation of the next cut.

  Hack: This example requires a text block and page 2-column normal which is 7.5 in wide with a gutter in 0.24 (3.63 in. columns) and a table do not require more than one page. It works for both the provisions 3 and 4 columns.

  1. Use an AAC anchored text frame line.
  2. Create a frame of width (7.5 in.) anchored full page (which may be low, the top of the pass, as you wish).
  3. Create a block of text inside the anchored frame. This framework is:
     one more than your standard page (3-column for this example)
     Same size gutter (0.24 in. for this example).
     Initially pull the block of text to fit inside the frame anchored, so you can get it easily.
  4. Make sure that the default paragraph format (anchored table) of the first column is "in the column".
  5. Use graphics > properties of the object to set the text block inside:
     The value of width: your total width of the text frame standard most 1 column and 1 gutter (11,37 in. for this example).
  
  Set Offsets: from 0 to 0 (this will push the column at the right out of sight for the moment).
• Insert your table as soon as the text table anchored inside the text frame.
• In the table designer, the value Start: top of the column (this pushes the table beginning in column 2).
• Select the internal text block again.
  The value offset: left: negative column + a gutter (in-3,87 for this example).
• Now, the table seems to start in the page one column and flows to the additional columns with the alignment of the position.

It worked perfectly for my recent requirement. In fact, I used a 3 columns (4 real) for the block of text inside the anchored frame. A bit of math is required, sorry .



> ... a table and column that spans more than one column...

> Not quite--I have a table of unique, equal or less than a wide column column,
> flowing (continuous) in several columns.

That's what I meant... but misspelled "covers" instead of "flow".  Oops... I just noticed a mistake. To the step #2, I said give a table a value space above 12.0 pt. There should be a negative space above (pt-12,00).

Above is an example of a view of what I get.

• Alignment of data table in DW CS4 problem

  Hello

  I have created a website in the DW CS4. I'm trying to align my table I created for my contact form. I got it as I want with the exception of a slight problem: my "submit" button is not lining up with the rest of the form elements. I don't know how to add my HTML here. If you guys can tell me I'll add it. Thank you very much!

  FOR INFO:

  I thought that if I add < td align = "right" > and then alternate the next with < td align = "left" > element and returns it in the < tr > tag that would position the elements slightly to the right of left justified.

  ashmic19

  I don't know how to add my HTML here. If you guys can tell me I'll add it.

  Publish your page some temporary webspace and then post a link here.

• Right align page numbers which is found to the left of the table of contents entries

  I posted a similar question a while ago I think that substances or Peter replied, but darn if I can find the thread. At that time, they provided a script that does a GREP search, find a sentence that starts with a number and its replacement by a tab. I still have the script, but for some reason, it does not properly with my new table of contents page layout. It must insert a tab on the left page number (page numbers are to the left table of contents entries) and force the numbers right aligned so that a single-digit right page number aligns with the right edge of a two-digit page number.

  Find: ^ (\d+)
  Change to the: \t$1

  What is happening in the new table of contents, this is the script is a figure and inserts a tab to the left of the page number. Page numbers are moving to the right, but they do not align right. They are further to the right, but they themselves numbers correspond to the left.

  I'm puzzled as to why the script does not work on this new layout. Now I use CS4 and it still works on the former route. Nothing terribly different about the new layout except that the column is much closer, and there are several columns threaded in the TOC instead of a long column and the chapter titles do not have page numbers (but all other entries have page numbers.)

  We should probably set the tabulator in your paragraph style: a tab aligned right for the numbers, followed by a tab stop that is aligned to the left to the text that follows this number. (I guess that there is a tab after the number.)

  Peter

• SQL profile will be lost after we recreate entire table?

  Hi people!
  
  Scenario:
  We have introduced by Sql Setup SQL profile and implemented since within the grid control in our database 10 g on a particular table.
  That forces the profile Sql optimizer oracle to use a base complete index instead of table scan function.
  
  A question is:
  This Sql profile will be lost if we do one of the following scenarios:
  1. recreate all the indexes on this table
  2. or we do Expdp, delete the table and then create a new and Impdp (export and import) that table?
  3. we rename the table and all indexes and then rename indexes and vice versa?
  
  Sql profile will disappear above scenarios?
  
  Any comments would be much appreciated.
  
  Bravo!

  That forces the profile Sql optimizer oracle to use a base complete index instead of table scan function.
  A question is:
  This Sql profile will be lost if we do one of the following scenarios:
  1. recreate all the indexes on this table
  2. or we do Expdp, delete the table and then create a new and Impdp (export and import) that table?
  3. we rename the table and all indexes and then rename indexes and vice versa?

  Hello

  Although I have not tested, but I think that there will be no impact on the profiles and it will stay there.
  Because unlike objects, a profile in SQL Statistics is mapped to an application, not an object or objects.
  You can see the SQL Profiler created in the view of the DBA_SQL_PROFILES dictionary. The SQL_TEXT column indicates the statement SQL profile has been attributed to; the STATUS column indicates whether the profile is enabled

  Kind regards
  Rajesh

• Adding an html comment causes an entire table to disappear in CC Design view

  Do some settings on a page in the html editor in DW CC and by adding a simple comment <! - BEGIN HAND TABLE - > causes vast below table to disappear in the design view.  But the html code is still there in the html editor and the page is displayed correctly in a browser. Refresh Design view does nothing. At first, I kept Undo'ing it back to where I was before adding the comment. Then I thought that maybe if I saved the doc after the comment it refresh properly, but it didn't. Do not help quit and restart DW.

  What gives? The Design Bulletin Board is now gone.  I can't work like this, without seeing the page I'm working on that...

  I can do this same thing happen over and over - which seems to indicate a bug in DW CC...

  I know that you are pro anti-tables, but I'm stuck with tables right now...

  It turns out that the changes were fairly simple, there was just a bunch of them (missingandtags for most). Try this code instead of your-

  http://www.murraytestsite.com/forum1b.html

• JDeveloper 11.1.2.3: In regard to the contextual events, af:inputtext, af:table

  adf newbie question fast 11g...
  
  While passing by a nice tutorial on http://www.youtube.com/watch?v=IFl-1RQm_so & feature = plcp Frank, I decided to search with the wizard for creating contextual events. What I noticed that the type of the event produced changes was based on the type of parent (pure!) component.
  
  Dialog contextual event for an af:inputText nested in an af:table
  http://i.imgur.com/uy0Xh.jpg
  
  Dialog contextual event for a stand-alone af:inputText
  http://i.imgur.com/SXsXQ.jpg
  
  The switchable contextual event to ValueChangeEvent for an af:inputText in an af:table type?
  
  Thank you
  
  -Wes

  Wes,

  in fact when I reproduce with 11.1.1.6 then change value event is created for the event popup I create for a text entry field in a table. I guess you always focus on the table when you create the popup event. Check the Lady of PageDef. If you see the event under the binding of the tree, then I'm right.

  Frank

• Addition of constraint without checking on the entire table

  Oracle 11.0.1.7:
  
  I'm trying under DDL. This table contains rows of 100 M and adding constraints takes a long time. Is it possible to add the constraint without checking for every former or current lines? Since I add new column and activation of constraint on this subject, I know that I can safely ignore the previous lines and search for violations. I just want to allow this control for new lines. How can I add such that it ends in no time.
  

  ALTER TABLE TRAND_F ADD TRAND_ID Number(19,0); --This is super fast
  
  ALTER TABLE TRAND_F ADD CONSTRAINT FK_TRAND_ID FOREIGN KEY (TRAND_ID) REFERENCES TRAND (SUBMISSION_ID); --this takes a long time and causes waits on other transactions

  You want to use the constraint condition clause "ENABLE NOVALIDATE"
  The SQL language reference States:
  "ACTIVATE NOVALIDATE ensures that all new DML operations on limited data are consistent with the constraint. This clause does not guarantee that the existing data in the table is consistent with the constraint. »

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10592/clauses002.htm#i1002273

• Center aligning images in table using the XML file

  Hello
  I use a flash file that uses an xml file to download a series of images one by one in a photo-gate.
  There are two different widths of images. The height is always the same. Is it possible to set up so that each image that calls file xml is center aligned as part of image.
  At the present time when using the xml file to load the image she always left aligns the image when he brings it in image even if you change the alignment to center align in the Panel align.
  Does anyone have a suggestion why this happens or how to fix it?
  Thanks for the help

  I did this quickly and did not test - but if it does not directly at the exit it might give you a starting point - or someone else can correct if there are errors. I'll check tomorrow - where I am its time to go to sleep...
  CHANGE the DETAILS: Just changed a few pieces of code I posted last night - I forgot to change the statement holder_mc.loadMovie in xml.onLoad Manager. I have not tested, but its along the lines of the approach I would use to solve your problem with resizing the image. Let me know how you go with it.

• Convert a table 1 d of the Cluster (time + data) in 2D-table time and data. How?

  Hello

  is there a simple way to convert a large table 1 d of the Cluster (containing a timestamp and a given) in a table 2D with time stamp and data?

  I could index the table in a while loop, separate each item and put the timestamps and the data in a new table.

  The format of the new table could be an array of double (then the timestamp must be converted to a double) or an array of strings.

  Could I do this without a loop?

  Johannes

  LabVIEW 7.1 (!)

  Hi Johannes,

  If it is possible to manage your time as dbl-floats stamps, I suggest using a simple loop and the cluster to function array (Cluster_to_Array_Mod1.vi).

  If you want to stay with time stamp data type, even once use a loop for a cluster unbundle and build the function array (cluster_to_array_Mod2.vi).

  Kind regards

  Thomas

• Pretreatment of an external table - table is empty at the end

  Hello

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for Solaris: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  Solaris 10 x 86

  I'm trying to create an external table that first pre-process a file and then the bed. The problem is that, in the end, the outer table is empty even if the read file is not empty.

  First, the table works gunzip on the 'employees.csv.gz' file located in/export/home/oracle/archives and then bed. The file employees.csv.gz exists in the specified location. This is the complete script:

  -This Directory keeps the archived files

  CREATE or REPLACE DIRECTORY arch_dir AS 'archives/export/home/oracle/archives";

  -This directory shows where the command gunzip

  CREATE or REPLACE the bin_dir AS DIRECTORY ' / usr/bin';

  CREATE TABLE emp_exadata

  (

  employee_id NUMBER (22, 0),

  first name VARCHAR2 (20).

  last_name VARCHAR2 (25).

  e-mail VARCHAR2 (25).

  Phone_Number VARCHAR2 (20).

  hire_date DATE,

  job_id VARCHAR2 (10),

  higher wages (22: 2),

  commission_pct NUMBER 22 (2)

  manager_id NUMBER (22, 0),

  department_id NUMBER (22, 0)

  )

  EXTERNAL ORGANIZATION

  (

  TYPE oracle_loader

  Arch_dir default DIRECTORY

  ACCESS SETTINGS

  (

  RECORDS delimited BY NEWLINE

  preprocessor bin_dir: "gunzip".

  end fields BY «»

  missing field VALUES are NULL

  (

  employe_id,

  first name,

  last_name,

  E-mail

  Phone_Number,

  hire_date CHAR date_format DATE mask "dd-mm-yyyy hh24:mi:ss."

  job_id,

  salary,

  commission_pct,

  manager_id,

  department_id

  )

  )

  LOCATION ("employees_exp.csv.gz")

  )

  REJECT LIMIT UNLIMITED;

  When I choose to emp_exadata the result set is empty!

  SELECT * FROM emp_exadata;

  no selected line
  

  When I look at the db server in the directory /export/home/oracle/archives I see no archived file employees_exp.csv. Here is the result of the first three lines:

  
  

  bash - $3.2-3 employees_exp.csv head

  198, Donald, Ollivier, DOCONNEL, 650.507.9833, 21/06/2007 00:00:00, SH_CLERK, 2600, 124, 50,.

  199, Douglas, grant, DGRANT, 650.507.9844, 2008-01-13 00:00:00, SH_CLERK, 2600, 124, 50,.

  200 Jennifer Whalen, JWHALEN 515.123.4444, 17/09/2003 00:00:00, AD_ASST, 4400, 101, 10.

  The end of the lines in the file line is LF (unix style). The encoding is in ANSI format.

  I tried to experiment around, but cannot view records when I select in the external table. Please help me to solve it.

  I also register the generated log file:

  LOG file opened at 01/06/15 16:40:11

  For table EMP_EXADATA field definitions

  Record format DELIMITED BY newline

  Data in file have same "endianness" as platform

  Rows with all null fields are accepted

  Fields of the Data Source:

  EMPLOYEE_ID CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  FIRST NAME CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  LAST_NAME CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  EMAIL CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  PHONE_NUMBER CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  HIRE_DATE TANK (19)

  Day DATE data type, date mask dd-mm-yyyy hh24:mi:ss

  Completed by «,»

  Trim whitespace same as SQL Loader

  JOB_ID CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  SALARY CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  COMMISSION_PCT CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  MANAGER_ID CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  DEPARTMENT_ID CHAR (255)

  Completed by «,»

  Trim whitespace same as SQL Loader

  You need to carefully examine the description of the PREPROCESSOR option in the chapter of the manual external Tables utility.

  The first point that applies to your question is that the preprocessor must write its data transformed to stdout. To do this with gunzip, you use the - c command line parameter. The second point that applies to your case, in view of the answer to the first point, is that you must write a script shell if your preprocessor requires command line settings.

  Kind regards

  Bob

• Obligation to fill the values in table advanced according to the selection of a value in another article of lov (not in the advanced table)

  Hi all

  We work in a custom oaf page subdivision. We have an obligation to fill the values in table advanced based on a value selection in an element of the lov (this LOV is not in the advanced table) .can share you it please me steps or examples of code to achieve this. Waiting for response.

  Kind regards

  I do not understand completely still. What do you mean by "default in the table values must be inserted".

  You can create a dummy VO with the same columns and fix the VO in the advanced table.

  In the normal scenario, when the user clicks on submit button, browse this VO, and copy the values to the validation according to VO and appeal EO. If values gets inserted into the database.

  When the user selects the number of PO, simply run the other VO and fill this dummy VO so that values are available in the advanced table. When you click on send, do not copy these values to the EO based VO, so these lines won't get inserted.

  It work?

  See you soon

  AJ

• Old table plan can degrade the performance of SQL in refreshed environment?

  Hello

  We have a copy of the production which is only 2 days. A query that works well in the COP, but having the problem of possible performance if the Production. The statistics are updated. One thing while getting the plan explain I have Plan of Table is old in the test (cop).

  What is this old table surface and it can affect the difference in performance for the same query?

  Data in both environments are almost equal. Let me know if you have any necessary clarification from my side.

  -Regads,

  J_DBA

  Hi Nikolai,

  Thanks for your help. I was just checking my old posts and saw that it is not closed. This problem has been resolved.

  Table plan was not causing the problem, it was happening because of a JOB that used to run obsolete statistics sometimes together work finished Prod. Who the hell a lot of insertions/deletions. And once again made the stale stat for 2 tables in this application (tables 8 and 9 was in total).  That was causing the problem. and explain the plan is different in the two aspects, where these two paintings have been obtained.

  When this was addressed, it has solved the problem and Yes sql profile has also helped in this case.

  Thank you

  -Best regards,.

  J_DBA_Sourav

• EBS Tables with columns of the report from the olive TREE relationship.

  Hi friends,
  
  We try to find the required Tables of EBS for the tables of the HR module report below. Please find the tables in the query of the OBI.
  
  
  *************************************
  
  Select sum (case when T91397.) GROUP_ACCOUNT_NUM = "EXP CONT" then case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) in c1.
  sum (case when T91397.) GROUP_ACCOUNT_NUM = "EMP SUPP" then case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) C2.
  sum (case when T91397.) GROUP_ACCOUNT_NUM in ('GEN PAY', "MKTG PAY", "R & D on the PAYROLL", "SLS PAYROLL") then the case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) as c3.
  sum (case when T91397.) GROUP_ACCOUNT_NUM = "EMP BENFT" then case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) as c4.
  sum (case when T91397.) GROUP_ACCOUNT_NUM = "GEAR" then case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) as c5.
  sum (case when T91397.) GROUP_ACCOUNT_NUM = 'RECIPES' then case when T91707. OTHER_DOC_AMT is null then 0 T91707 else. OTHER_DOC_AMT * T91707. GLOBAL1_EXCHANGE_RATE end else 0) as c6,.
  T66755. PER_NAME_MONTH as c7
  Of
  
  W_DAY_D T66755 / * Dim_W_DAY_D_Common * /,.
  W_GL_ACCOUNT_D T91397 / * Dim_W_GL_ACCOUNT_D * /,.
  W_GL_OTHER_F T91707 / * Fact_W_GL_OTHER_F * /,.
  W_STATUS_D T96094 / * Dim_W_STATUS_D_Generic * /,.
  W_MCAL_DAY_D T300914 / * Dim_W_MCAL_DAY_D_Ent * /.
  
  where (T66755. ROW_WID = T300914. MCAL_DAY_DT_WID and T66755. PER_NAME_YEAR = '2009' and T91397. ROW_WID = T91707.GL_ACCOUNT_WID and T91707. DOC_STATUS_WID = T96094. ROW_WID and T91707. DELETE_FLG = ' n and T91707. ACCT_PERIOD_END_DT_WID = T300914. ROW_WID and (T96094. W_STATUS_CODE in ("DETACHED", "REVERSED")))
  Group of T66755. PER_NAME_MONTH
  
  *********************************************
  
  Select sum (case when T299373.) W_EMPLOYMENT_STAT_CODE = 'A' then T299423. NUMBER 0 if not end) as c1,.
  sum (T299423. STAFF) C2.
  T100027. PER_NAME_MONTH as c3
  Of
  
  W_MONTH_D T100027 / * Dim_W_MONTH_D * /,.
  W_EMPLOYMENT_STAT_CAT_D T299373 / * Dim_W_EMPLOYMENT_STAT_CAT_D * /,.
  W_WRKFC_BAL_A T299423 / * Fact_Agg_W_WRKFC_BAL_A * /.
  
  where (T100027. ROW_WID = T299423. SNAPSHOT_MONTH_WID and T100027. PER_NAME_YEAR = '2009' and T299373. ROW_WID = T299423. EMPLOYMENT_STAT_CAT_WID and T299423. CAL_MONTH_START_DT < = TO_DATE ('2013-05-01 00:00:00 ',' YYYY-MM-DD HH24:MI:SS')))
  Group of T100027. PER_NAME_MONT
  
  *********************************************
  
  Of course, if we can pass through as:
  
  OLIVIER <-Infa PLP <-Infa SILOS <-Infa SDE <-SDE Mappletes <-Source qualifier <-Sql query.
  
  We get the number of tables for table unique obi. But it takes only the required tables for requests above OBI for one report.
  
  Please correct me if wrong and guide me with the best approach...
  
  Thanks in advance... Enjoy your entries here.
  
  Best regards
  Raghu Jen7782
  
  Published by: Jen7782 on May 1, 2013 Rambaud 05:30
  
  Published by: Jen7782 on May 1, 2013 Rambaud 05:31

  Your approach is correct. This being the fact table, you can't wait for a single table as source.
  http://docs.Oracle.com/CD/E10783_01/doc/bi.79/e10742/anyimp_configfinance.htm#CHDJHHDH

  Check if help

  Thank you