By comparing the fields on a JSPX

Similar Questions

• compare the fields of two queries

  I need to compare the fields of two queries.
  
  I went through many articles to asktom help operator less. but I'm not convinced by this method.
  
  Comaprisons are for about 10 fields.
  
  So I'm planing to do using sliders and nested loops. performance can be a problem.
  
  Please give your suggestions or solutions.

  OK, using the data you provided, I get this:

  with map_test_fac as (select 100 idid, 789 ifid, 300 edid, 741 efid from dual union all
                        select 100 idid, 123 ifid, 300 edid, 963 efid from dual union all
                        select 100 idid, 456 ifid, 300 edid, 258 efid from dual),
           test_fac as (select 741 facid, 'ETY' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all
                        select 789 facid, 'WE' type, 'EUR' ccy, 'Int' src, 100 did from dual union all
                        select 123 facid, 'VPR' type, 'EUR' ccy, 'Int' src, 100 did from dual union all
                        select 456 facid, 'ETY' type, 'USD' ccy, 'Int' src, 100 did from dual union all
                        select 963 facid, 'WE' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all
                        select 258 facid, 'VPR' type, 'EUR' ccy, 'Ext' src, 300 did from dual)
  -- end of mimicking your data: USE SQL below:
  select tfi.facid int_facid,
         tfi.type int_type,
         tfi.ccy int_ccy,
         tfi.src int_src,
         tfi.did int_did,
         tfe.facid ext_facid,
         tfe.type ext_type,
         tfe.ccy ext_ccy,
         tfe.src ext_src,
         tfe.did ext_did
  from   test_fac tfi,
         test_fac tfe,
         map_test_fac mtf
  where  mtf.ifid = tfi.facid
  and    mtf.efid = tfe.facid
  and    mtf.idid = tfi.did
  and    mtf.edid = tfe.did
  and    (tfi.type != tfe.type
          or tfi.ccy != tfe.ccy)
  
   INT_FACID INT INT INT    INT_DID  EXT_FACID EXT EXT EXT    EXT_DID
  ---------- --- --- --- ---------- ---------- --- --- --- ----------
         789 WE  EUR Int        100        741 ETY EUR Ext        300
         123 VPR EUR Int        100        963 WE  EUR Ext        300
         456 ETY USD Int        100        258 VPR EUR Ext        300
  

  However, I think that your mapping data is incorrect, so with keys of information:

  with map_test_fac as (select 100 idid, 789 ifid, 300 edid, 963 efid from dual union all
                        select 100 idid, 123 ifid, 300 edid, 258 efid from dual union all
                        select 100 idid, 456 ifid, 300 edid, 741 efid from dual),
           test_fac as (select 741 facid, 'ETY' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all
                        select 789 facid, 'WE' type, 'EUR' ccy, 'Int' src, 100 did from dual union all
                        select 123 facid, 'VPR' type, 'EUR' ccy, 'Int' src, 100 did from dual union all
                        select 456 facid, 'ETY' type, 'USD' ccy, 'Int' src, 100 did from dual union all
                        select 963 facid, 'WE' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all
                        select 258 facid, 'VPR' type, 'EUR' ccy, 'Ext' src, 300 did from dual)
  -- end of mimicking your data: USE SQL below:
  select tfi.facid int_facid,
         tfi.type int_type,
         tfi.ccy int_ccy,
         tfi.src int_src,
         tfi.did int_did,
         tfe.facid ext_facid,
         tfe.type ext_type,
         tfe.ccy ext_ccy,
         tfe.src ext_src,
         tfe.did ext_did
  from   test_fac tfi,
         test_fac tfe,
         map_test_fac mtf
  where  mtf.ifid = tfi.facid
  and    mtf.efid = tfe.facid
  and    mtf.idid = tfi.did
  and    mtf.edid = tfe.did
  and    (tfi.type != tfe.type
          or tfi.ccy != tfe.ccy)
  
   INT_FACID INT INT INT    INT_DID  EXT_FACID EXT EXT EXT    EXT_DID
  ---------- --- --- --- ---------- ---------- --- --- --- ----------
         456 ETY USD Int        100        741 ETY EUR Ext        300
  

  That's more like what you're looking for?

• When comparing the fields status, title or banner buried on the body of the screen?

  When you have a screen and you have the added fields to the body as well as the status bar, I wonder when that gets buried on? What is the sequence of events?

  During the positioning of the body.

• iDoc Script to compare the metadata

  Scenario:

  Customers has a workflow approvers reviewers are selected when check-in, metadata and metadata xRevisors, xApprovers, is the list of multiple options and a table users view. But, the author, reviewer, and approver cannot be the same person. I create an iDoc Script to check for this, in the first step of the workflow:

  < $if author as "xRevisors" or dDocAuthor as 'xApprovers' or xRevisors like $ "xApprovers" >

  < $wfSet ("wfJumpName", "Check_participantes") $>

  < $wfSet ("wfJumpTargetStep", "contribution@HmbGgqDocQualidade") $>

  < $wfSet ("wfJumpEntryNotifyOff", "0") $>

  < $wfSet ("wfJumpMessage", "author, reviewer, and approver cannot be the same person.") ") $>

  < $endif$ >

  This work when I choose as a reviewer or an approver, but stand them sometimes more than one person and that's my problem, xRevisors and xApprovers metadata save more than one user, then author as reviewer or approver compare it is false. How to make the script check this?

  Or just convert the strings separated by commas results (<$rsMakeFromString$>) and loop games result sets.  This should be fairly simple.

  On another note, I see even where this line of code would work.

  <$if author="" like="" "xrevisors"="" or="" ddocauthor="" like="" "xapprovers"="" or="" xrevisors="" like="" "xapprovers"$="">-It's not comparing the fields, he compares a literal string, namely "is the value of the author as the word"xRevisors "?  How does this even in the first place?

• It is possible to compare the contact fields based on the value of data updated?

  Hi all -

  I would like to run a filter and compare my contact fields if the value in a field has been updated or changed.

  for example if the data in the "first name" value changes to be empty to have a value, which would respect the requirement.  Also if "phone number" 123-456-7890 to 999-000-0000 that would also meet the requirement.

  Did anyone done this before?  Any ideas of how to implement?

  Any contribution is appreciated.  Thank you!

  If that's what you're talking about, there is no trace of audit in Eloqua.

  It will be great if Oracle can verify the critical fields.

  The solution is to create to the top of the field in another area, so when it changes, you can compare the values.

  Good luck

• By comparing the dynamic fields of objects using equals and hashCode methods

  To compare the different objects of the same class with their content as jobTitleId, classificationId, deptId & classificationId had to be done and do a few steps later, using Set and the map. I was able to do it by simple substitution of equals and hashCode methods of the object class and was able to read the information (as in the map below).

  Map < LocationData, list < LocationData > >

  The following is the class I used (its been shown you so that it can be called for my problem statement):

  Class LocationData

  package com.astreait.bulkloader;

  public class LocationData {}

  String locId, deptId, jobTitleId, classificationId;

  @Override

  public boolean equals (Object obj) {}

  LocationData ld = (LocationData) obj;

  return this.deptId.equals (ld.deptId) & & this.jobTitleId.equals (ld.jobTitleId) & & this.classificationId.equals (ld.classificationId) & &

  this.locId.equals (ld.locId);

  }

  @Override

  public int hashCode() {}

  return deptId.hashCode () + jobTitleId.hashCode () + classificationId.hashCode () + locId.hashCode ();

  }

  }

  Problem:

  I am already known to which all the fields of this object, I need to make the comparison.

  IE I have to use the variables named classificationId, deptId, jobTitleId & locId etc.

  Need:

  I need to customize this logic such as names (classificationId, deptId, jobTitleId & locId etc.) fields can be learned, dynamically, as well as their values. So, as far as I understand, I've made use of 2 classes (TableClass and ColWithData), such as the list of the ColWithData is there in the TableClass object.

  I think what will happen if I substitute the same two methods "equals() and hashCode();"

  as the same thing is possible.

  TableClass class #1

  Class TableClass {}

  The list < ColWithData > cwdList;

  @Override

  public boolean equals (Object obj) {}

  Return Boolean = false;

  I need to have the logic must be set such that

  all dynamic fields can be compared

  return return;

  }

  @Override

  public int hashCode() {}

  Return int = 0;

  I need to have the logic must be set such that

  All dynamic fields for their individual codes can be found

  return return;

  }

  }

  ColWithData class #2

  Class ColWithData {}

  Pass the string; Here, the jobTitleId, classificationId, deptId, locId or any other information fields more may come.

  String data; The corresponding data or value for each jobTitleId, classificationId, deptId, locId or any other more fields.

  }

  Please let me know if I'm the procedure in the right direction or should I do a different approach. If it is allowed to use the current approach then what should be done to equals and hashCode methods?

  Finally, I need to make the map as: (is not worried how I give you, but may be considered my goal sought this logic)

  Map < TableClass, list < TableClass > > finalMap;

  I'm sorry for that. Although the problem is resolved, on my side.

• compare the 4 fields in a table

  Hi, today my brain pains, can someone please tell me how to compare 4 fields in a table to see if they are all equal?
  

  create table dm_test (n_1 number,
  n_2 number,
  n_3 number,
  n_4 number);

  INSERT INTO dm_test
       (n_1,
        n_2,
        n_3,
        n_4)
  VALUES
       (1,
        1,
        1,
        1);
       
   INSERT INTO dm_test
       (n_1,
        n_2,
        n_3,
        n_4)
  VALUES
       (3,
        2,
        2,
        2);
           
    INSERT INTO dm_test
       (n_1,
        n_2,
        n_3,
        n_4)
  VALUES
       (0,
        0,
        0,
        3);
          

  The result of my query must return only
  first row
  1 1 1 1
  
  Thanks people...

  Maybe something like that?

  SQL> SELECT  *
    2  FROM    dm_test
    3  WHERE   n_1 = n_2
    4  AND     n_2 = n_3
    5  AND     n_3 = n_4
    6  /
  
                   N_1                  N_2                  N_3                  N_4
  -------------------- -------------------- -------------------- --------------------
                     1                    1                    1                    1
  

  It won't however if you're concerned about NULL values. Do you want a row to return if they are NULL?

  EDIT:

  The version that supports the NULL:

  SQL> INSERT INTO dm_test VALUES(NULL,NULL,NULL,NULL);
  
  1 row created.
  
  SQL> SET NULL '(null)'
  
  SQL> SELECT  *
    2  FROM    dm_test
    3  WHERE   NVL(n_1,-1) = NVL(n_2,-1)
    4  AND     NVL(n_2,-1) = NVL(n_3,-1)
    5  AND     NVL(n_3,-1) = NVL(n_4,-1)
    6  /
  
                   N_1                  N_2                  N_3                  N_4
  -------------------- -------------------- -------------------- --------------------
                     1                    1                    1                    1
  (null)               (null)               (null)               (null)
  

  Edited by: Centinul May 14, 2010 07:07

• How to make the field 'Description' biggest area? (3 to 4 lines in height compared to the present 1 line)

  I'm guessing that in CSS or HTML in the Editor of Landing Page I can do form field seems bigger than just the single line. Ideally, I would like to than the text about 3 to 4 rows height box.

  Please help me solve this problem! Means the simplest would be the best, but I'll take any answer at this stage.

  Thanks Topliners community!

  Figured out that you go to "Custom Fields" then hit paragraph box and replace the HTML name, as well as card in the stages of treatment, in the field "Description". PM me if you want more details and this has been a concern for you as well.

• Compare the text of the combobox as a condition in the calculation of the field another.

  I'm doing a condition, if one of the 15 comboboxes has a certain value of selected text list, then a button is displayed.

  I tried to follow this example, which I found here on another question:

  var t = document.getElementById ("fTerminalType");

  selectedText var = t.options [t.selectedIndex] .text;

  the part of my code that uses it is:

  for (i = 1; i < 16; i ++) {}

  var t = this.getField ("ComboBox" + i);

  var s = t.options [t.selectedIndex] .text;

  If (s == 'Specific text') {}

  k.Display = display.visible;

  }

  }

  "Combobox1" so has "A specific text" selected, but the "k" key does not appear visible, and the rest of the code (a calculation) returns empty.

  If I delete the internal code of "for () {}", the rest of the calculation works, if the syntax error is specific to the part of text comparison.

  I tried 'value', ".innerHTML", ". export.value", '.change' and '.changeEx' instead of '.text', nothing has worked.

  I don't know if pdf forms have jQuery, I could try it but that he would need assistance with the code so be it.

  Thank you.

  The value property returns the value of export of the selected item if it has one, otherwise it returns what appears, which is what you call text. SO if someone type something, you can retrieve it with the value property, even though you really better to use valueAsString. Check the console JavaScript (Ctrl + J) to see if errors are reported.

  If you need to get the value of the export value display, you can use the field currentValueIndices property to get the index of the selected item and use it with the field getItemAt method to get the display value. A code example is the Acrobat JavaScript reference.

  I don't notice anything wrong with your script updated, if you add a break after the k.display statement statement, since you do not need to keep a loop once it is set. Unclear if it is initialized to display.hidden somehow, what would make sense.

• In an Adobe form I need the value of Field3 to display the higher of the two fields, Field1 value or Field2 (compare the value of Field1 and Field2 and display the highest amount in field3) can someone please tell me the script to run this simple comparis

  I have 2 fields that are calculated fields and I need display the higher value of the 2 fields in a third field

  The field names must be in double - quotes. And if you change the value of any field, now, you will see error messages in the console.

• In FF password manager (30.0), when you open change, what are all the fields and how you fill them?

  When you open Edit, there are two choices: Web form and annotated.
  What is the difference?

  Then, there are fields for the host, submit the prefix, username, password, etc.
  How to fill out these fields?

  When you click for the Manager "assumes that of the current Page", all fields not necessarily fill up, so it's just for the username and password?
  I use constantly editing function, so it's a little strange to not see that further instructions here.

  When I click on tools, the saved password dialog box is on the list, so it's in my toolbar all the time.
  I use it constantly.

  What is the last password security? I know there are competitors of ideas. What is Mozilla?

  Thank you.

  Personally, I do not record the connections site in Firefox. The FireFTP extension records the FTP connections, so I use a master password to protect the people.

  I know I should finally pass a manager based password on a cloud, because if often, I forgot my login and have to reset, but... I have not bypassed by comparing the features and tests.

• How can I customize the template of Contacts to include the fields of my choice?

  I have my contacts in an excel file and intend to import contacts into a CSV file. No problem. But Contacts model uses a lot of fields I don't need (such as Pager) and I see no way to customize more compared to what I need.  I want change, not the mapping of the fields to the options in the default template. In Contacts, in the view drop-down list, choose the folder to view the details. The selection becomes a column header and can be used as a filter. It seems to be more than 100 selections.  How to use these matach to a field in the Contact model? Example: 'Product name' is one of the details (column header) I choose, but there is no corresponding information in the Contact model, 'Product name' isn't one of the choices when mapping fields during import.

  Wrong forum.
  Ask here:
  http://answers.Microsoft.com/en-us/Office/Forum/Excel

• invalid do not repaint the field?

  I have an extended RichTextField and want to change the font color on a certain event. I am able to get the event, but when you call the method of point culminating my domain color is not being updated.

  My code fields:

  public void paint (Graphics g) {}

  if (highlighted) {

  g.setColor (Color.WHITE);

  } else {}

  g.setColor (0 x 818181);

  }

  Super.paint (g);

  }

  public Sub {point culminating (Boolean isHighlighted)

  Highlight = isHighlighted.

  this. invalidate();

  }

  How to force paint it? I thought that this is done by invalidating the field?

  The field is added to a table view, as shown in http://supportforums.blackberry.com/t5/Java-Development/highlight-field-when-row-in-table-is-selecte...

  well the only way I found was to use the extent TableController.navigationMovement which REMOVES and ADDS the line with highlightet label field. I wasn't able to deal with this without add/remove lines...

  It is not nice but works now. Speed is normal, no difference compared to before. Since it is a vector in the end, and we work with index numbers, it is fast enough for the GUI.

  If you find that another way please let me know!

• Compare two fields in Eloqua API

  Is it possible to compare two fields Eloqua in the searchQuery of the Eloqua API calls in c# for example. searchQuery = "C_DateModified = C_DateCreated"?

  Unfortunately, this can not be done.

• Segment-&gt; compare Contact fields-&gt; value

  Hey,.

  Try to set up a block to compare the Contact fields in a Segment.  You want to check the value of a field is one of the two values (data source are a drop-down list in SFDC).  I put the criteria "to be defined", which then provides a bunch of games to choose from.  None of these default settings work for me, so where do I go to create new sets?

  Hi Jeremy,.

  The option "to define" will check if a contact field contains a value in a list of selection.  You can create new lists of selection in the Setup > fields & views > Setup > manage select lists.  From there, you change the values in existing selection lists or create new ones.  Selection lists can be created either by entering the values manually, either by downloading a CSV values.