By error format & partition of my laptop HP 2000 Windows 8.1

Similar Questions

• Laptop HP 2000: windows 10 keeps restarting

  First time here, can be bad so sorry advice. I have a laptop HP 2000 with SP1 and all the installed updates downloaded windows 10 and installed Windows 7. Now, lights up for a few minutes then restarts several times. I reinstalled windows 7 and new updates downloaded windows 10 and installed again, the same thing happens. Not computer smart, so thanks for any help.

  Found the solution. Use media creation tool.  http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10. Follow the instructions. Download the right software-32-bit or 64-bit. Use the flash drive, it is faster. Be sure to remove or uninstall all unnecessary elements. Basket empty. Disable all the steps needed to start.

  Installed at 10 EARN about 2 hours ago, so far, works very well. This is maybe two or three hours to install. Be patient, seems to weigh sometimes but as I said be patient and it will continue. May need to reinstall certain things (printer, another browser, etc.).

  I hope this helps.

• I provide an error of syntax on my laptop sony vaio windows 7 and it stops wireless connection.

  After a few minutes of being on and available Wi - Fi connection, the led goes out and the internet will disappear. The syntax error is as follows.

  Syntax: delay

  I have never seen it before. I think that it is the cause of the problem.

  The answers would be great.

  Joe

  A few things to try...

  1. Start in safe mode with network and see if the problem occurs...
  2. Perform a clean boot and see if you can identify the problem...
  3. Run the System File Checker tool and see if you have a file corrupt (s)...

• laptop HP 2000: 2000 Hp notebook pc system off [64776786]

  Laptop HP 2000
  Windows 10

  @JoErl

  In this case, enter 71653308

  Kind regards

  DP - K

• I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message: "syntax error:"D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. " MAN. "

  I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message.  one of the components that windows needs to continue Setup could not be installed. Manifest Parse Error: an invalid character was found in text content. Connect the system configuration error: SXS. DLL:syntax error in manifest or policy file "D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. MAN 'at line 0. I bought the oem software installation disc. I bought the computer used and did not get any disk with it. Help, please

  1 person got this response
  Shawn thought it was bad media so I'm a new disc and received the same error does anyone have an idea what might cause this error?

  original title: install windows xp

  Hi sptusch,

  Thanks for posting. Is it a burned disc? If this is you please redownload the image. Also, try the following.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• 4 primary partitions on my laptop

  I want to install linux on my laptop, but there are already 4 primary partitions on the hard drive (max because it turns out that). As far as I know the main account recovery partition, correct me if I'm wrong, please. Discs, 4 partitions management function are the following:

  1.46 GB - Healthy (active, recovery Partition) 100% free space
  561.99 Go - Healthy (start, page file, crash dump, primary Partition) 12% free space
  21.09 Go - Healthy (Primary Partition) 100% free space
  11.26 GB - Healthy (Primary Partition) 100% free space

  What I can find on the forums around the internet, 21 and 11 GB are supposed to be the partitions toshiba recovery has done for windows and it is software.

  Why are the scores of recovery 100% empty, I can understand that for a ++ active partition recovery but...?
  If these two partitions are partitions of recovery Toshiba, which is for windows and which is for the software?
  If these two partitions are partitions Toshiba Recovery, will be one work without the other (I would like to format the partition containing the backup software)?
  Why are the big scores? (default Windows 7 family is only 6 GB, and there is no way that the software is 11 GB)
  If you're not Toshiba recovery partitions, what are these two partitions?

  Otherwise, no matter what other suggestions?

  Initially, it will be useful to know what model laptop do you have, what operating system do you use and do you always use original Toshiba operating system.
  Because partitions recovery methods different image installation structure on old A300 or new A660 is completely different is not easy to say what is right or what is wrong.

  Structure of the partitions listed in disk management is a bit strange for me and on my notebooks with original Toshiba OS it looks completely different.
  In General, you need to track: start the preinstalled operating system (factory settings) and create recovery DVDs using Toshiba recovery disc creator pre-installed too. After having done that, you can do with your computer laptop all you want.

  Note please. When you change the structure of the original partitions, install own OS or change anything, that you will not be able to launch the installation of HARD drive recovery and install Windows using recovery partitions. Then please create recovery DVDs before you change anything.

  Back to your questions:
  > Why are the recovery partitions 100% empty, I can understand that for active recovery partition, but...?
  To be honest I n don't know why this is shown as empty. Toshiba recovery image is a large file and, as far as I know, he is not divided and placed in two different partitions.
  > If these two partitions are partitions of recovery Toshiba, which is for windows and which is for the software?
  Recovery don t image consists of two parts.
  > If these two partitions are partitions Toshiba Recovery, will be one work without the other (I would like to format the partition containing the backup software)?
  I understand your question, but recovery image is not designed into two separate parts. There is an article and can not be changed or manipulated.
  > Why are so big partitions? (default Windows 7 family is only 6 GB, and there is no way that the software is 11 GB)
  Good question. Unfortunately I n t have good answer to this question.
  > If you are not partitions Toshiba Recovery, what are these two partitions?
  For better understanding model laptop post and what OS you are using. Is this original state you have with your laptop (factory settings)?

  > If not, no matter what other suggestions?
  I have already written. Create recovery DVDs and you can change what you want. Later, you can use this recovery DVDs to get factory settings again. You can use these DVD discs so often as you want and without any limitation.

• Time Machine can't see NAS to format / partitioned in El Capitan

  We have two MacBook Pro and 4 car TB WD MyBook attached to our wireless router. This disk is partitioned and used for Time Machine backups. We did not have problems with this configuration, up to yesterday, that we decided to format the disk and repartition it. We did it with my MacBook Pro which is running El Capitan (10.11.3) and the newer disk utility program. I plugged the drive locally on the laptop and he came back and said that through fine form/partitioning layout. However, I moved to the router as a NAS and went to setup Time Machine... Time Machine could not see the player. I could map the drive and write to her through 'connect to server... ". "without any problem. Even tried the thing to "map the drive on the desktop" to make it appear on the list of drives available in Time Machine. Nothing worked! I thought something may had been bad installation, or gone bad, partitioning and started... always the same results. The third time, I decided to use MacBook Pro my wife who still works Yosemite with the old "Disk Utility" program on this subject. I went through and formatted/partitioned it the same as before. However, when I hooked up like the SIN this time and the mapped drive he appeared right on Time Machine just as it should have the first time.

  Is there a problem with Time Machine, find readers NAS to format / partitioned in El Capitan? Is there a setting that needs to be changed in the new "Disk Utility" program to make it work? I'm a bit of a loss here...

  The router cannot possibly recognize a drive formatted by OS X. It uses an operating system that is totally foreign.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• JDeveloper (11.1.1.3.0) deployment problems (error: No Partitions Found)

  Hello
  
  I'm having a problem with the new version of the JDeveloper. This morning I installed and tried. That's all is OK.
  
  But I came to the need to deploy one of my BPEL Applications to an old Weblogic Server. The problem came because the new version that came out today from the weblogic server has a new structure called Partitions.
  
  Now when I'm deploying an earlier version of the weblogic server, JDeveloper keeps returning the error "No Partitions Found". How can we solve this problem without reinstalling my computer to the previous version of Weblogic and JDeveloper?
  
  Thanks in advance,
  Daniel Alves

  You say I need to have installed in my PC as many versions of JDev that versions FMW that my clients have installed?

  That's quite correct, Yes.

  At the same time, I got 6 versions of JDev + 3 versions of the OA Framework installed on my laptop, so it's certainly possible.

  John

• I recently formatted my old hp laptop compaq nc6000. and I try to install a new system of operation

  I recently formatted my old hp laptop compaq nc6000. and I try to install a new operating system windows 7. the problem is that you cannot boot from the cd it shows BOOTMGR is missing press alt + ctrl + del to restart or when it starts, it displays the press any key to boot from the overflow of memory cd THAT BOOTMGR is missing, press alt + ctrl + del to restart. What can I do I really want to use it as soon

  its not authentic I have it burned the ISO download?

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• At the start of the laptop it shows the message: error code 0 x rstrui.exe/offline:c/windows 800750057.

  Original title: error code 0 x rstrui.exe/offline:c/windows 800750057.

  everytime I turn on my laptop that is running windows vista with what happens

  Rstrui.exe/offline:c/Windows

  I tried the vista cd and also the ordering page where can I get help please

  Hi rebeccawentworth,

  1. are you able to boot to the desktop?

  Follow these methods.

  Method 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: Start the computer in last know good configuration.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3: Run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Reference:http://support.microsoft.com/kb/934540

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• How downlod window 7 after the formatted partition

  Hi I'm wrong format my window vista and I'm trying to download the new Windows 7 and I format partition of disk and partition system now when I'm trying to download Windows 7 I'm stuck where I have to choose the partition of the disk of window I can't create new please help me find the solution

  I have a new windows 7 now cd that I bought online in microsoft

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.