By getting Unattended.XML file not recognized when booting from the USB key dvd

Similar Questions

• How can I get network connection when booting from the usb key or dvd

  Computer: HP Pavilion P6-2450eo

  Secure boot disabled

  Legacy Boot enabled

  Thruogh F9 I can boot into uefi since a key USB and DVD mode, but I can't seem to program loadet network connection. I tried with 13.04 Ubuntu, Linux Mint 15 and Boot Repair - all with the same result.

  How can I get the programs get started with network connection?

  On thanks in advance!

  poul1304

  Please check that the programs (Ubuntu, Mint, Boot-Repair, etc.) that you attempt to use it, press the controller Atheros AR8161L gigabit ethernet in native mode. Not all operating systems and software are supported each otut device or the network configuration of the box. Several times, drivers must be loaded or injected into the operating system for a device working properly.

  Please send Bravo

• My product key is not accepted when booting from the recovery disc even if I use the product key supplied by the manufacturer.

  I wanted to clean up my computer so I copied the data on an external hard drive and then partitioned and formatted my hard drive is internal. I then ran the recovery CD provided when I bought the computer of Evesham Technology.  However, when I provide the product key which is glued on the case of my PC I get the message "the product Id you entered is not valid.  What should I do?

  Kind regards
  Eric

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Pavilion 500 t - not accessible when starting from CD USB key

  I am booting from a CD on my Pavilion 500 t to restore an image from a USB key.  I can boot from the CD fine, but after loading, my recovery (Ghost) software my USB key is not accessible.  Any ideas?

  Hi Steve,.

  Please report the number of HP for your PC product.

  How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers.

  You say that the ghost can not find the USB? If Yes, then try a USB 2 port.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• not able to boot from the CD

  Hello

  I bougt garage a hp lodge 17, im not able to boot from the CD drive.

  It comes with windows 8, and honestly I do not like it.

  I want to start from the CD or for some reason im not able to do.

  It comes to the laptop.

  17.3 laptop HP Pavilion e079nr 17 inch

  https://www.Amazon.com/GP/product/B00GGGIWTI/ref=oh_details_o05_s00_i00?ie=UTF8&PSC=1

  I checked on the start menu and I just change

  CD

  hard drive.

  ...

  ...

  ...

  even its not not booting to the CD

  can you help me with this?

  Hello:

  Unfortunately, I do not know why the DVD player does not appear when you disable secure boot and turn on legacy mode.

• automatic password is not recognized when I change the password, but in vain

  automatic password is not recognized when I connect in outlook express. He saw the day without obvious reason. I tried to change the password, but to no avail.    A ny comments or solutions?  Jong

  Hi Jong,

  ·         What is the full error message?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Save the password setting will no longer exist in Outlook or Outlook Express

  http://support.Microsoft.com/kb/290684

  I hope this helps.

• It is not possible to boot from the CD bootable on Satellite S5200-902

  Hello

  I have a Satellite S5200-902 and it was really good to use for me actually... Once I received a system error message and might start Windows more. Anyway... I tried to reinstall the OS, but I can't boot from the recovery CD. The CD is ok because I tried it on my other computer. I press F12 for the boot menu option it shows these items as HARD - disk drive - CD drive.

  I choose CD and nothing happens. He always tries to start from the HARD drive. I installed the Windows on the HD satellite on my other computer and it worked very well. He has installed the system but if I put the HD Toshiba Satellite does not start windows. It blocks the laptop.

  BIOS version is 1.30 and I don't know how to install and update the bios 1.8 or something on it, because I don't know how to install it without windows. I now have no idea how to go ahead?

  Can anyone here help me out please because I have no idea?
  Please someone help me ASAP because I need the laptop for work.
  Thank you

  Best regards.

  Hello

  It would be very interesting to know if you can boot from another CD, for example from the original CD of Microsoft.
  It s interesting because I would like to know if the drive of the laptop accept another CD.
  In my opinion, there is something wrong with the internal drive and so the laptop can not boot from the recovery CD.

• Trying to remove virus format hard drive - when booting from the Windows XP CD, don't teach me to press a button to proceed with the installation?

  Trying to remove virus, need to format the hard drive to remove all programs to remove the virus.  I ran several security programs which has not found a virus.  Taken at Best Buy, they ran their programs, could not detect viruses, but said there are something certainly on my system.  System is pegged almost 100% all the time, so I can't really use the pc.

  Reinstalling the operating system is usually not necessary to remove the malware, but if you're convinced that this is necessary (it is sometimes), this guide is a good:

  http://michaelstevenstech.com/cleanxpinstall.html

  (this assumes that you have the appropriate Windows XP installation CD)

  Of course, you will need to boot from the CD instead of the hard drive. This page explains that:

  http://michaelstevenstech.com/bios_manufacturer.htm

  You also need to install the hardware drivers. I hope that you have them on CD, too. If this is not the case, the web site of the manufacturer of PC should have them.

  Since a clean install wipes EVERYTHING, you should have all your data copied beforehand.

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Nikon NEF D810A "files not recognized by management of the raw format" Lightroom 5.7.1

  title says it all, Nikon D810A, NEF files are not recognized, but the NAVE of a D810 files are recognized.  On both devices firmware is 1.01.

  This device requires at least LR 6.1, so it is necessary to upgrade (79 US Dollars or equivalent), or use the free DNG Converter to convert your NEF files to DNG files that can be read by LR5.

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ORA-01821: date format not recognized when you use the format TSH:TZM model

  Hi all

  Running on the Oracle 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production database

  I guess I am missing something here... but the following SQL code raises the exception ORA-01821.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZH:TZM') as date_updated FROM DUAL;
  

  ORA-01821: date format not recognized

  01821 00000 - "date format not recognized".

  * Cause:

  * Action:

  If I change the model of TZDS or TZR time zone format... This works.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZD') as date_updated FROM DUAL;
  

  2013-09 - 04T 13: 24:16EDT

  I need to format a date in a date in the correct format with time zone for an Atom (RFC3339) feed

  for example. 2013-09 - 04T 14: 11:09 - 05:00

  I do not know why the TZH:TZM triggers the error...

  Database NLS settings have anything to do with it?

  NLS_TIME_FORMAT = HH.MI. SSXFF AM

  NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI. SSXFF AM

  NLS_TIME_TZ_FORMAT = HH.MI. SSXFF AM TZR

  NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI. SSXFF AM TZR

  Thanks for the help

  If you want to change the display format, can you use to_char with the expected format

  SELECT to_char (TO_TIMESTAMP_TZ (to_char (sysdate,' YYYY-MM-DD HH), "YYYY-MM-DD HH:MI:SSTZH:TZM"), "YYYY-MM-DD"T"HH:MI:SSTZH:TZM") t1d FROM DUAL;

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• When I Boot from my USB key to install Windows XP, it will appear not ALL my partitions to install on... Help!

  Yo yet another problem here: S recently, I copied files XP on USB and all that stuff etc... It will start fine after changing the order of boot on USB but when it asks me which partition to install on, it will say "PARTITION1 - LGUSB (3742MB)"... that's all for me, he said, even after making a new partition called "Windows XP Pro"... any help would be appreciated and I thank you guys for help :) especially when I only just registered to MS Answers... Thank you again :)

  -Program used to copy files from the installer:
  WinToFlash (New Version, beta version)
  ------------------------------------------------------------------USB Used:
  Unknown model - LG USB Flash Drive 4 GB
  -----------------------------------------------------------------
  Computer:
  Acer Aspire One D257

  Your User Guide can be downloaded here:

  http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=634394037714025697&STEP1=NetBook&Step2=aspire%20ONE&step3=AOD257&OS=all&LC=en&BC=Acer&SC=PA_7
  Once you unpack, you will have your User Guide:
  GUG_ACER_1.0_ALL_AOD257.PDF
  As you can see, there are different ways to restore your Acer. Yes, one of them involves a USB key. Please indicate what method you use.
  Note it is also a method where you would press Alt + F10 at startup (before Windows has the ability to load) to access the partition of the hard drive recovery.
  Yet once, have backed up all your data?