by using the LAG() and MIN() functions

Similar Questions

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• Firefox does not open with the tabs I had open when I use the renunciation and backup function. Firefox opens on my home page only. How to fix?

  When I use the function "Save and exit" has no effect. The next time I open Firefox it goes to my home page only.

  This has happened

  Each time Firefox opened

  Is 3 days ago

  If you use delete navigation, search and download history on Firefox in Firefox 3.5/6, or clear private data in Firefox 3 to clear the browsing history when Firefox is closed then in restaurant tabs at the last session (for example "save and exit" or "show my windows and tabs from last time ') does not work.

• OfficeJet J4660 all-in-One on Windows Server 2003 R2 - cannot use the scan and fax functionality

  Hello everyone,

  I recently purchased the Officejet J4660 AIO.  I had to install on our Windows Server 2003 R2 (with all latest updates), being present on the CD of driver for Win XP, I had to download the latest driver (OJJ4600_Corporate_ENU_10 - 55.8 MB) from the HP site.  During installation, ONLY the printer driver has been installed.  I can't use the SCAN function or the FAX software.  In fact, the icons for these two programs not created in the HP program group.  No error message appeared well while installing.

  All the world was a program similar and been able to get a work around for this?  I would like to use AIO printer that I bought, not only on the side of impression of it.

  Any help will be much appreciated.

  Thank you.

  Salim

  I think that the Acquisition of Image Windows (WIA) service is disabled in your system. Unlike Windows XP or Vista, in most Windows Server systems, this service is disabled by default. You can activate it in this way:

  1. right click on my computer and select manage.

  2. Select "Applications and Services-> Services";

  3. find Windows Image Acquisition (WIA), right click and select Properties.

  4. Select "auto" in the "Startup Type" list box in the "Général" tab

  5. in the situation 'Services', click 'start '.

• Need a formula which uses the VLOOKUP and HLOOKUP function to return a single value

  I'm creating a worksheet price with multiple values. In the table below if I select size 16 in blue the result must return 19.5

  	Red	Yellow	Blue	Green
  size
  10	5	6.25	7.5	8.75
  12	13	14.25	15.5	16.75
  14	15	16.25	17.5	18.75
  16	17	18.25	19.5	20.75
  20	19	20.25	21.5	22.75

  Hi Eric,.

  

  More large table is Table 1.

  Formula is C2 of table 2.

  C2: = INDEX (1::A1:E7, GAME table (Table a, 1::A, 0), GAME (B2, 1::1:1, 0),-l' surface index)

  Kind regards

  Barry

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• Using the Interface of FPGA functions palette

  Hello

  I use the card PCI-5640R and PXI-5600. I want to use the "scale" and "FFT" exspress screws to the range of functions 'Mathematical FPGA and analysis' in my VI "FPGA VI" and "FFT spectrum for '"FPGA interface"in my"host VI.

  A poster of the code examples in which these three subVIs are used can.

  Thanks in advance.

  Kind regards

  Rashid

  The answer to this question is available to

  http://forums.NI.com/T5/if-Rio/using-FFT-to-spectrum-SubVI-of-FPGA-interface-functions-pallete/TD-p/...

• By using the impl class for functions on a table

  I'm looking for a bit of advice on best practices.

  I have an app with 35 paintings.  I need to have a button "reset comes out" on each table.

  Each resetSort method should specify the table and the specific iterator.

  I tried to not having all the functions of 35 in the bean to support (1 for each table).

  Can I bind each table has associated feature class impl and each resetSort button call a method in this class?

  I use jdev 11.1.1.6.

  Any advice would be appreciated.

  Ray

  Then your real mission is to find the table for which the use wants to put sorting by pressing a button?

  This should be doable with the bean and a function that you bind to each of the reset buttons that you use for your tables.

  If your presentation is for the tables and the button to reset sorting, you can use an actionListener to the button. In the event of action, with the knowledge of the layout, it is easy to get to the table and once you have the table that you get the iterator from the table.

  Assuming that your tables are always surrounded by a panelCollection, who owns a toolbar now your reset button

  emptyText = "#{bindings." EmployeesView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeesView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " EmployeesView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeesView.collectionModel.makeCurrent}"="single"id ="t1">

  You can use this code actionListener

  {} public void resetSort (ActionEvent actionEvent)

  get the link container

  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  DCBindingContainer dcBindings = (DCBindingContainer) links;

  UIComponent toolbar (UIComponent) = actionEvent.getSource ();

  Try to get the source of the event table

  assuming that the button is in a toolbar of a panelCollection we get using parent.parent.children

  List of children of = toolbar.getParent () .getParent () .getChildren ();

  Table richeTableau = null;

  for (UIComponent uic: children) {}

  If (uic instanceof richeTableau) {}

  table = uic (richeTableau);

  break;

  }

  }

  If (table! = null) {}

  the model in the Collection is the object that provides the

  structured data

  for the table to render

  CollectionModel tableModel = (CollectionModel) table.getValue ();

  the purpose of the ADF that implements the CollectionModel is

  JUCtrlHierBinding. It is surrounded by the CollectionModel API

  JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding) tableModel.getWrappedData ();

  Acess the ADF, which is used with iterator

  ADF table binding

  DCIteratorBinding iterBind = adfTableBinding.getDCIteratorBinding ();

  table.queueEvent (new SortEvent (table, new ArrayList()));

  CurrentRow key = null;

  Line = iterBind.getCurrentRow ();

  If (line! = null)

  currentRow = row.getKey ();

  SC SortCriteria [] = new SortCriteria [0];

  iterBind.applySortCriteria (sc); iterBind is that the table iterator use

  iterBind.executeQuery ();

  If (currentRow! = null)

  iterBind.setCurrentRowWithKey (currentRow.toStringFormat (true));

  }

  }

  This code looks for the table of the source of the action, which is the button in the toolbar, get the tabel. Once you have the table you get the iterator from the table and reset the sort. This works as long as we find the source of the action table. If you always use the same layout for tables (for example. panelCollection > table), which is a practice of good uix, you have need of a bean to reset all tables. Simply link the toolbar button actionListner to the listener in the bean.

  Timo

• Authentication using the table and the existing database

  Very new to APEX here. In authentication methods and was curious to know if it is possible to link the Apex on an existing Oracle database and the table to get information for user name and password. Trying to use the employe_id and last 4 of their social.
  
  Any ideas or things I can read up to get a general idea?

  JosephPortello wrote:
  fac586, thank you. I didn't even know what I had done.

  Yet one thing that happens now after I corrected my incorrect syntax.

  CREATE OR REPLACE FUNCTION EmployeeIDAuth (
  p_username IN VARCHAR2,
  p_password IN VARCHAR2
  )
  RETURN BOOLEAN
  IS
  form l_count NUMBER;
  BEGIN
  SELECT COUNT(*) into l_count from table@db WHERE employee_no=p_username AND bdate=p_password;
  IF l_count > 0 THEN
  RETURN TRUE;
  ELSE
  RETURN FALSE;
  END IF;
  END; 
  

  Now returns an error of:

  Error on line 15: PLS-00103: encountered the symbol "end-of-file" when expects it one of the following values:

  not end up dominant static of final instantiable order pragma
  manufacturer membership card
  1. CREATE OR REPLACE FUNCTION EmployeeIDAuth)
  2 p_username IN VARCHAR2,
  3 p_password IN VARCHAR2

  Any other ideas?

  Remove the false token form.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.

• I can't use the tab key to move to the next field or use the shift and tab to move to the previous field in the forms.

  After update to 7.0.1 I can't always use the tab key to move to the next field or use the shift and tab key to move to the previous field in forms. He has always worked in previous versions and it is essential for my type of work. Does anyone know of a setting to enable this? If this is not the case, can the developers of Firefox is working on this issue (please). I love Firefox but desperately need this feature to work properly. Thank you!

  No - because it works in Mode safe mode, this means an extension is probably to blame. See http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes

• How can I clear the attraction of the browser to the bottom of the list, I followed the directions using the options and it will be not only clear

  How can I clear the attraction of the browser to the bottom of the list, I followed the directions using the options and it will be not only clear

  Entries in the location bar drop-down list with a yellow star (blue on Mac) at the right end of the bookmarks.
  
  You can delete this an item marked with a bookmark that appear in the list, if you open this url in a tab and click on the yellow star in the address bar.
  
  This will open the "Edit this bookmark" dialog box and you can click on the delete button to delete the bookmark if you want to delete such an entry marked with a bookmark.

  • Delete Web sites suggestions from the Awesome Bar
  • Cannot clear location bar history

• How many phone numbers can be connected simultaneously, use the most and merge buttons

  How many numbers phones can be connected at the same time, use the most and fusion of the buttons after you make the first call?

  It depends on your operator.

  It's been a few years since I've really looked into it, but I think that AT & T supports up to 5 concurrent calls. I know that other major U.S. carriers support less, but I don't remember the exact numbers. I want to say that Verizon and Sprint are in charge 3 and T-Mobile supports 2, but my memory on this subject is blurred.

  Contact your operator for more information.