DAQ Assist and the graphic representation

Similar Questions

• How can I check the voltage values on the acquisition of data with a data acquisition assistant and the custom scale?

  I use a custom scale and the DAQ assistant to acquire data from a USB DAQ device.  How can I display voltage gross values at the same time?

  Thank you

  David

  Do not use the ladder custom, but read the raw data using the daq assistant and adapts the data later. Or the scale of the data using the inverse of the custom scale.

• New Daq with the Daq Assistant in the filtering code

  Hei,

  I have a NI USB-6225 DaqMx I used a couple of years. When I started with LabVIEW, I found the Daq Assistant to the best way to measure the voltage with my Daq etc. My company has purchased another DaqMx NI USB-6225 and now I have a big problem: the Daq Assistant in my old Vi does not work with the new data acquisition. I understand why there is this problem, but I do not know how to solve. I found this code on the forum who finds that Daq is connected:

  

  The problem is that Daq Assistant do not have an entry for it, and it gives me an error if I try to run the code with a different device than the original, I used when I created the code.

  

  Is there a way to solve this, so I don't have to convert all the Assistants Daq normal code?

  Hello again,

  two options:

  (1) as the old software is related to 'Dev1' you must rename your new device to this alias and skip/rename the old device (and lack).

  (2) rewrite your old software does not become is not dependent on the name of the alias for the data acquisition card...

  It's your choice!

• Connection diagram missing in DAQ Assistant generate the signalling block

  This is my first post so please excuse the quality of my description.

  When I double click on the block of data acquisition - Assistant, there is no tab connection diagram I can access to see how things are wired to the top. I have a NI USB-6211 connected by USB and it is used to control many different sensors and a power supply. Currently, he works for everything and is hard wired correctly, but only blocks DAQ Assistant has a connection diagram available, the other are not. One who has a connection diagram is used to measure a voltage. Others who do not are used to generate a signal. I would really like to be able to see patterns of connection for each block.

  -Any help would be appreciated

  -Thank you

  You can always do like those who never use the DAQ Assistant and read the manual. Right click on the device in MAX and selecting "stitching of the device" works too.

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.

• DAQ Assistant acquires the data into segments

  I'm writing a code that reads and records the voltage, temperature and pressure on a cdaq-9174 using or 9221 and cards or 9173.  The problem is that when the daq assistant is set to N samples outputs the data blocks in the graphics.  I wish it were a continuous stream so I can see what is actually happening.  I tried to change continuously, but it gets an error or is has data about 16000 points in 10 seconds, which is a lot more that I prefer.  The code I am using is borrowed from another person and then the installation exactly it works on this computer, but not mine.  Does anyone have any suggestions on how to solve this problem.  I enclose the code as well as the sub live he uses.

  Thanks for all the help.  I didn't know at first that the NI 9237 card has a minimum sampling rate of ~ 1600 Hz.  I am now able to taste to 2000 Hz then use decimating continues to write in my file at 200 Hz.

• Second DAQ assistant in the power control system does not

  Hi all

  I need your help on this issue. I'm currently programming a VI for one command power supply for pool boiling experiments. The organizational structure of the VI program is attached.

  I use two assistants DAQ for steady-state acquisition and temperature unstable state data respectively. The first assistant DAQ (samples to read 5, 5 Hz rate) for the acquisition of works unstable state data well (see the attached image file first DAQ Assistant for acquisition of temperature unstable state). The second assistant DAQ (samples to read 12 k, 200 rate) for stationary data acquisition does not work (please see attachment image Second Assistant DAQ of steady-state temperature acquisition), showing only a series of data files size of 1 KB with no data on the inside. And indicators for steady-state data also revealed nothing.

  After a similar Q & A search in the forum, I tried to distribute different channels for 1 and DAQ assistant 2. However, the situation was almost the same.

  The material I used are chassis SCXI 1000 and SCXI 1303 Council to acquire thermal couple temperature data. Food was AMREL SPS200-50-K025. LabVIEW software is the 2014 version.

  I had just started to learn LabVIEW for only a month, and I know that the VI is a little messy. Hope you guys can also give me some advice on how to improve this VI.

  Have you looked at the error on the second daq assistant? You will see that a reserved resource error because you cannot use two different assistants. You do not mention the real DAQ hardware but there a clock unique convert. You can use only one assistant with a unique sampling frequency.

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• Satellite P10 and the graphics card driver updates

  Hello

  I'm a newbie on this forum, but let's get to the point. I have Toshiba Satellite PSP10E (PIV 2.8HT 800 Mhz, 1 GB of system memory bus speed and UNFORTUNATELY a GF 5600go...).
  My (not only) problem is that Toshiba use engineering video BIOS version and it does not have the latest drivers for the geforce series. The most up-to-date driver that really works is the last of the series 5xxx... so you can see that none of the newer games can be run with a performance on this map... because older drivers don't use really not (available at directx9.0) 2.0 pixel shader. It would not be a problem if Toshiba would give an update not only BIOS system, but also the bios video (new system BIOS contains the same old video bios.

  I really had to settle for playing games that are 2 years old? First of all pay a lot of money for a witch of the computer has enough power to run some new but don't care support Toshiba for this...

  I was the proud owner of a Toshiba laptop, but I'm not! If I had to choose again, I decide to buy computer Toshiba...
  My Question: is that Toshiba will do something with this problem? Someone knows how to help? Thanks for any help (I have not found such a problem in this forum, sorry if it has been the front sign) and sorry for my English (hope that's understandable)
  My video Bios is: v4.31.20.56.A6

  [Edited by: admin]

  Hello

  We know that you can not install the drivers downloaded from the download page of GF because of the restriction of material. It's not only the Toshiba models, but also on other producers of portable and if you visit the download page of graphics cards, it is always recommended to download drivers designed by the manufacturers of portable.

  I think that nobody can explain why it's because I'm sure you know the reason. The performance of the graphics card will always be a topic of discussion and you will always want to have maximum performance for games with laptop, although performance may not be the same as on the desktop where you have the possibility to change the graphics card and install the latest drivers.

  Because of this, I think that it is really unnecessary to some turbulence here. Believe me, you can buy what you want, but after two or three years you will be always satisfied with something.

  In any case, good luck and enjoy life!

• Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

  I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

  Hi all

  I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
  On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."
  
  Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

  You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

  I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

  Late me know please.

• Debugger and the graphics object

  I have the graphics (Graphics2D) and want to run the code in the debugger to see how the elements of the object are drawn. But I just can't.
  I can watch how the values of variables are changed, but the window, where the graph is supposed to belong is all black with nothing in it.
  
  Does anyone know why this is and if there is a way to draw step by step graphics?

  Luke wrote:

  Kaj says:
  You can call it a limitation of the Swing, but not Java. Swing is simply a graphics library, and most of the graphics libraries are truly unique threaded. Writing the user interface code would be much harder to if it is multithreaded.

  Yes, I meant actually Swing, no Java.

  I don't know what you want to do.

  Suppose I have

  g.drawLine( 0, 0, 50, 0 );
  g.drawLine( 0, 0, 0, 50 );
  

  I wanted to see how the two lines are drawn one after the other. As you step through the code.

  I don't see how you would be able to do it in a simple way. The only thing I can think is to create a new thread messages draw commands using SwingUtilities.invokeAndWait

• Want to 700-410: how install the drivers and the graphics card in a fancy 700-410 destop

  I want to install a graphics card in my computer, but I want a step by step tutorial to make sure I'm doing things. Please tell me what I'd do anything first to last

  I want to install a Zotac GTX 750 TI in my computer

  I appreciate the help,

  Thank you

  Hi there @IanSchm,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you are looking for assistance to change the video card. I'll be happy to help you.

  Here is a document for the upgrade and maintenance Guide see page 18

  I also found a YouTube video on the way to change video card, graphics card.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Satellite M70-147 - rpm and the graphics card.

  What is the number of turns of the M70 - 147?

  HTTP://BE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?LNG=10&SERVICE=BE&PROD UCT_ID = 109802 & DISC_MODEL = 0

  It is also not clear what graphics card is inside. In the header, it says:

  ATI MOBILITY RADEON X600SE with up to 128 MB of RAM or the ATI MOBILITY RADEON X 700 with up to 256 MB of RAM

  but it says in the specification:

  MOBILITY® RADEON X600SE 256 MB HyperMemory

  Thanks for your time and your answers.

  Post edited by: jerdefox

  Hello

  AFAIK the m70-147 was delivered with a 80 GB HARD drive.
  This HARD drive has the rotation of serial ATA interface and 5400 RPM of the training.
  I put t know if is it possible to use the 7200 due to heat production.
  The HARD disk with a 7200 RPM produce more heat as a 5400 RPM HARD drive.
  In this case, it is possible to s that you have an overheating problem.

  Good bye

• Pavilion 17-g127ds: upgrade of processor and the graphics card Intel

  Hello. I was wondering if I could update the processor and graphics card in the HP Pavilion g127ds 17. It has an Intel Pentium N3700 (1.6 GHz) processor. I really want to know if I could pass this processor to something better. Also, if I can improve the Intel HD Graphics, it would be good as well.

  Hello

  Unfortunately NO, you can not upgarde to better CPU or GPU because N3700 Pentium processor and Intel HD graphics card equipped motherboard. If you want to update, you must purchase a new motherborad which is = to buy the new machine.

  Kind regards

• virtualization of material assistance and the use of physical memory

  workstation6.5 use any technology hardware support? In addition, the virtual machine uses all physical memory? I find there's a .vmem file that I think it's a kind of memory for the virtual machine file. It would be even better to use the memory of phsicial, or Don't matter? I used Microsoft VPC and VMWare is new to me.

  Thanks in advance

  llvc wrote:

  workstation6.5 use any technology hardware support?

  Yes. See products VMware and hardware support for virtualization (VT-x/AMD-V).

  In addition, the virtual machine uses all physical memory?

  Yes, indeed.

  I find there's a .vmem file that I think it's a kind of memory for the virtual machine file.

  This file contains the image of the memory of a suspended virtual machine.  When a virtual machine is suspended, it uses all of the physical memory.