By using the print to print and then close a document

Similar Questions

• Why the HP Solution Center will not find the printer and then closing?

  I reinstalled the HP Solution Center Suite software for my Officejet Pro L7590 (all-in-one) on my wife's computer and was able to print but the solution center not working anymore.  Then, I connected the printer to the network and the driver/software installed on my computer.  I am able to print as well, but when I open the Solution Center it says "Products HP undetected" and then closes.  I have Windows XP Pro on two computers and before that I did a reinstall of the software on my wife's computer, everything worked well.  Where should I go from here?

  Thanks for the Document of all possible solutions.  What I found was the "Digital Imaging Monitor" wasn't not and by going to the directory C:\Program Files\HP\Document Imaging\Bin and find the run file hpqtra08.exe, clicking on that and pressing the key ENTRY, the digital imaging monitor started and the icon popped up in the projection of bar good lower program that it is running.  Once who was running, I was able to open the HP Solution Center to my scanner, etc.

  The only problem I had was when I restarted my computer, the Document Imaging Monitor does not open and the icon show up in the lower right of the bar program.  So this time I went in the directory C:\Program HP Imaging\Bin, click once on the file hpqtra08.exe , then created and right click a shortcut icon on my desktop for this run.  Now, whenever I need to use the HP Solution Center I double-click on the icon that I created that starts the digital imaging monitor and then I am able to open the HP Solution Center.

  Of course, there is a defect in the installation but I reinstalled the program 3 times without success so I'll stick with manually from the digital imaging monitor, because I know it works.

• Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

  After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

  Hi @Doug18,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

  In the meantime, try the steps in these guides:

  • Printer is offline (Windows)
  • Print jobs stuck in the print queue (Windows)

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• How Scan photos using the printer and save it in the Gallery of photos from the computer?

  Original title: scan photos

  How can I Scan photos to my printer and place then in my Gallery of photos in my computer?

  Hi Joseph,.

  Please let us know the make and model of the printer you have.

  The method of image digitization and its related settings differs from one printer to another. So, I suggest you consult articles guide you may have received with your printer when you bought. If you are unable to find all the details in the article of guide, it would be best to contact your Technical Support of the printer for assistance on this.

  You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• Is it possible to access AMX element using the AMS item ID and then update the value of the AMX?

  I created a prototype - where I need to create a static Page AMX element. I have a bean that will have a method of UPDATING: the user interaction with the element AMX fires this UPDATE method, and the method will determine the value of another node AMX. The example is as follows

  <? XML version = "1.0" encoding = "UTF-8"? >

  "< amx:view xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "Header-XXX" id = "ot1" / >

  < / amx:facet >

  "< amx:selectOneChoice label = '1' id = 'soc1" value = ""valueChangeListener ="#{SolverLogic.Update1}" > "

  "< amx:selectItem label =" "id ="si667803"value ="-1"/ >"

  < amx:selectItem label = 'O1' id = 'si667804' value="667800.667803.667804"/ >

  < amx:selectItem label = "O2" id = "si667805" value="667800.667803.667805"/ >

  < amx:selectItem label = "O3" id = "si667806" value="667800.667803.667806"/ >

  < / amx:selectOneChoice >

  "< amx:selectOneChoice label ="2"id ="soc753865"value =" ">."

  "< amx:selectItem label =" "id ="si2"value ="-1"/ >"

  < amx:selectItem label = "Ø21" id = "si753866" value="667800.753865.753866"/ >

  < amx:selectItem label = "Ø22" id = "si753867" value="667800.753865.753867"/ >

  < amx:selectItem label = "O23" id = "si753868" value="667800.753865.753868"/ >

  < / amx:selectOneChoice >

  < / amx:panelPage >

  < / amx:view >

  When the user selects 'O1' - 'SolverLogic.Update1' bean - will calculate 'Ø21' must be selected. Is there a way to access the node AMX 'amx:selectOneChoice label is '2' ' - using the ID - id = "soc753865" sound, and then set the value as "value = 'Ø21' '"

  My requirement is that I don't need a DataController object, I have a binary file that contains the business logic, what I need is to create a static page and then use business logic to determine the result of user interaction and then update the user interface accordingly.

  Thank you

  Shailendra

  There is no label but value.

  You must have the below for the value of selectonechoice:

• Hi, prob with professional vista laptop. Installed an English language pack. I can't connect to windows update, the window opens briefly and then closes, any ideas message.__any error? Thank you :-)

  no error message
  recent changes, installed vistalizator, English. German origin
  It would be much easier if I could write more than 255 characters! :-)
  Add AVG free try to help
  performed Trojan / malware scan, no problems

  He had an AVG antivirus on it originally but when I got my partner who brought it with her to the Austria I couldn't find the top program so I installed a.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  CF. http://michaelstevenstech.com/cleanxpinstall.html#steps

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My command prompt and the Task Manager opens and then closes quickly until I can read anything

  Any body guide me fast please...

  Hello

  I suggest you to follow these steps and check if that helps:
  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• CMD never opens and copy files, and then close by itself under normal circumstances?

  I played guild wars 2 and all the guest suddenly opens and then closes. a few minutes later, it opens again and copy the 2 files then closes. is this normal or part of any benevolent known subprogramme?

  Hello

  Thanks for posting in the Microsoft community.

  Of the description as I understand that the command prompt opens and closes, he opens the second time and copy the 2 files. Hope this is an accurate understanding of the issue.

  It would be useful to you to let us know a few things.

  a. What are the names of copied files?

  b. don't you make changes to the computer before the show?

  c. What is an online game or a downloaded version?

  I suggest that you run the Microsoft safety scanner and check if there is no infection by the virus.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also run the malicious software removal tool. Check out the link:

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  Note: as precautionary measure, backup important data located on your computer before you run the scans.

  Also, check with the developer of the game on this issue.

  If the problem persists then let us know so that we can provide additional steps.

   

• "Lexmark S600 Series is currently in use. Wait until the printer has finished printing and then uninstall. »

  Original title: Lexmark printer

  Hello

  Thank you for helping me to get my laptop working again - after contacting the Microsoft Community, Microsoft and my ISP, my email seems to work so I can get all my incoming messages.

  But I'm still having a problem printing.  I tried to uninstall the Lexmark S605 and I get the message error "series Lexmark S600 is currently in use.  Wait until the printer has finished printing and then uninstall. "I get this message even if the printer is turned off and unplugged.

  Before I tried to uninstall, I tried to update the drivers from the Lexmark site and it says the update was successful, but nothing prints.  Printer is no longer supported by Lexmark.  Wireless connects, but I have also tried to make it work using the USB connection.

  Printer print wireless from office, but not my laptop.

  Does anyone have an idea on how to uninstall the Lexmark program?

  Thank you

  Agnes

  Restart your computer and check the queue to printer in the Notification area, as suggested.

  Click on the printer

  Cancel all Documents

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• 2072 AND 2126 ERROR when you try to use the printer

  ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

  Hello

  1. What is the brand and model of the printer?

  2. What is the exact error message you get?

  3 when was the last time you were able to use the printer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the issue does not get resolved, then you can move on to method 2.

  Method 2:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this helps and keep us informed if you need help.

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• When you try to print the attachments I press on print and then OK, but get the message "file print".

  When I try to print an attachment, I press 'Print' and then 'OK' but then get the message @print ot file '. I thought that I would be able to print the attachment without having to do extra anthing.

  Hello

  ·         You want to print and whence? What application you are trying to print from?

  ·         Were you able to print before on the system?

  ·         What type of file you want to print?

  ·         Apart from that you can print from other applications?

  If you try to print a document from the internet then, I you suggest saving it to the desktop and then try to print and check if the problem persists.

  I suggest you return the article mentioned below, if you try to print from the internet explore.

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

• When I use the printer icon in Firefox, it is pre-set to 10 copies. How can I change this default single copy. Thanks for any information

  When I use the printer, in the upper left corner icon, it is automatically preset to 10 copies. I want only default copy. I can change it to one, but when opened, he's back to 10.

  Number of copies to print is not a parameter that Firefox is supposed to be saving, and I've never seen a preference for this in Firefox preferences panel hidden - about: config.

  Try of the reset described here and reset all the preferences for this printer:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer
  Be sure to restart Firefox before you see if doing this reset solved your problem.

  If it solves your problem, please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

  If that does not solve your problem, and defaults to always print 10 copies of everything through Firefox, please open help > troubleshooting... information and use the copy to the Clipboard and then paste this information into the box post an answer here.

  It's going to be a real long list, but all that I really need to see is the printing preferences, so you could paste all the information in a program such as WordPad text first, change the information that I can't see and then copy the remaining information and Paste only the information in the box to answer here.

  I wonder if there might be a pref I've ever seen, but I really doubt it. "Number of copies to print" has never been "stuck" for me on any program in Windows, on any PC I've ever used with any printer / print drivers.

  The only time I've ever seen a default "print dialog box" more than 1 copy has been with a working application where the program has been to force 2 copies of specific forms to print 2 copies all the time--one to give to the "subscribed" at the end of employment for their documents to the service call and one for the 'employee' obtain a signature at the end of employment with a fax in the Home Office for documentation of the task as completed successfully and for the purposes of the payroll while they would have paid for this service call.

• Deskjet F4580 - lose the USB drivers every time I use the printer

  Hello

  My Desket F4580 works well without wireless and USB, it's just every time that I plug in USB (for scanner) told me the device is not recognized, I then remove the device and then reinstall it....

  Science, not rocket, but not really acceptable either.

  To be fair, all worked fine until about 4 weeks ago, I don't know what changed and imagine that it is a problem of SYS OP rather than the printer... but if anyone has an idea (Ding!) or can help you, please please please

  Stuart

  Win 7 (64)

  Hi stuboy_spain,

  I see that whenever you reconnect the USB cable, you get the message that the "device is not recognized", when you try to scan. You must remove and readd the device to make it work again.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If you're still having problems, then take a look at this document.

  "Year error occurred while communicating with scanner ' or a"He has no connection to the computer"message when scanning.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable should not be more then 6 feet. Is the cable a cable 2.0 or 3.0

  Try another USB cable. Try a different USB port on the computer.

  You experience the same problem through the wireless connection or just the USB connection?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Is it a laptop or desktop?

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.