Bypass the "Servers" view Horizon 5.3 screen

Similar Questions

• Lead the customer view Horizon

  Hello

  I have a pool automated linked clones (Floating (high trust) that are accessible from the traditional PC configured as zero clients. The PC are shared in a lab environment. Is it possible to direct a single computer to a single VM in the pool? I tried to replace the parameter "DesktopName' in the registry with the name of a real VM rather than the name of the pool, but that did not work. View customer comes to declare that 'VM' name was not on the list of the right desktop computers. Do I need a different type of pool to do what I'm looking for? Basically, I like to take endpoint PC it would correspond with a certain VM and have this VM serve every time.

  Thank you

  You can't do that with a floating pool - you would have a self-assigned dedicated non-persistent pool so that you can specify the office.

• View horizon black screen

  Hello

  We have a working environment 6 view Horizon, and it works with view client and html. But today, I was at a customer, and when we tried my laptop, we where able to connect, but when I chose the VM, it goes to black screen and after 10-20 sec it disconnects. It must be something on the network of customers since it works from other places, and my laptop works also in other locations. I was able to use RDP, and HTML, so my question is then what do I the customer will have to check in their firewall? I thought that 'users' needs not what anyone special ports open on their side, thought it was by default ports that where free... but I'm not a guy to network... so

  Have confirmd with vmware support that this question lies in the customer network, problem with the old hardware when it comes to router / firewall... need to update firmware

• Client VMware View Horizon and high DPI screens

  Hello

  I wonder if anyone has a solution for getting the customer view play nice with high DPI screens like those with screen resolution 3200 x 1800, or Apple 2880 x 1800 on the retina of Macbook 15 "screen resolution. View client does not seem to evolve properly, and the only solution seems to be to change the desktop screen resolution and then connecting display. I don't think that it is a very graceful difficulty, and my users are not too happy about it either.

  Thank you

  Ryan

  Hello

  Horizon customer 3.4 has experimental support for higher resolutions. It worked just great for me!

  By KevinK: http://www.kevink.org/?p=195

  JP

• Siri is able to bypass the screen lock

  I tried several times and I can confirm using Siri, is it possible to bypass the screen to lock to open the App Store / contacts etc. Is there no fix him?

  Evil. You will unlock the phone using the contact ID.

• could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

  could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

  You can watch the extension auto hide:

  AutoHide: http://www.krickelkrackel.de/autohide/

• bypassing the Welcome screen in windows xp pro

  I want to bypass the Welcome screen of windows on windows xp pro service pack 3. I tried control userpasswords2 and uncheck and check passwords.  I even tried to disable the Welcome screen.  I tried also even tried to change the type of connection to 0 in regedit, without success. I have 3 icons with no password.  so why is he still playing? Help.  should I delete all my icons connection that has no password.

  Hello
  See this link:
  http://www.Petri.co.il/disable_the_welcome_screen_in_xp_pro.htm
  http://www.Petri.co.il/bypass_the_welcome_screen_in_windows_xp.htm

• How to add the Web view in the screen.

  I want to add the text at the top of the screen and the Web view that open site in the lower part. Please help me that how can I do this.

  Thanks in advance.

  "I want to make the request and build BB JRE 4.7.

  No you don't really have.

  And you shouldn't, because:

  (a) as much as I know there is no performer 4.7 devices that cannot be upgraded to 5.0

  (b) the proportion of 4.7 devices autour is very small, so it is a small market

  (c) there is a lot of work

  (d) the results are not as good

  (e) a person on this forum will be able to help you.

  RIM do not support the OS 4.7 for WebView, so if nothing else has convinced you, it must give the impression that you should not try to develop for OS 4.7.

  Edit:

  Really should have said that it is just my opinion...

• bypassing the locked home screen

  I'm locked out, no password, no disc, cannot open the IRB to type in the race, but I thought I remember someone showing me theres a trick secret to bypass this screen, has something to do with the arrow next to the password box. is this true? What is the secret?

  Hello

  What do mean by locked out and no password?

  If you have forgotten your password:

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.
  12. etc.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Working with windows 8 or 8.1 and 5.3 view Horizon using the VMware customer 2.3.3) slow scrolling and hesitate

  I was wondering if it's something big or something right in the House.  When the wired or without wireless on Windows 8 and 8.1 (laptops / tablets), using the client to view Horizon 2.3.3 I get hesitation to scroll in Outlook 2010 and Excel more large spreadsheets, that I don't see on my Windows 7 machines using the same client.  Anyone else noticed this or fix?

  Thanks for the tips...

  I know it's a bit old, but found the fix for our windows users tablet 8.1.   On the client itself, we have removed the cache of the client completely do the following steps:

  Create a new file as below.

  C:\Users\vditest\AppData\Local\Teradici\pcoip_client_settings.txt

  and write this line in.

  PCoIP.enable_tile_based_image_caching = '0 '.

• I can see only the servers in a 'new window' or 'full screen.

  I have Windows Server 2.0 on can I Server 2008, and I can only see the servers in a 'new window' or 'full screen '. I want to select the server and have it open right in Internet Explorer without having to open a new window for each server (see screenshot). "When I select in the Console tab it tells me to ' click anywhere to open.

  I tried the things:

  -J' tried to unstall and reinstall and it works.

  -install and I tried browser Fire Fox.

  -tried the two port 8333 and 8222.

  Any ideas?

  Y at - it customer management console / I can install that does not use a browser?

  Host server Win 2008 without Hyper-V server.

  Address IP/name, enter 127.0.0.1:8333

  Enter your credentials in the user/pass fields.

  BTW. Check this - how to install 32 bit VIC on 64 bit system.

  J.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Problems with the servers from Adobe in Germany (Workflow: InDesign-> Content Viewer)

  We had some problems with the download of our fact sheets on Adobe servers end of January / beginning of February. Also our iPads test often could not connect to the content viewer. There are outages of server in Germany during this period?

  Updates are always displayed at http://status.adobedps.com/. You can check messages to see if all coincides with when you download problems.

  Neil

• bypass the Welcome screen

  I installed PSE9 on a new machine (Win 7).  I remember how to bypass the Welcome screen and go directly to the "editing window" when I opened elements. No problem in the past, but do not remember now. Thank you please - Hugh -.

  Create shortcuts to desktop with a right click on an empty area of the desktop and selecting 'New' in the popup, and then 'shortcut' menu in the following menu.  When you create the shortcut,

  Editor executable file is:

  "C:\Program Files (x 86) \Adobe\Photoshop elements 9\PhotoshopElementsEditor.exe.

  Executable file of the Organizer is:

  "C:\Program Files (x 86) \Adobe\Elements Organizer\PhotoshopElementsOrganizer.exe 9.

  ("\Program files" on 32 - bit systems.)

  Ken

• Viewer only appearing on-screen keyboard is not in the MenuBar in El Capitan

  Since the upgrade to El Capitan, I was unable to get the Visual keyboard observer option appears in the menu bar.

  I go to system-> keyboard preferences and check the box 'See the Emoji keyboard and viewers of symbol in the menu bar', and then nothing happens.

  No additional shows upward in the menu bar and if I click on another tab in the system preferences keyboard section (or go to another section of the preferences system and return to the Keyboard section), the "see the Emoji keyboard and viewers of symbol in the menu bar" box is not controlled.

  No matter how many times I try to check it out, it becomes immediately turned off when I leave the main tab in the keyboard preferences and then go back to him, and it does not add the keyboard Viewer option in the menu bar.

  For the life of me I can't understand what is happening.

  Try

   > System Preferences > keyboard > input methods > menu entry display enabled in the menu bar.